2013-04-10, 20:19
I'm trying to configure a hauppauge remote that came with an HVR2250, it's the 45button remote. I've been going according to a couple guides on here, plus i did a little extra digging, but there's a couple buttons that just won't work, or work right
this is my irremote.ini
buttons that aren't working, are TEXT, RECORDEDTV, GUIDE, LIVETV, MCEINFO, MCEJEWEL
buttons that I know so far aren't working right, are definitely CLEAR, and ENTER, these seem to act sporadically. I read in another thread that someone had similar issues and resolved it by moving the xbmc section of the irremote.ini file up before another section, i've gone so far as to strip any unused info from it, kept a backup of course, but i'm not sure what's going on here. hoped someone might be able to help?
i suspect some of their functionality may be hard coded somewhere else which may be causing my issues? I'm on Windows 7 btw if it matters at all
this is my irremote.ini
Code:
[Remote]
RepeatDelay=3
;Beep = 1 ; Sound for MessageBeep() to make for each Remote Keystroke
;PowerDownSound = 0 ; Sound for MessageBeep() to make when powering down
; map RC5 System Codes to button "name" lookup table
; Note: 0 (classic remote) conflicts with standard "philips" TV remotes
[SystemCode]
0=HCWClassic
28=HCWPVR2
29=HCWPVR2
30=HCWPVR2
31=HCWPVR
7=PCTV
; "IR Blaster" and 885/887 HW can support RC6; this is for the MS MCE remote table if desired
0x800f=MSMCE
; This supports using the MCE "Beanbag" remote with retail apps on non-MCE systems
0xffbc=MSMCERCV
0x2040=HCWPVR2
; these tables map actual IR scan codes to button "names" on a per system code basis
; Undefined values get the name "CODExx" by default (mostly for debugging)
; Real buttons on a remote should always get a real button name
; Note: some button "names" can only be generated by certain remotes
; Also, note that seemingly similar buttons may have unique names on different remotes
; This is to allow treating them differently based on the remote, and the
; "paradigm" of how they are used. For example; on old remotes there is a seperate TV
; button, but no GRNPOWER button. So, on old remotes we treat TV as on/off, where on PVR
; remote we use the GoMenu function (or RED as On), and the GRNPOWER as Off.
[MSMCE]
12=GRNPOWER
23=REC
25=STOP
24=PAUSE
22=PLAY
21=REWIND
20=FASTFWD
26=SKIPFWD
27=SKIPREV
13=MCEJEWEL
35=BACK
38=GUIDE
32=NAVLEFT
33=NAVRIGHT
30=NAVUP
31=NAVDOWN
34=OK
37=LIVETV
74=VIDEOS
71=MUSIC
73=PICTURES
80=RADIO
70=TVNEW
14=MUTE
;16=VOLUP
;17=VOLDOWN
18=CHNLUP
19=CHNLDOWN
36=DVDMENU
0=0
1=1
2=2
3=3
4=4
5=5
6=6
7=7
8=8
9=9
10=CLEAR
11=ENTER
78=PRINT
72=RECORDEDTV
28=MCEPOUND
29=MCESTAR
128=MCE128
129=MCE129
90=TEXT
91=RED
92=GREEN
93=YELLOW
94=BLUE
15=MCEINFO
; First item in this section IS always the default app if no others found
[Applications]
XBMC=
[XBMC]
GRNPOWER=s
0=0
1=1
2=2
3=3
4=4
5=5
6=6
7=7
8=8
9=9
STOP=x
PAUSE={space}
PLAY=p
REWIND=r
FASTFWD=f
SKIPFWD=.
SKIPREV=,
BACK={backspace}
MCEINFO=i
NAVUP={UP}
NAVDOWN={DOWN}
OK={enter}
NAVLEFT={left}
NAVRIGHT={right}
VOLUP=+
VOLDOWN=-
MUTE={F8}
CHNLUP={pgup}
CHNLDOWN={pgdn}
MCEJEWEL={esc}
RECORDEDTV=k
GUIDE=e
LIVETV=h
DVDMENU={ctrl}{shift}m
ENTER=m
CLEAR={tab}
TEXT=t
buttons that aren't working, are TEXT, RECORDEDTV, GUIDE, LIVETV, MCEINFO, MCEJEWEL
buttons that I know so far aren't working right, are definitely CLEAR, and ENTER, these seem to act sporadically. I read in another thread that someone had similar issues and resolved it by moving the xbmc section of the irremote.ini file up before another section, i've gone so far as to strip any unused info from it, kept a backup of course, but i'm not sure what's going on here. hoped someone might be able to help?
i suspect some of their functionality may be hard coded somewhere else which may be causing my issues? I'm on Windows 7 btw if it matters at all