Kodi Community Forum
Maraschino (formerly HTPC Frontend) - a summary web interface for your XBMC HTPC - Printable Version

+- Kodi Community Forum (https://forum.kodi.tv)
+-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33)
+--- Forum: Supplementary Tools for Kodi (https://forum.kodi.tv/forumdisplay.php?fid=116)
+--- Thread: Maraschino (formerly HTPC Frontend) - a summary web interface for your XBMC HTPC (/showthread.php?tid=113136)



- DejaVu - 2011-12-12

Probably a silly question -
Have you got the port forwarded for Sickbeard in your router...?


- steve1977 - 2011-12-12

DejaVu Wrote:Probably a silly question -
Have you got the port forwarded for Sickbeard in your router...?

Nope, I am using reverse proxies. Also, to my surprise I actually get to see the upcoming shows although I entered the internal ip. Only thing that does not show up is the posters...


- Tkosh - 2011-12-12

I like the changes in the Application module but can use a way to launch web pages outside of the new window. The current setup make it almost impossible to use my iPhone to control Maraschino the way i could before the change. Maybe a choice on the application setup screen to give a choice to launch new page or in a window.


- mrkipling - 2011-12-12

Tkosh Wrote:I like the changes in the Application module but can use a way to launch web pages outside of the new window. The current setup make it almost impossible to use my iPhone to control Maraschino the way i could before the change. Maybe a choice on the application setup screen to give a choice to launch new page or in a window.

Don't worry, this will be going in v0.1 - I personally don't like this approach to opening apps.


- shadylog - 2011-12-13

Hi,

I just installed this app through wsgi, the only module that does not work is sabnzbd+.
I have it configured to disable api_key, and the url i used is:
http://localhost:8080/sabnzbd/api?
I used a ton of other variations..

I used the latest revision from:
git clone https://github.com/mrkipling/maraschino.git

When visiting the same api url i get access to the sabnzbd api however it says command unsupported. There are no network issues, and i have started maraschino in three ways and still haven't managed to get it to use sabnzbd.
I am using sabnzbd 0.6.10 on Debian and don't have any problems.

I am feeling that it just doesn't work, i restarted the app/apache numerlous times but the module does not show my sabnzbd ;(


- _Mikie_ - 2011-12-13

shadylog Wrote:Hi,

I just installed this app through wsgi, the only module that does not work is sabnzbd+.
I have it configured to disable api_key, and the url i used is:
http://localhost:8080/sabnzbd/api?
I used a ton of other variations..

I used the latest revision from:
git clone https://github.com/mrkipling/maraschino.git

When visiting the same api url i get access to the sabnzbd api however it says command unsupported. There are no network issues, and i have started maraschino in three ways and still haven't managed to get it to use sabnzbd.
I am using sabnzbd 0.6.10 on Debian and don't have any problems.

I am feeling that it just doesn't work, i restarted the app/apache numerlous times but the module does not show my sabnzbd ;(

Make sure that in sabnzbd you haven't ticked the box to disable the url. Also use the full api and no the nzb api. Hopefully on the next release the boxes input boxes are easier to use.


- gugahoi - 2011-12-13

shadylog Wrote:Hi,

I just installed this app through wsgi, the only module that does not work is sabnzbd+.
I have it configured to disable api_key, and the url i used is:
http://localhost:8080/sabnzbd/api?
I used a ton of other variations..

I used the latest revision from:
git clone https://github.com/mrkipling/maraschino.git

When visiting the same api url i get access to the sabnzbd api however it says command unsupported. There are no network issues, and i have started maraschino in three ways and still haven't managed to get it to use sabnzbd.
I am using sabnzbd 0.6.10 on Debian and don't have any problems.

I am feeling that it just doesn't work, i restarted the app/apache numerlous times but the module does not show my sabnzbd ;(

When you say "disable api_key". What exactly are you referring to? The module will never work without sab's api key.


- gugahoi - 2011-12-13

steve1977 Wrote:Thanks, this did the trick. Something is showing up. Looks quite ugly though and quite sure that this is not how it is supposed to be. Could someone post a screenshot how it is supposed to look like and can someone confirm that it does work with Chrome?

Thanks!

Do you mean the SB Module? How does it look for you?


- mrkipling - 2011-12-13

steve1977 Wrote:Thanks, this did the trick. Something is showing up. Looks quite ugly though and quite sure that this is not how it is supposed to be. Could someone post a screenshot how it is supposed to look like and can someone confirm that it does work with Chrome?

Thanks!

Could you please post a screenshot of how it looks for you? I'll be able to tell you if that's how it's supposed to be looking.

Also, I take it that you are using the master branch of the official repo? (mrkipling/maraschino)


- shadylog - 2011-12-13

gugahoi Wrote:When you say "disable api_key". What exactly are you referring to? The module will never work without sab's api key.

As in, in sabnzbdplus i disabled the api key, so it doesn't need it Smile

So what could be the problem?


- shadylog - 2011-12-13

Ah im very sorry. I see what the problem was, it works correctly but it doesn't show up if your not downloading anything Smile


- _Mikie_ - 2011-12-13

shadylog Wrote:As in, in sabnzbdplus i disabled the api key, so it doesn't need it Smile

So what could be the problem?

You probably shouldn't do that for security reasons..


- steve1977 - 2011-12-13

mrkipling Wrote:Could you please post a screenshot of how it looks for you? I'll be able to tell you if that's how it's supposed to be looking.

Also, I take it that you are using the master branch of the official repo? (mrkipling/maraschino)

Will do later. Safe to say that it is not supposed to be look like that. Issue is that posters don't show up. Same issue for most recent tv shows and movies.

Believe this is related to me using over reverse proxies outside my home network. It pulls data over API, but somehow fails to pull posters.


- mrkipling - 2011-12-13

steve1977 Wrote:Will do later. Safe to say that it is not supposed to be look like that. Issue is that posters don't show up. Same issue for most recent tv shows and movies.

Believe this is related to me using over reverse proxies outside my home network. It pulls data over API, but somehow fails to pull posters.

My apologies, I thought that we were talking about the SABnzbd module (posters do not feature in this module at any point).

It would appear that we are talking about the Sickbeard module, which is in the prerelease branch and nowhere near finished. I'd still appreciate a screenshot of what you're seeing as this will undoubtedly help me when reviewing later, but I've yet to even take a look at the Sickbeard module yet. It is nowhere near ready to be merged into the main (master) branch yet. All in good time! Smile


- thezoggy - 2011-12-13

hey gugahoi,

you'll be happy to know that we just added show.getposter and show.getbanner to the api.. this will now allow you to just use the api and not need sb username/pw anymore. however due to the nature of these commands returning images and not json.. you can not chain these commands.. but we figure this would be okay since generally you'd want to run the show.cache command first to know if the poster or banner being returned would be the default sickbeard one or not. these new commands are already pushed out to the master branch but the api-builder and api-doc updates are pending review until midget gets home from work.

also, the command 'shows' paused logic has been fixed.