2011-10-22, 16:30
Hi Guys
Any help would be appreciated.
I have installed ubuntu, compiled and installed my driver for TBS 6981 tuner, and now installed mythtv. (I plan to use xbmc as the frontend)
I have run the test as described in the readme of TBS setup instructions, and my result, I think was the correct one:
My only issue now is getting it to work in mythtv.
I have run the backend, and tried to add the card, but it does not display.
What am I doing wrong?
Any help would be much appreciated!!!!
Thanks
Any help would be appreciated.
I have installed ubuntu, compiled and installed my driver for TBS 6981 tuner, and now installed mythtv. (I plan to use xbmc as the frontend)
I have run the test as described in the readme of TBS setup instructions, and my result, I think was the correct one:
Code:
[ 7.152714] cx23885 driver version 0.0.3 loaded
[ 7.152740] cx23885 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.153204] CORE cx23885[0]: subsystem: 6981:8888, board: TurboSight TBS 6981 [card=33,autodetected]
[ 7.882646] cx25840 16-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
[ 8.847833] cx25840 16-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
[ 8.855204] cx23885_dvb_register() allocating 1 frontend(s)
[ 8.855208] cx23885[0]: cx23885 based dvb card
[ 8.858295] Modules linked in: tbs6981fe(P) snd_hda_codec_hdmi snd_hda_codec_via arc4 rt73usb crc_itu_t rt2x00usb rt2x00lib mac80211 ir_lirc_codec lirc_dev cfg80211 ir_mce_kbd_decoder snd_hda_intel snd_hda_codec psmouse serio_raw joydev ir_sony_decoder eeepc_wmi asus_wmi sparse_keymap ir_jvc_decoder ir_rc6_decoder snd_hwdep binfmt_misc ir_rc5_decoder snd_pcm cx25840 snd_seq_midi ir_nec_decoder snd_rawmidi snd_seq_midi_event cx23885(+) rc_core cx2341x videobuf_dma_sg videobuf_dvb dvb_core snd_seq videobuf_core v4l2_common videodev media snd_timer i915 drm_kms_helper drm i2c_algo_bit snd_seq_device video wmi snd btcx_risc tveeprom mei(C) soundcore snd_page_alloc lp parport usbhid hid xhci_hcd r8169
[ 8.859328] [<f8b12cb1>] dvb_register+0x1121/0x2160 [cx23885]
[ 8.859389] [<f8b10e92>] ? i2c_wait_done+0x22/0x60 [cx23885]
[ 8.859423] [<f8b11332>] ? i2c_sendbytes+0x172/0x3c0 [cx23885]
[ 8.859646] [<f8b13f77>] cx23885_dvb_register+0x107/0x140 [cx23885]
[ 8.859675] [<f8b1b6a9>] cx23885_initdev+0x8bc/0xc3a [cx23885]
[ 8.860050] [<f8a3f02e>] cx23885_init+0x2e/0x1000 [cx23885]My only issue now is getting it to work in mythtv.
I have run the backend, and tried to add the card, but it does not display.
What am I doing wrong?
Any help would be much appreciated!!!!
Thanks
