XBMC Tuxbox Enigma Stream Client (Enigma / Enigma2 Based Dreambox & Dbox2) - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Development (https://forum.kodi.tv/forumdisplay.php?fid=32) +--- Forum: Kodi Application (https://forum.kodi.tv/forumdisplay.php?fid=93) +--- Thread: XBMC Tuxbox Enigma Stream Client (Enigma / Enigma2 Based Dreambox & Dbox2) (/showthread.php?tid=23834) |
- freezy - 2007-04-08 i figured but thanks for the hints. - stromrickard - 2007-04-16 Can anyone provide any info on how good (problemfree) the streaming from the DM500-T really is? I read about lots of ppl saying it works great but even more ppl complaining that it doesn't work as it should (sometimes no picture, gets stuck on buffering, pixelated picture and so on). Even the site that sells streamts says that it still can hapen but not as often... The question here is if the ppl that claims it works fine doesn't mind minor problems or if they just use the right setup or if they're just lucky? I have 2 TV's with one xbox each. I was thinking of buying a DM500-T and just connect it in my network and not any of my TV's and then stream to the xboxes (i understand that both at the same time will probably not work) and record TV to my HTPC. Can i expect this to work ok? - stromrickard - 2007-04-17 Another question... Does subtitles work? - freezy - 2007-04-17 i must say i'm a complete dreambox newbie, but anyway here's my experience (with a dm500c):
i must add that i didnt spent hours or these issues yet. maybe some quick comments from other ppl or GeminiServer would help? recording stuff on pc is working pretty well, tried streamview and the results are good. in my case there are still some not too disturbing artifacts, but that can also be due to my crappy 5m antenna cable to the dreambox. i don't have it connected to a tv, so i can't check if they are on the scart output too (which would mean it's not streamts' fault). - ultrabrutal - 2007-04-17 1. zapping is not possible yet. not sure how far gemini is with the new features though 2. deinterlace gives a bad result I think. I use bob which looks the best in my opinion. however for dvd's etc I use auto/none. So yes there should be a setting for tuxbox so you wouldn't have to jump back and furth 3. I have the "cannot zap" problem too 4. in AdvancedSettings.xml you can set up some advanced features, however the audio menu does not work for me. Not sure if it's incomplete or what's going on - stromrickard - 2007-04-17 I'm very greatful for your input. Was a bit afraid of this. From what i can find on different dreambox forums this seems to be common problems so i highly doubt that this is xbox-related. I'll probably wait until DM600T is available and see if it works any better (should have more ram but same cpu). Hopefully the tuxboxclient will have some more nice features then as well. It doesn't sound like it's completly gf-friendly yet =) Big thanks to Gemini for putting in such great work. - freezy - 2007-04-18 yeah, i guess the WOF (women acceptence factor) could still improve otherwise, great work! - pt-1 - 2007-04-20 @GeminiServer I would love if you could support Neutrino too If I understood correctely in the Tuxbox Board you were missing the XML EPG option. Get list of all Bouquets: Code: http://192.168.178.7/control/getbouquets 1 My Favorites 2 ARD 3 ZDF Nachrichten Doku 4 Private 5 ORF 6 Arena 7 Premiere Content of a Individual Bouquet: Code: http://192.168.178.7/control/getbouquet?bouquet=2&mode=TV 7 44d00016dca Das Erste 8 500850701 DAS VIERTE 9 43100016e29 EinsExtra 10 43100016e2a EinsFestival 11 43100016e2b EinsPlus 12 43100016e47 SDWEST Ferns. RP 13 44d00016dcc hr-fernsehen In Above example the number before the Channel ID Represents the Channels Position in the Bouquet. Das Erste is on position 7 To see the EPG for now for each Channel in this Bouquet: Code: http://192.168.178.7/control/epg Code: 44d00016dca 309903955495397577 Sportschau live Get EPG for a Channel in XML Format: Code: http://192.168.178.7/control/epg?xml=true&channelid=44d00016dca%20d&details=true&max=1[code] Above can be specified with the max Parameter. My example uses 1 as the EPG for now. To built an URL for the DVB Stream: Code: http://192.168.178.7/control/build_live_url Code: http://192.168.178.7:31339/0,0x0000,0x0000,0x0000 More Information here: http://cvs.tuxbox.org/tuxbox/apps/tuxbox/neutrino/daemons/nhttpd/doc/nhttpd_controlapi.html?rev=1.2# - stromrickard - 2007-04-21 Saw a post on another forum (dreamboxx.nu) from a guy who got hold of a 600C. Seems changing channel and streaming worked fine. Recording to PC gave artifacts. Nobody knows if subtitles works or not? - finas - 2007-04-21 works with Gemini 3.5, just released. - GeminiServer - 2007-04-22 @pt-1 thank's for the information, if i found time i'll look @it @stromrickard there is no support for subtitles with tuxbox client @freezy Quote:i didnt found out yet how to zap from channel to channel without going back to the menulet's see what i can do @ultrabrutal Quote:"cannot zap to channel..." issueafter switch or zap from one channel to another one, the tuxbox device will sometimes return wrong or empty channel (stream) inforamtions.. without any info data the stream can't start.. therefore you'll get a zap failed.. - ultrabrutal - 2007-04-22 GeminiServer Wrote:after switch or zap from one channel to another one, the tuxbox device will sometimes return wrong or empty channel (stream) inforamtions.. without any info data the stream can't start.. therefore you'll get a zap failed.. Ok, how about trying a few times before failing perhaps with a small sleep in between if needed. Maybe the devs of Gemini project can fix this if you explain to them what is wrong. That would probably be better Thanks and keep up the good work. Can't wait for future features to be added - k-pax - 2007-04-22 finas Wrote:works with Gemini 3.5, just released. What type of DB do you have? I have just started to use a DM500c, and have problems with artifacts when streaming to my xbox with the TuxBox client, the same when recording to HDD. I have tried Gemini 3.5 (who by the way is labeled streamts_fix in the name), but I see even moore artifacts on my xbox with it. Is it someone else here that use a DM500 that can confirm worse quality using Gemini 3.5 and TuxBox client? - finas - 2007-04-22 I'm using DM-7020. I have not played with it much. - pt-1 - 2007-04-24 Gamester17 Wrote:PS! Maybe off-topic but I have to ask, is there any chance of you helping to add the standard XMLTV TV-Guide to XBMC's SVN in a branch and then maybe add a .xmltv listing grabber/converter for the Dreambox EPG (Electronic Program Guide)? (either in XBMC client-side or on the Dreambox server-side), that way Dreambox owners could also get and view the TV listings for their Dreambox channels through the Xbox, maybe enable channel-switching through that TV-Guide too. Then later, sheduling and recoding could be made through that TV-Guide as well, (if it was extended to be able to do so) Hi, a user I know is working on something simular to enable the Dbox2 Neutrino to have external EPG on for example 28.2 (Sl<yUK) For the UK for example you could use: http://freevo.sourceforge.net/cgi-bin/doc/XMLTVUK FreddyFrog wrote a Perl & Windows application for this to suit the Dboxes bouquets.xml and services.xml as Neutrino needs the channel desccriptor being formed out of the tsid onid and something else I can't just remember ;-) You find the tool here http://www.njlworld.com/~pt1/epg_dbox/freddyfr0g20070420-3.zip @GeminiServer What IRC Channel are you normally on |