(2016-02-15, 11:08)gotham_x Wrote: For (Image Doubling) 1280 x 720 -> 1080p I always left this setting disabled on my system, perhaps with new algorithms for (Image Doubling) something to experiment with SSIM!?!? I have not experienced in image optimization, I think that with my system GPU GTX970 and CPU i7-6700K, not OC there is a good load to support this.

(2016-02-15, 12:15)mrhyde1969 Wrote: Hi.
I have just started playing around with this build because of frame rate switching and frame skipping problems I had with standard kodi player. How.do I check to see what's going on with the video renderer? ie pressing "O' doesn't display what frame drops.or skips ect. Also I had problems with certain True HD files both star trek reboots for example, sound.suffers from serious popping and crackling but with the latest jarvis builds that dissapeard but it has resurfaced using this build. .any ideas what's causing this? Many thanks. I am totally new to madvr

(2016-02-15, 12:02)oldpoem Wrote:

(2016-02-15, 11:08)gotham_x Wrote: For (Image Doubling) 1280 x 720 -> 1080p I always left this setting disabled on my system, perhaps with new algorithms for (Image Doubling) something to experiment with SSIM!?!? I have not experienced in image optimization, I think that with my system GPU GTX970 and CPU i7-6700K, not OC there is a good load to support this.

I'd say get yourself more experienced then. Nothing better than try and see for youself whether your system can handle it or it is really actually better visually. It could be a lot of fun.. (or a lot of headache)

(2016-02-15, 12:17)oldpoem Wrote:

(2016-02-15, 12:15)mrhyde1969 Wrote: Hi.
I have just started playing around with this build because of frame rate switching and frame skipping problems I had with standard kodi player. How.do I check to see what's going on with the video renderer? ie pressing "O' doesn't display what frame drops.or skips ect. Also I had problems with certain True HD files both star trek reboots for example, sound.suffers from serious popping and crackling but with the latest jarvis builds that dissapeard but it has resurfaced using this build. .any ideas what's causing this? Many thanks. I am totally new to madvr

Ctrl+J bring up madvr on screen information. Don't know about TrueHD though.

(2016-02-15, 02:06)Warner306 Wrote:

(2016-02-15, 01:54)danjames92 Wrote: Using latest Kodi DSPlayer if I start playback, audio starts, I get a drop of audio for about 1.5s then the audio re-engages. Display set to 24Hz, content is 24Hz, only happens with some media. Using Reclock to get perfect PCM. No passthrough here. Using 250ms advancedsettings edit to get perfect lipsync on Windows 10 (specs in signature)

If I provide a debug log, will someone be able to steer me in the right direction and show me what I can do to prevent that?

It is probably ReClock's fault. You could play around with the settings, but I'm not sure what I would change. I am using sanear to bitstream with a custom resolution as an alternative. Not that ReClock is a bad idea; it is just prone to the occasional error.

I would stick with ReClock, but information on Custom Resolutions is found at the end of this section: 1966566 (post).

(2016-02-15, 11:08)gotham_x Wrote:

(2016-02-15, 01:04)oldpoem Wrote:

(2016-02-14, 20:05)gotham_x Wrote: I have a lot of content with resolution 1280 x 720 -> 1080p, it is advisable activate (Image Doubling)?
(Image Doubling) availment only for SD
(Image Doubling) Currently I setting to Off

Up to your system, Personally I disable this and enable some other features in image enhancement area. If you have spare load then try it for yourself. But I fell it wouldn't worth it on my system if I had to disable others to compensate the extra load.

For (Image Doubling) 1280 x 720 -> 1080p I always left this setting disabled on my system, perhaps with new algorithms for (Image Doubling) something to experiment with SSIM!?!? I have not experienced in image optimization, I think that with my system GPU GTX970 and CPU i7-6700K, not OC there is a good load to support this.

(2016-02-15, 21:42)danjames92 Wrote:

(2016-02-15, 02:06)Warner306 Wrote:

(2016-02-15, 01:54)danjames92 Wrote: Using latest Kodi DSPlayer if I start playback, audio starts, I get a drop of audio for about 1.5s then the audio re-engages. Display set to 24Hz, content is 24Hz, only happens with some media. Using Reclock to get perfect PCM. No passthrough here. Using 250ms advancedsettings edit to get perfect lipsync on Windows 10 (specs in signature)

If I provide a debug log, will someone be able to steer me in the right direction and show me what I can do to prevent that?

It is probably ReClock's fault. You could play around with the settings, but I'm not sure what I would change. I am using sanear to bitstream with a custom resolution as an alternative. Not that ReClock is a bad idea; it is just prone to the occasional error.

I would stick with ReClock, but information on Custom Resolutions is found at the end of this section: 1966566 (post).

I'm not using bitstreaming though...

(2016-02-15, 13:44)mrhyde1969 Wrote:

(2016-02-15, 12:17)oldpoem Wrote:

(2016-02-15, 12:15)mrhyde1969 Wrote: Hi.
I have just started playing around with this build because of frame rate switching and frame skipping problems I had with standard kodi player. How.do I check to see what's going on with the video renderer? ie pressing "O' doesn't display what frame drops.or skips ect. Also I had problems with certain True HD files both star trek reboots for example, sound.suffers from serious popping and crackling but with the latest jarvis builds that dissapeard but it has resurfaced using this build. .any ideas what's causing this? Many thanks. I am totally new to madvr

Ctrl+J bring up madvr on screen information. Don't know about TrueHD though.

Thanks for that. On further though I think it may be atmos encoded material that's giving me this issue .I am sure both of the star trek revamps have true hd atmos soundtracks

(2016-02-15, 13:44)mrhyde1969 Wrote:

(2016-02-15, 12:17)oldpoem Wrote:

(2016-02-15, 12:15)mrhyde1969 Wrote: Hi.
I have just started playing around with this build because of frame rate switching and frame skipping problems I had with standard kodi player. How.do I check to see what's going on with the video renderer? ie pressing "O' doesn't display what frame drops.or skips ect. Also I had problems with certain True HD files both star trek reboots for example, sound.suffers from serious popping and crackling but with the latest jarvis builds that dissapeard but it has resurfaced using this build. .any ideas what's causing this? Many thanks. I am totally new to madvr

Ctrl+J bring up madvr on screen information. Don't know about TrueHD though.

Thanks for that. On further though I think it may be atmos encoded material that's giving me this issue .I am sure both of the star trek revamps have true hd atmos soundtracks

(2016-02-15, 23:51)mrhyde1969 Wrote:

(2016-02-15, 13:44)mrhyde1969 Wrote:

(2016-02-15, 12:17)oldpoem Wrote: Ctrl+J bring up madvr on screen information. Don't know about TrueHD though.

Thanks for that. On further though I think it may be atmos encoded material that's giving me this issue .I am sure both of the star trek revamps have true hd atmos soundtracks

What am I looking at with the on screen information to see if I am getting perfect audio and.video sync?

(2016-02-13, 18:22)Wanilton Wrote: Kodi Jarvis RC4 + dsplayer with all update until now (02/13/2016)

link for download:

https://dl.dropboxusercontent.com/u/77993366/KodiSetup-jarvis.dsplayer-rc4-02.13.2016.14.20.dx11.exe

Update internal lav filters for version 0.67.0-80 (02/13/2016).

Warnings:
- This is an unofficial Kodi build not from Team Kodi.
- This build comes with no warranties, explicit or implied, and you use it at your own risk.
- This build was compiled by Wanilton, for use only in Windows OS, and have same functions official Kodi Jarvis build Nightly + dsplayer support.

git:

https://github.com/mediaBrasil/xbmc/tree/master_dsplayer

(2016-02-14, 17:38)Tamuro Wrote: On the topic of audio, I'm a little old school so I'm still running 5.1 analog not HDMI as my Pre-amp is an Anthem AVM30 which doesn't have HDMI in. And I'm not about to stop using it because it is a very good Pre-amp. So my question is, how do I go about setting up Kodi DSPlayer/Windows to insure that I'm sending the lossless audio to my sound card(sound blaster zxr) then out to my Pre-Amp?

(2016-02-16, 04:26)Tamuro Wrote:

(2016-02-14, 17:38)Tamuro Wrote: On the topic of audio, I'm a little old school so I'm still running 5.1 analog not HDMI as my Pre-amp is an Anthem AVM30 which doesn't have HDMI in. And I'm not about to stop using it because it is a very good Pre-amp. So my question is, how do I go about setting up Kodi DSPlayer/Windows to insure that I'm sending the lossless audio to my sound card(sound blaster zxr) then out to my Pre-Amp?

Anybody have some input on this or is everybody using HDMI? Grrr I hate HDMI.

This might be a dumb question but, with using DSPlayer with internal and external filters/renderers can I use different skins or was the DSPlayer coded to work only with default skins?