[Imhotep]

Start to play movie from the network drive using AWXi webinterface and the output reduced to the quarter of the monitor. After I stoped video the screen left reduced. When I push ESC button it changes from bigger to lower part of the display but not fullscreen. Between changes fullscreen mode is blinking but than changing to the bigger one again. What could be the reason of such behaviour and how to change it back to fullscreen?

[Ned Scott]

Debug log (wiki) needed of when this happens. Also, does this happen when you are using the normal ATV remote?

[Imhotep]

I doesn't happen - it just happened once and I can't change it anymore
Here is the photo of how it looks like: https://lh4.googleusercontent.com/-GnAjo...AG0290.jpg

And the following is in the debug log when I press ESC button in the web interface:
20:24:39 T:106504192 NOTICE: Enabled debug logging due to GUI setting. Level 2.
20:24:39 T:106504192 DEBUG: ------ Window Init () ------
20:24:39 T:126369792 DEBUG: NEWADDON PythonCallbackHandler construction with PyThreadState 0x1134e1c0
20:24:41 T:138694656 DEBUG: Previous line repeats 2 times.
20:24:41 T:138694656 DEBUG: webserver: request received for /jsonrpc?awx
20:24:41 T:138694656 DEBUG: JSONRPC: Incoming request: {"jsonrpc": "2.0", "method": "Input.ExecuteAction", "params": { "action": "togglefullscreen" }, "id": 1}
20:24:41 T:138694656 DEBUG: JSONRPC: Calling input.executeaction
20:24:41 T:106504192 DEBUG: About to switch to 720 x 480 on screen 0
20:24:41 T:106504192 INFO: GLES: Maximum texture width: 2048
20:24:41 T:106504192 DEBUG: CRenderManager::UpdateDisplayLatency - Latency set to 0 msec
20:24:41 T:126369792 DEBUG: NEWADDON PythonCallbackHandler construction with PyThreadState 0x1134e1c0
20:24:41 T:138694656 DEBUG: webserver: request received for /jsonrpc?awx
20:24:41 T:138694656 DEBUG: JSONRPC: Incoming request: {"jsonrpc": "2.0", "method": "Input.ExecuteAction", "params": { "action": "togglefullscreen" }, "id": 1}
20:24:41 T:138694656 DEBUG: JSONRPC: Calling input.executeaction
20:24:41 T:106504192 DEBUG: About to switch to 1280 x 720 on screen 0
20:24:41 T:106504192 INFO: GLES: Maximum texture width: 2048
20:24:41 T:106504192 DEBUG: CRenderManager::UpdateDisplayLatency - Latency set to 0 msec
20:24:41 T:126369792 DEBUG: NEWADDON PythonCallbackHandler construction with PyThreadState 0x1134e1c0
20:24:42 T:138694656 DEBUG: webserver: request received for /jsonrpc?awx
20:24:42 T:138694656 DEBUG: JSONRPC: Incoming request: {"jsonrpc": "2.0", "method": "Input.Select", "id": 1}
20:24:42 T:138694656 DEBUG: JSONRPC: Calling input.select
20:24:42 T:126369792 DEBUG: NEWADDON PythonCallbackHandler construction with PyThreadState 0x1134e1c0
20:24:44 T:138694656 DEBUG: Previous line repeats 3 times.
20:24:44 T:138694656 DEBUG: webserver: request received for /jsonrpc?awx
20:24:44 T:138694656 DEBUG: JSONRPC: Incoming request: {"jsonrpc": "2.0", "method": "Input.Up", "id": 1}
20:24:44 T:138694656 DEBUG: JSONRPC: Calling input.up
20:24:44 T:126369792 DEBUG: NEWADDON PythonCallbackHandler construction with PyThreadState 0x1134e1c0
20:24:45 T:138694656 DEBUG: Previous line repeats 1 times.
20:24:45 T:138694656 DEBUG: webserver: request received for /jsonrpc?awx
20:24:45 T:138694656 DEBUG: JSONRPC: Incoming request: {"jsonrpc": "2.0", "method": "Input.Right", "id": 1}
20:24:45 T:138694656 DEBUG: JSONRPC: Calling input.right
20:24:45 T:126369792 DEBUG: NEWADDON PythonCallbackHandler construction with PyThreadState 0x1134e1c0
20:24:45 T:138694656 DEBUG: webserver: request received for /jsonrpc?awx
20:24:45 T:138694656 DEBUG: JSONRPC: Incoming request: {"jsonrpc": "2.0", "method": "Input.Up", "id": 1}
20:24:45 T:138694656 DEBUG: JSONRPC: Calling input.up
20:24:46 T:126369792 DEBUG: NEWADDON PythonCallbackHandler construction with PyThreadState 0x1134e1c0
20:24:46 T:138694656 DEBUG: webserver: request received for /jsonrpc?awx
20:24:46 T:138694656 DEBUG: JSONRPC: Incoming request: {"jsonrpc": "2.0", "method": "Input.Left", "id": 1}
20:24:46 T:138694656 DEBUG: JSONRPC: Calling input.left
20:24:46 T:138694656 DEBUG: webserver: request received for /jsonrpc?awx
20:24:46 T:138694656 DEBUG: JSONRPC: Incoming request: {"jsonrpc": "2.0", "method": "Input.Up", "id": 1}
20:24:46 T:138694656 DEBUG: JSONRPC: Calling input.up
20:24:46 T:126369792 DEBUG: NEWADDON PythonCallbackHandler construction with PyThreadState 0x1134e1c0
20:24:46 T:138694656 DEBUG: webserver: request received for /jsonrpc?awx
20:24:46 T:138694656 DEBUG: JSONRPC: Incoming request: {"jsonrpc": "2.0", "method": "Input.Right", "id": 1}
20:24:46 T:138694656 DEBUG: JSONRPC: Calling input.right
20:24:47 T:126369792 DEBUG: NEWADDON PythonCallbackHandler construction with PyThreadState 0x1134e1c0
20:24:47 T:138694656 DEBUG: webserver: request received for /jsonrpc?awx
20:24:47 T:138694656 DEBUG: JSONRPC: Incoming request: {"jsonrpc": "2.0", "method": "Input.Select", "id": 1}
20:24:47 T:138694656 DEBUG: JSONRPC: Calling input.select
20:24:47 T:106504192 NOTICE: Disabled debug logging due to GUI setting. Level 0.
20:24:47 T:106504192 NOTICE: Log level changed to 0

[Ned Scott]

It's switching between fullscreen and "windowed" mode. I don't know why it's not going back when you press escape again.

Try downloading Cyberduck (wiki) and make an SFTP connection to the ATV2 (username:mobile, password: alpine) and delete

/var/mobile/Library/Preferences/XBMC/userdata/guisettings.xml

then reboot the ATV2

and that will reset all the GUI settings.

[Imhotep]

Greate! It works!!! Thank you!

First I removed the file, but all my preferences removed as well, so I decide to find the difference between my guisettings.xml and the new one that was created. There were a lot of different attributes values, but what really helped is to remove (I replaced it by <resolution/> tag) following section:

Code:

<resolutions>
        <resolution>
            <description>Windowed</description>
            <subtitles>463</subtitles>
            <pixelratio>1.000000</pixelratio>
            <overscan>
                <left>0</left>
                <top>0</top>
                <right>720</right>
                <bottom>480</bottom>
            </overscan>
        </resolution>
        <resolution>
            <description>1280x720</description>
            <subtitles>463</subtitles>
            <pixelratio>1.000000</pixelratio>
            <overscan>
                <left>0</left>
                <top>0</top>
                <right>899</right>
                <bottom>495</bottom>
            </overscan>
        </resolution>
    </resolutions>