Linux Dualshock 3 not working ? - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Discussions (https://forum.kodi.tv/forumdisplay.php?fid=222) +--- Forum: Hardware (https://forum.kodi.tv/forumdisplay.php?fid=112) +--- Thread: Linux Dualshock 3 not working ? (/showthread.php?tid=271885) |
Dualshock 3 not working ? - gordie - 2016-04-30 Hi guys ! I'm running OpenELEC-Generic.x86_64-6.95.2 on an intel NUC6I3SYH. A friend lent me a Dualshock 3 controller to give a try with. I activated Bluetooth, put the controller on USB, removed the USB, then the controller was recognized and worked. Quite nice ! So I bought two Dualshock 3. I connected them the same way. They are both recognized as "Playstation®3 Controller" and OpenElec says they are "connected". But... They are not working, and after a while they disconnect. I did try to delete the 3 controllers in OpenElec, and re-connect them : again, they are all recognized, but only my friend's one is working. I can't understand why... I hardly doubt mine are fakes, since they look exactly the same, but I start to be afraid since I read a lot of topics about fake controllers. Still, mine seem to be officials. Buttons feel the same, texture is the same, I can't spot anything different; except what's written on the back sticker : The working one is model n°CECHZC2E, 3.7V, 300Ma. The non-working ones are model n°CECHZC2U a1, 5V, 500Ma. BTW, In OpenELEC, next to the devices, mine have a keyboard icon while my friend's one as a dualshock icon. Can someone help me ? Thanks ! RE: Dualshock 3 not working ? - DarrenHill - 2016-04-30 Thread moved to hardware RE: Dualshock 3 not working ? - gordie - 2016-04-30 I can confirm I got a clone, from Gasia Co.,Ltd. Any chance to make it work with OpenELEC ? RE: Dualshock 3 not working ? - Matt Devo - 2016-04-30 Might be as simple as adding the PCI ID to the driver, so it's recognized as a dual shock controller vs a generic HID device. |