(2015-10-11, 22:13)Warner306 Wrote:

(2015-10-11, 10:13)gotham_x Wrote: Thanks for your feedback, if you have implemented the right way, content to 1080p> 1080p, with a setting of chroma upscaling set for example with super-xbr150 + AR (High Processing), you should seize substantial differences in the level of an image better output, by contrast, with a setting of chroma upscaling set with NNEDI3 (Maximum Processing) 32/64/128 neurons in this case only for 1080p content you are watching, is that correct? but as suggested, focus on setting (High processing) to content to 1080p and double image with mixed content 1080p / 720p processing algorithm NNEDI3.
So in this case, mixed content at 1080p / 720p would be enough to set only one profile in the profile madVR as suggested?

The profile posted would be for 720p content. 1080p videos could use NNEDI3 with high neurons because image upscaling is unnecessary. 720p would be all about image doubling and upscaling refinement, so chroma upscaling could be reduced.

I would recommend pushing your graphics card with each profile if you have the room.

(2015-10-13, 08:09)alturismo Wrote: thanks for the tipps, may i ask about sep. profiles, any chance they will come to internal profiles (example: save for 1080i content ...)

or then only possible to use with madvr settings ?

thanks ahead

(2015-10-13, 13:48)gotham_x Wrote:

(2015-10-11, 22:13)Warner306 Wrote:

(2015-10-11, 10:13)gotham_x Wrote: Thanks for your feedback, if you have implemented the right way, content to 1080p> 1080p, with a setting of chroma upscaling set for example with super-xbr150 + AR (High Processing), you should seize substantial differences in the level of an image better output, by contrast, with a setting of chroma upscaling set with NNEDI3 (Maximum Processing) 32/64/128 neurons in this case only for 1080p content you are watching, is that correct? but as suggested, focus on setting (High processing) to content to 1080p and double image with mixed content 1080p / 720p processing algorithm NNEDI3.
So in this case, mixed content at 1080p / 720p would be enough to set only one profile in the profile madVR as suggested?

The profile posted would be for 720p content. 1080p videos could use NNEDI3 with high neurons because image upscaling is unnecessary. 720p would be all about image doubling and upscaling refinement, so chroma upscaling could be reduced.

I would recommend pushing your graphics card with each profile if you have the room.

Thanks Warner, always available to help make it clear in certain situations, such as that in this case, with the recommended settings for Scaling Algorithms, to my eyes seemed a bit 'too low profile for just content to 1080p for a graphics card of a certain level like the GTX 970.
The fact is that I have misunderstood, obviously have a profile content to 720p, it approffitta if you can suggest a profile for SD content for my GTX 970
Thank you in advance.

• Chroma: super-xbr150 + AR
  
• Image: Jinc3 + AR
  
• Luma Doubling: 1.5x or greater - NNEDI3 32 to 256 neurons
  
• Chroma Doubling: Off
  
• Downscaling: Catmull-Rom + AR + LL
  
• Upscaling Refinement: SuperRes (strength: 1)
  
• Artifact Removal - Debanding: Medium/High
  
• Image Enhancements: Off
  
• Dithering: Error Diffusion 2
  

(2015-10-13, 18:27)XTrojan Wrote: So, has XySub development ended, or whos taking care of it now?

Regarding 24P stuttering i've been messing with for an eternity it's simply a problem with the TV (CCFL Backlit) that's not fixable.

Has anyone tried 24P with the newer Samsung TVs(European Models) with MadVR and no judder/jaggy/stutters?
I'm having hesitation about buying European TV Models since the Motion plus is often incompatible with 24Hz when running via HTPC. 1000 Divided by 24 = uneven.

(2015-10-13, 17:37)hu1kamania Wrote: Potential bug:

Missing the LAV Audio Filters internal option to set "Enable Audio Delay". When I load the LAV Audio interface through the DSplayer sub-menu in Kodi the "Enable Audio Delay" option will not save after hitting "apply", and "ok". If I set the option through the LAV Audio interface menu after I start a video the option stays put until I close out the video and start a new one.

I don't know where the options are saved to, or I would try to set the Audio Delay from the configuration file. With LAV + MPC-HC it's in the registry, but I could not find a corresponding option for DSPlayer.

Thanks!

(2015-10-13, 19:54)Knight77 Wrote: - When I pause the video or use osd to dowload subs and the skin osd comes up I noticed that the GPU usage % quickly rise to a very high level so the video card fans start spinning like crazy and the ones of the case follow the same behavior. I'm using the last version of the installer. Why? How to solve it??

(2015-10-13, 19:54)Knight77 Wrote: - I noticed that the player doesn't load the subs included in the mkv but only the external ones. If I select the "included" subs via osd or yatse anyway doesn't play them.
Thanks!

(2015-10-13, 20:41)hlina Wrote: With the latest Version of dsplayer-Kodi I am getting the following error:

creating direct3d device failed (80070005)

Error message is shown on a black screen when I want to start playing a video.
The problem occurs only on my secondary monitor, but playing movies works fine on primary screen. I have a GTX960 graphics card and the computer monitor (primary display), a beamer (secondary display) and also a TV connected to it.OS is windows 10 64 bits.


Any ideas?
-Thanks!

(2015-10-13, 23:15)aracnoz Wrote:

(2015-10-13, 19:54)Knight77 Wrote: - When I pause the video or use osd to dowload subs and the skin osd comes up I noticed that the GPU usage % quickly rise to a very high level so the video card fans start spinning like crazy and the ones of the case follow the same behavior. I'm using the last version of the installer. Why? How to solve it??

i just noticed this today and reported to madshi because this it's a madVR situation since madVR 0.89.3, with madVR 0.89.2 for me there is not an high gpu load while pause

can you also confirm this behavior with your setup?

(2015-10-13, 19:54)Knight77 Wrote: - I noticed that the player doesn't load the subs included in the mkv but only the external ones. If I select the "included" subs via osd or yatse anyway doesn't play them.
Thanks!

madVR 0.89.6 had some problem to show internal subtitles, if you are using this version you should update to the latest one

(2015-10-13, 20:41)hlina Wrote: With the latest Version of dsplayer-Kodi I am getting the following error:

creating direct3d device failed (80070005)

Error message is shown on a black screen when I want to start playing a video.
The problem occurs only on my secondary monitor, but playing movies works fine on primary screen. I have a GTX960 graphics card and the computer monitor (primary display), a beamer (secondary display) and also a TV connected to it.OS is windows 10 64 bits.


Any ideas?
-Thanks!

(2015-10-13, 23:15)aracnoz Wrote:

(2015-10-13, 20:41)hlina Wrote: With the latest Version of dsplayer-Kodi I am getting the following error:

creating direct3d device failed (80070005)

Error message is shown on a black screen when I want to start playing a video.
The problem occurs only on my secondary monitor, but playing movies works fine on primary screen. I have a GTX960 graphics card and the computer monitor (primary display), a beamer (secondary display) and also a TV connected to it.OS is windows 10 64 bits.


Any ideas?
-Thanks!

have you enabled "adjust refresh rate" in kodi? if yes you should try to handle these things only by madVR trayicon in display mode

anyway you should check if this it's happening also with dvdplayer because it could be a kodi problems not related to dsplayer

(2015-10-14, 07:13)spencerjford Wrote: I'm wondering if you have installed/updated directx?

(2015-10-13, 18:27)XTrojan Wrote: So, has XySub development ended, or whos taking care of it now?