dvbviewer recording services upnp xbmc stops - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111) +---- Forum: Windows (https://forum.kodi.tv/forumdisplay.php?fid=59) +---- Thread: dvbviewer recording services upnp xbmc stops (/showthread.php?tid=62151) |
dvbviewer recording services upnp xbmc stops (Beta 2 log added) - mario.rossi - 2009-11-22 I've tried to use XBMC alpha2 as upnp client of dvbviewer recording services 1.5.0.31. Configuration is ok but viewing the stream have this behavior: - Select channel for first time: ok - Change channel: xbmc stops responding If xbmc doesn't stop none is displayed and changing channel again produce the hang or a xbmc message "too many errors". Same behavior with "repack2" windows release. Any idea? Thanks Added on 12/12/2009 I tested either the Beta 2 release and founded same problem. Developers can find xbmc 9.11B2 log in: http://pastebin.com/m4f42bfa2 Platform: Windows 7, XBMC 9.11B2 fresh installation only upnp video server configured Step used to produce log (start form a preconfigured upnp dvb source) - Open upnp source in video menu - navigate into channels list of upnp source - selected a FTA channel (RAI1) -> show ok - backspace to re-activate channel list - selected another FTA channel (RAI2) -> no show - exit xbmc The upnp server is "dvbviewver recording service 1.5.0.31". I tested it pon same platform using windows media player 11 as upnp client and all is working. Ask if further tests or information is needed. Thanks - Jönke - 2009-11-27 Same problem for me with XBMCLive 9.11 Beta1 ! XBMC 9.10 r24059 for windows works fine! - Jönke - 2009-12-01 Is the upnp client in XBMC working for someone with 9.11 Beta 1?? Or is it broken? - mario.rossi - 2009-12-12 added info and log in first post. thanks - Jönke - 2009-12-12 Same here, just testet with XBMCLive 9.11 Beta2 and still the same problem - mario.rossi - 2009-12-28 Tested again with 9.11 but again same problem. I'm available for testing pls contact me if you want specific information. Some information - mario.rossi - 2009-12-31 mario.rossi Wrote:Tested again with 9.11 but again same problem. I'm available for testing pls contact me if you want specific information. Some further information: in my tests (and in tests of other users that i know) xbmc 9.11 (all flavors alpha, beta and stable) runs well on first activation (first channnel) and then stops on channel change (all tests are done on FTA channels - RAI1 and RAI2 italian broadcasting). On debug log it seems a problem that occur starting render of the second channel - that is: Select first channel RAI1 -> get stream for RAI1 ->start render RAI1 -> ok Select secondo channel RAI2 -> stop render RAI1 -> get stream for RAI2 -> start render RAI2 -> ko (either video and audio) A "strange" thing is that, when you select the second channel (RAI2) xbmc show a popup "changing channel to RAI1" but this seems e minor bug about channel name (current one instead that the new one). Regards and Happy New Year. Some information (posted either on dvbviewer forum) - mario.rossi - 2009-12-31 (omissis) I can't understand where's the problem! I and a friend tested xbmc 9.11 with confluence in fresh install and followed exactly the actions you describe but on channel change (after 5 to 6 second just to change channel) xbmc stop render (you can view the exact sequence in my previous post). In the debug log (you can find the entire log here: http://pastebin.com/m4f42bfa2) on channel change you can find: Quote:23:49:35 T:3400 M:1327149056 NOTICE: Creating InputStream that seems to show a problem in stream format recognition. While on first open of a channel the log fragment is: Quote:23:49:19 T:912 M:1305169920 INFO: ffmpeg[390]: Input #0, mpegts, from 'http://192.168.10.50:7522/upnp/channelstream/00938.mpgts': that shows a correct stream format detection. (omissis) Again: what do you means with "As Lars has mentioned the upNp function is enabled with IP slot left blank at the port 8889": in recording service 1.5.0.31 IP slot can't be blank because it's a predefined list. I selected the IP address of my network card (not the skystar ip address to be clear ;-) ) (I'll post this either on xbmc forum hoping in a feedbak from developers :-) ) - Skindred - 2010-01-09 Tested with latest Boxee (boxee-0.9.20.1026.exe) Works just fine! With latest XBMC (xbmc-9.11.exe), it seems to not stop the previous stream when opening the new stream, or just plain incorrect reading of the .TS - Jönke - 2010-01-10 have u tried http://forum.xbmc.org/showpost.php?p=454073&postcount=13 , i dont know how to compile, hope someone soon can fix this - mario.rossi - 2010-01-10 Jönke Wrote:have u tried http://forum.xbmc.org/showpost.php?p=454073&postcount=13 , i dont know how to compile, hope someone soon can fix this I'm sorry but i'm not able to compile xbmc, i hope that developers get the correction and include it in a next svn. It's almost clear that this behaviour is a bug and rather documented Developers... please fix it Thanks. - desperz - 2010-01-11 +1 - Skindred - 2010-01-11 I too would really like to see this fixed! http://forum.xbmc.org/showpost.php?p=454073&postcount=13 Can anyone look into this and compile? - Jönke - 2010-04-03 Any news about this issue? |