[jimbo229]

You can find all DC power supply here- Power Supplies Kits. They all 12V DC output but required different current for different PSU. The 102W PSU required 8.5A current. You need to pay close attention to the connection too.

Those were all sold out , I think what I ordered will work

[eskro]

example of 'SPECS FOR DC adapter'
http://forum.xbmc.org/showthread.php?tid...hidden+PSU

[jimbo229]

So the one I got is 72w, that means I am limiting myself to 72w even though i have a 120w PSU? (I am good with computers, but electricity confuses the hell out of me for some reason)

EDIT:

I could get something like this: http://www.e-itx.com/g-alantic-120w-ac-dc.html if that would work better than the 72w one I have

[bluray]

So the one I got is 72w, that means I am limiting myself to 72w even though i have a 120w PSU? (I am good with computers, but electricity confuses the hell out of me for some reason)

You'll not have enough current for your 120w PSU.

SoEDIT:

I could get something like this: http://www.e-itx.com/g-alantic-120w-ac-dc.html if that would work better than the 72w one I have

This one should work!

[eskro]

u need to check the connector size too...

example: Connecter size: 5.5mm / 2.5mm

which in the one u linked to, its good!

[jimbo229]

I ordered the adapter I linked, hopefully it all comes together well! I'll post pics when it's done

[eskro]

right on!

[jimbo229]

So it appears the MeOrb is sold out everywhere and from what I can find it looks like it is discontinued... Any other heat sink recommendations? What heat sinks are compatible with the FM1? AM3+?

[TeKo]

Scythe Shuriken Rev.B

http://www.newegg.com/Product/Product.as...6835185097

[jimbo229]

Scythe Shuriken Rev.B

http://www.newegg.com/Product/Product.as...6835185097

I looked at that one, it is 64mm tall though and my case is only 62mm tall. I saw this one too Scythe SCBSK-2000 but it is 58mm and it might be a little close still. The MeOrb was only 47mm haha

Hmm, missed the Scythe SCKZT-1000 somehow, looks like it should work without issue though

[eskro]

SCKZT-1000 will work but watch out for ram clearance...
make your going to be fine