[derdigge]

Hi everyone!

I am going crazy on this! there is no sond from xbmc.

What works:

Code:

root@Streamefiez:~# speaker-test -D plughw:0,7 -c 2

speaker-test 1.0.24.2

Playback device is plughw:0,7
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
Periods = 4
was set period_size = 4096
was set buffer_size = 16384
0 - Front Left
1 - Front Right

the speakers of tv are routhleing (nomal?)

The xbmc audio settings are follows:
Audio output : analog
Audio output : HDA Intel PCH - HDMI -7 (ALSA)

But there is no sound (faled to initialize audio device)

Any suggestions?

[derdigge]

added more information:

Code:

root@Streamefiez:/tmp# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC889 Analog [ALC889 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC889 Digital [ALC889 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Code:

derdigge@Streamefiez:~/.xbmc$ aplay -L
null
    Discard all samples (playback) or generate zero samples (capture)
default:CARD=PCH
    HDA Intel PCH, ALC889 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC889 Analog
    Front speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC889 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC889 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC889 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC889 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC889 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
    HDA Intel PCH, ALC889 Digital
    IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, HDMI 0
    HDMI Audio Output
hdmi:CARD=PCH,DEV=1
    HDA Intel PCH, HDMI 1
    HDMI Audio Output
dmix:CARD=PCH,DEV=0
    HDA Intel PCH, ALC889 Analog
    Direct sample mixing device
dmix:CARD=PCH,DEV=1
    HDA Intel PCH, ALC889 Digital
    Direct sample mixing device
dmix:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 0
    Direct sample mixing device
dmix:CARD=PCH,DEV=7
    HDA Intel PCH, HDMI 1
    Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
    HDA Intel PCH, ALC889 Analog
    Direct sample snooping device
dsnoop:CARD=PCH,DEV=1
    HDA Intel PCH, ALC889 Digital
    Direct sample snooping device
dsnoop:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 0
    Direct sample snooping device
dsnoop:CARD=PCH,DEV=7
    HDA Intel PCH, HDMI 1
    Direct sample snooping device
hw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC889 Analog
    Direct hardware device without any conversions
hw:CARD=PCH,DEV=1
    HDA Intel PCH, ALC889 Digital
    Direct hardware device without any conversions
hw:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 0
    Direct hardware device without any conversions
hw:CARD=PCH,DEV=7
    HDA Intel PCH, HDMI 1
    Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC889 Analog
    Hardware device with all software conversions
plughw:CARD=PCH,DEV=1
    HDA Intel PCH, ALC889 Digital
    Hardware device with all software conversions
plughw:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 0
    Hardware device with all software conversions
plughw:CARD=PCH,DEV=7
    HDA Intel PCH, HDMI 1
    Hardware device with all software conversions

[derdigge]

solved by creating following file:

cat /etc/asound.conf

pcm.!default {
type hw
card 0
device 7
}