[RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: Add-on Support (https://forum.kodi.tv/forumdisplay.php?fid=27) +---- Forum: Program Add-ons (https://forum.kodi.tv/forumdisplay.php?fid=151) +---- Thread: [RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC (/showthread.php?tid=124808) |
RE: [RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC - Maniaczm - 2012-03-27 (2012-03-27, 16:28)Aenima99x Wrote: Thanks for this addon, love it! Ever thought about doing one for CouchPotato too? I have a project set up on my PC for CouchPotato. I am weary of getting too deep into it until V2 of Couchpotato is released since the current version does not have an API. The V2 does have an API and I have an installation of it that I am using. Once that version is released or the API is finalized I will put more time into it. RE: [RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC - Maniaczm - 2012-03-27 (2012-03-27, 06:56)bluenote Wrote: Hey thanks for the response. Accidentally deleted my first response to this, so this one may be shorter . I will look into that issue, never seen it before. Can you attached a log file of the error? And as for the precedence I need to use the XBMC library already for the artwork for that new feature, so I will be using that for the info as well if it exists.. just easier. If it doesn't exist in XBMC or the show is yet to be aired I will get it from Sickbeard. Either way I am trying to make it to where if the info/art is available in any way, shape, or form then the plugin will display it. RE: [RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC - bluenote - 2012-03-28 (2012-03-27, 20:14)Maniaczm Wrote:(2012-03-27, 06:56)bluenote Wrote: Hey thanks for the response. Hey thanks for the response. I will get a log tonight or tomorrow. On the precedence issue, I'd just like to offer my reasoning - I find that viewing the info that sickbeard has will often shed light on problems with downloading, or misidentified episodes, in particular when it involves episode disagreements or changes from TVDB. In any other case I would argue that inside xbmc it would make sense to use xbmc data, but in this unique niche , if one approaches it from the standpoint of troubleshooting - then I think it becomes more important to be able to see the data that sickbeard sees, rather than what xbmc sees. (They can be different in my experience!). Anyways I won't harp on it further Looking forward to being able to "add shows" and otherwise manage sickbeard through xbmc! Not looking forward to the GF wanting to add shows and otherwise manage sickbeard though EDIT: Here's an excerpt from the log: Code: 17:55:45 T:1416 DEBUG: ------ Window Init (DialogKeyboard.xml) ------ And here's the pastebin: http://pastebin.com/k16DyYqd RE: [RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC - Aenima99x - 2012-03-28 (2012-03-27, 20:02)Maniaczm Wrote:(2012-03-27, 16:28)Aenima99x Wrote: Thanks for this addon, love it! Ever thought about doing one for CouchPotato too? Yup I'm using v2 of CP now, looking forward to seeing what you come up with for that. RE: [RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC - ursli - 2012-04-04 Would it be possible to add the backlog view to your plugin? That is the only thing I'm still opening the browser for when I'm on my htpc. sometimes it's nice to know what sickbeard is still searching for. RE: [RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC - breen - 2012-04-07 Hi, thanks for this plugin. Unfortunately, I cannot get it to work with a custom URL. If I set sickbeard to the default of http://ip:port, the plugin works fine, however, I normally use http://ip/tvshows as the url. With that set and using the custom URL, here is the errors in xbmc.log, when, for example, clicking on 'Manage Shows': Code: 22:05:06 T:2140 NOTICE: -->Python Interpreter Initialized<-- Thanks again, been looking forward to a plugin like this. RE: [RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC - Uncle Ned - 2012-04-07 I cannot connect to Sickbeard. It runs as localhost:8081 on my Mac. The IP is 192.168.1.137. But when I enter that, I get an error. The same IP works for the XBMC/ATV2 to access the external drives connected to my Mac. I've tried 192.168.1.137 and http://192.168.1.137 plus the port number. Neither works. Any suggestions? I generated an API key and am not currently using a username and password for Sickbeard. * Problem solved: I restarted Sickbeard manually. Now it works. RE: [RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC - Maniaczm - 2012-04-10 Hey everyone, Sorry I have been absent for a while but I have had some personal stuff come up that has limited my free time. I have not abandoned this project but it will be a little bit longer before I start back up. Sorry for the delays in resolving these issues and responding to feature requests. I will keep everyone posted on my renewed efforts once I get back to this project. Thanks for your patience. RE: [RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC - Mad Medik - 2012-04-13 Can't believe you would allow personal issues to interfere with spending hours of your time to create freeware for us. :-P lol Great concept. Thanks for your work Maniaczm. I have recently installed Sickbeard and SAB+ on a box that is running as a front end for one room and back end for the whole house. On that computer, the apps refer to each other as localhost, instead of by the IP. So with that in mind, here's my difficulty - Sickbeard, SAB and XBMC running on PC box. XBMC running on another box in room 2. The Room 2 XBMC seems to be updating fine, but the Room 1 XBMC is not being updated properly. I have tried using the IP and tried localhost but no luck. Sickbeard and SAB+ are communicating with each other. I can't use the notification test in Sickbeard/SAB+ because I have to exit XBMC on the box to access them. Both boxes are running Ubuntu 11.10. So in short, when trying to run the plugin in XBMC on the same box as Sickbeard and SAB+, is it working? Are you using localhost or the IP address? Thanks! RE: [RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC - Aenima99x - 2012-04-13 (2012-04-13, 21:58)Mad Medik Wrote: So in short, when trying to run the plugin in XBMC on the same box as Sickbeard and SAB+, is it working? Are you using localhost or the IP address? I have SAB/SickBeard/XBMC all running on the same box and the plugin works fine for me. I have it using the IP. Do you by chance have a web_root set in the SickBeard config.ini? If so, then set the port setting in the plugin with that info. For example, in my SickBeard config.ini the web_root is set as /tv, so in the port settings in the plugin I have 9003/tv RE: [RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC - paulrus - 2012-04-15 I'm dying to make this work, but I'm having a problem. My Sickbeard is setup as localhost:8181 and not with an IP. I cannot figure out any way to configure this plugin to work. Can anyone give me an idea of how I can fix this? I've actually tried connecting to Sickbeard by IP but it doesn't work at all on my network. I'm not entirely sure why, but since localhost works great I figured I wouldn't mess with it. Thanks, Paul RE: [RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC - darthdiablo - 2012-04-16 paulrus: if Sickbeard is on the same machine as XBMC, try using 127.0.0.1? RE: [RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC - paulrus - 2012-04-16 I tried. I cannot use a numerical address. It absolutely has to be localhost. Isn't there any way to alter the plugin to accept localhost? RE: [RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC - darthdiablo - 2012-04-16 On my machines at home and at work, 127.0.0.1 and localhost is synonymous. My Sickbeard also uses "localhost" address, but I have no issue using 127.0.0.1 since it means the same thing as localhost (at least on my machine). do a 'ping localhost' and see what IP address you get. That in theory is the numerical ip address you should be able to use. Are you getting 127.0.0.1 as well? Stupid question - you're also setting port number correctly as well? (8181)? I would have put 127.0.0.1 in IP field, and 8181 in the port field. And does your Sickbeard require login? RE: [RELEASE] Sickbeard XBMC - Control Sickbeard from XBMC - paulrus - 2012-04-16 Ive pretty much read the entire thread already before posting. Pinging localhost gives me a reply from ::1: which is just weird. Pinging 127.0.0.1 works, but I cannot log in to 127.0.0.1:8181 If I try 127.0.0.1 it gives me mt XBMC login on port 80, but sickbeard only works with localhost:8181. I've tried using the IP and port fields, I've tried using localhost and the ports, I've even tried the IP assigned by my router 192.168.1.7 and 8181. I've tried them all with and without http:// as well as trying all of those permutations under custom URL. None of it worked. I've also tried it with and without user/password. I'm stumped. Paul |