[Windows] New build - slight problem on receiver - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Discussions (https://forum.kodi.tv/forumdisplay.php?fid=222) +--- Forum: Hardware (https://forum.kodi.tv/forumdisplay.php?fid=112) +--- Thread: [Windows] New build - slight problem on receiver (/showthread.php?tid=163746) |
[Windows] New build - slight problem on receiver - JohnP - 2013-04-30 Ok, so here's the build I ended up going with: Silverstone MILO ML03 case Asus F2A85-M motherboard (Went with this instead of the A55 for the HDMI out) AMD A4-5300 APU Raidmax 380W ATX power supply 4 G Kingston HyperX memory, 1333 (2 2G sticks) Asus Internal 24x DVD-RW optical drive 100 meg SATA 1.5 HDD (Swiped it from an older computer, was basically being idle) Generic USB wireless mouse/keyboard combo I had intended to put it into the media closet I'm building, but the wife preferred it being out, and it made it a little easier to work the controlling of it. All of it (Not including the OS, I had that to cannibalize from an unused system) came to a shade over $300. I'm running the most recent build of XBMC on top of Windows 7 Ultimate, connected via HDMI to the Aux HDMI port on an Onkyo HT-RC260. Sound and graphics are amazing, it's quiet (Even running out on the floor unenclosed during testing), I only have one weird thing. When the cable is plugged in, my XBox will not boot. As soon as I remove the HDMI to the server, it will boot. And when I switch back to the cable input (Haven't switched it off yet), I get audio but no video. Is this something with the cable? Bad HDMI port on the Onkyo? Any ideas? John |