Kodi Community Forum

BIG THX @aracnoz for all your releases and for the continues support of DSPlayer. Because of you DSPlayer is not dead. Many THX.

@aracnoz

Buddy, as always, my deepest thanks to u

@aracnoz

Thanks again, great..

Wanilton

@aracnoz

Thanks so much for all you've done and for still keeping DSPlayer up-to-date! Very much appreciated!

@aracnoz
Thanks a lot.....

For play 4k UHD video with windows 10, i will try the x86 or x64?
Which is the best version?

Thanks again, aracnoz!

aracnoz, you are just awesome! thank you so much.

(2017-02-06, 17:26)aracnoz Wrote: [ -> ]Update Krypton Final:

06 February 2017 (x86-2ede90d) (x64-733b1c8)

• Added auto-update system and multi madVR versions support for the OSD Settings (from madVR 0.91.3)
  
• Added builtin addons repository.dsplayer and script.madvrsettings to manage the auto-update
  
• Added internal filters and madVR versions label in "System information - Video"
  
• Added DSPlayer tempo support
  
• Added partial support to 3D SBS / TAB (no subtitles)
  
• Added parameter "audiocodec" to define a <rule> in media rules configuration
  
• Added possibility to edit Internal LAV Video and LAV Audio formats settings (not recommended, use media rules and filter configuration)
  
• Added possibility to setup madVR Direct3D 9 / Direct3D 11 and Pre-Rendered frames parameters from the DSPlayer page
  
• Added possibility to upto 3 custom user settings (OSD Button "Save settings...") (Load and Save with DSPlayer database ONLY)
  
• Added possibility to load manually the saved settings (OSD Button "Load settings...") (Load and Save with DSPlayer database ONLY)
  
• Added possibility to load manually the saved settings by long-pressing the numbers from 0 to 7 (Load and Save with DSPlayer database ONLY)
  0: Load original settings
  1: Load from User settings #1
  2: Load from User settings #2
  3: Load from User settings #3
  4: Load from SD settings
  5: Load from 720p settings
  6: Load from 1080p settings
  7: Load from 2160p settings
  
• Updated DSPlayer dialogs Rules, Filters, Merits to autosave onClose / onBack
  
• Updated madvrsettings OSD Settings to support madVR 0.91.4 and above
  
• Updated internal LavFilters to v0.69 (DSPlayer version)
  
• Fixed crash by stopping while fast forwarding
  
• Fixed crash by stopping while DSPlayer playstart
  
• Fixed DSPlayer DialogProcessInfo to show the labels "Renderers" and "Filters" instead of "Deinterlace Method" and "Pixel Format"
  
• Fixed several crashes while DSPlayer play 4K/HEVC
  
• Fixed occasional bad resized DSPlayer window when play next video automatically
  
• Fixed VideoPlayer merits dialogs to use "VideoPlayer" string
  
• Fixed Media Rules to show the correct rule when using the priority order system
  
• Fixed inputstream.adaptive (x64)
  
• Fixed installer to use VS2015 C++ re-distributable Package fon win64 (x64)
  
• Fixed installer to install in "Program Files" (x64)
  
• General Improvements (x86 / x64)
  
• Merged with the official Kodi 17.0 Krypton Final
  

links at first page, ciauz

Wow! thank you so much!!!

K

Can anyone provide feedback on the stability of this release?

Wow great...
Thank you !

awesome thank you!

(2017-02-06, 22:17)Warner306 Wrote: [ -> ]Can anyone provide feedback on the stability of this release?

For now it seem more stable than the RC3 released a few weeks ago (which seems to be crashing quite often on my computer, usually once a video is fully played ). It seems at least as stable as the b6 released by Aracnoz.

Thanks again Aracnoz!

Thank You Thank You Thank You!

So I am having a similar problem in Kodi DS player regarding zoom. I have tried both of the below solutions with no luck. Slightly different from one of the users, I don't get the problem where it shows 1/4th of the screen. My problem is that it cuts off about 10-15% of the right side of the screen. As indicated by the previous user, going to windowed mode and back to full screen fixes this. However the OSD is still cut off short despite the picture now working properly. I figure I would come on here and give it one more try before switching from DS Player to MPC-HC.

I am using the newest final version of Kodi DS that came out a day or two ago. I am also using the newest version of Mad-VR. I I have tried both of the solutions below plus trying to run Kodi in Comptability Mode for Windows 7 in addition to disabling DPI Scaling. I have restarted numerous times. I had the same problem with the R6 Beta release and previous version of MadVR. Currently I only have the 2160p resolutions listed in MadVR as suggested below. Any suggestions? I would prefer to stick to Kodi DS is possible, but I also need my system to work properly! Thanks.

-Sayajin

(2016-09-17, 12:57)curael Wrote: [ -> ]

(2016-08-18, 11:31)blackbanana Wrote: [ -> ]

(2016-08-17, 22:08)Warner306 Wrote: [ -> ]You have increased the desktop zoom. That is why you can't see the entire dialog. This is probably a bug in DSPlayer. I don't know how to fix it without disabling the zoom.

Does MPC-HC work or does it also show the same problem? Try accessing video settings during playback to see if the zoom settings there have changed.

If you mean my desktop zoom in windows its set to 300% (default). I tried decreasing it to 100% but i still got the zoom problem in kodi and i cant have it on 100% anyway since my resolution is 3840x2160 and everything is to tiny at 100% zoom. If i press "\" button twice in kodi it works. But i would rather like it to work normally when i play a video without having to press "\" everytime i want to watch something.

IMAGE: http://imgur.com/a/zje6j

I would rather use DSplayer. But i will try with MPC-HC.

Right click Kodi and pick Properties, head to Compatibility tab and disable DPI scaling. Restart the PC. Also, if you're disabling DPI scale inside of Windows, or set it back to 100% you need to restart the PC for it to take effect. But disable it on Kodi so you can keep 300% on the rest of the OS. Let me know if this helps. Remember to restart the PC before you say it doesn't work. Cause it's usually the problem.

When you're using DPI scaling in general, you need to take this into consideration when ever you install an "older" application or a poorly optimized app, since they don't do well with scaling. I have had the issue with DSplayer and various emulators i.e. my PS1 emulator, it did the 1/4th of the screen thing too. Just have to disable DPI scaling directly on the app and it works great. Good luck.

(2016-08-18, 11:54)blackbanana Wrote: [ -> ]

(2016-08-17, 23:33)vicmanpergar Wrote: [ -> ]

(2016-08-17, 22:08)Warner306 Wrote: [ -> ]You have increased the desktop zoom. That is why you can't see the entire dialog. This is probably a bug in DSPlayer. I don't know how to fix it without disabling the zoom.

Does MPC-HC work or does it also show the same problem? Try accessing video settings during playback to see if the zoom settings there have changed.

For me this happens if I have previously defined 720 (24, 50, 60) as part of my TV resolution (that in fact, accept). The only way I have been able to make it work is just delete them, and only define the 1080 resolutions. Then the image is perfect no matter what.

Unbelievable it worked! Thank you!

Image: http://imgur.com/a/32TH9
Should i use these displaymodes or should i add some more refresh rates?

(2017-02-06, 22:17)Warner306 Wrote: [ -> ]Can anyone provide feedback on the stability of this release?

Seems rock solid using the x64 version (although, on 1st install, most of the MadVR dialogue boxes were blank/not visible, however, I installed the new x86 version, then reinstalled the new x64 version and all fixed.

Dsplayer lives.

K

Update - scrub the issue I highlighted above- when you run the update madvr seetings from the new repo, you need to close Koid and restart for the dialogue boxes to rebuild.