Intel NUC - Bay Trail (Celeron 4th Generation CPU) - DN2820FYKH

  Thread Rating:
  • 5 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Post Reply
Haris1977 Offline
Junior Member
Posts: 29
Joined: Dec 2012
Reputation: 0
Post: #1936
(2015-04-27 14:44)pr0xZen Wrote:  
(2015-04-25 14:03)Haris1977 Wrote:  This is a "strange" issue i am having 5-6 days now..My setup:

Intel NUC Kit DN2820FYKH with Kingston KVR16LS11/4 (4 GB) Ram. In usb ports (back) i have attached:

1) Flirc controller (flirc.tv/)
2) TRANSCEND TS8GJF780 JETFLASH 780 8GB USB3.0 FLASH DRIVE BLACK (with OE 5.0.8 latest version).

I never had this problem but this "strange" one started when i ONLY did 2 things (and nothing else: havent touched my setup, havent removed anything):

1) Updated bios from 041 to 050
2) Updated Openelec from 5.0.7 to 5.0.8

Problem is that it wakes up on its own (usually the next day i have shut it down). So I got back to 041 bios (as the first idea that came to my mind was that the new bios was faulty). Problem persists with other bios too. Intel enginners answer was:

This looks like some kind of grounding or operating system related
issue, since the BIOS itself do not have a reason to turn on the system
on its own unless it is set on the BIOS to do so at a specific time, but
been a random issue, I do not think it is a BIOS issue.

The only thing remaining is OE version (5.0.8). Could it be my problem?? Anyone is experiencing the same behavior?Maybe bad bios?
Is it recieving an activaton signal from AVR or TV? Try disconnecting the HDMI cable at the NUC end after power off/sleep (whatever you use) and see if it happens. Not proposing this as a long-term solution, but it can be good to eliminate external factors early on in diagnosis.

Find the solutionWink
find quote
YaPaY Offline
Member
Posts: 85
Joined: Nov 2009
Reputation: 0
Post: #1937
windows 10 graphics driver is not stabile
find quote
amedia Offline
Junior Member
Posts: 28
Joined: Nov 2013
Reputation: 0
Post: #1938
I have had that where it has switched on by it self in 8.1. I have just switched it off at the plug after it shuts down. Yesterday I upgraded to window 10, and Kodi was showing my home IP address, instead of the VPN IP address, although on using KODI it, it must have been using the VPN IP.
(This post was last modified: 2015-08-14 10:31 by amedia.)
find quote
visiter555 Offline
Junior Member
Posts: 24
Joined: Nov 2013
Reputation: 0
Post: #1939
(2015-08-14 00:52)YaPaY Wrote:  windows 10 graphics driver is not stabile

Mine is rock solid after being up and running for more than a week.

What problems are you experiencing?
find quote
YaPaY Offline
Member
Posts: 85
Joined: Nov 2009
Reputation: 0
Post: #1940
(2015-08-14 20:26)visiter555 Wrote:  
(2015-08-14 00:52)YaPaY Wrote:  windows 10 graphics driver is not stabile

Mine is rock solid after being up and running for more than a week.

What problems are you experiencing?
Octoshape(flash) works properly if i select low quality. Otherwise stuttering. I have another desktop pc, i saw exact same problem. After graphics driver update I fixed the problem but on the nuc unfortunately problem is continuing.
find quote
Hetfiled Offline
Member
Posts: 94
Joined: Aug 2012
Reputation: 0
Location: Italy
Post: #1941
Hi all
I'm thinking to buy an Intel nuc.

I wouldn't have a problem with h265, pass-through dts hdma/ Dolby true hd.

Antec Fusion - A6 5400k / Ati HD7540 - Kodi Helix
Kuro 5090 - Onkyo nr809 - B&W 5.1 - Harmony One
find quote
Post Reply