[Frozin]

Hello

I've been messing with this for HOURS now and can't seem to get the correct asound.conf configuration to get my audio through my HDMI.

I've searched the net for help and used different settings and what not with no success. I hope someone here can help me out

Everything is unmuted and turned up.

Code:

**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC662 rev3 Analog [ALC662 rev3 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #

Code:

Discard all samples (playback) or generate zero samples (capture)
dmix0
default
sysdefault:CARD=PCH
    HDA Intel PCH, ALC662 rev3 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC662 rev3 Analog
    Front speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC662 rev3 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC662 rev3 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC662 rev3 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC662 rev3 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC662 rev3 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, HDMI 0
    HDMI Audio Output
dmix:CARD=PCH,DEV=0
    HDA Intel PCH, ALC662 rev3 Analog
    Direct sample mixing device
dmix:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 0
    Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
    HDA Intel PCH, ALC662 rev3 Analog
    Direct sample snooping device
dsnoop:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 0
    Direct sample snooping device
hw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC662 rev3 Analog
    Direct hardware device without any conversions
hw:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 0
    Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC662 rev3 Analog
    Hardware device with all software conversions
plughw:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 0
    Hardware device with all software conversions

[/quote]

[un1versal]

Glad to read there is NO audio issue.

But seriously, you dont need any asound.conf, its should just work, if it doesnt (remove any you created) show me a screenshot of alsamixer over ssh and a full pastebin of debug log (wiki)

[Frozin]

sorry, should of been more clear its while in desktop mode.

Update: I am able to get audio in desktop mode, however when using xbmc as a session and I use the netflixbmc along with chrome launcher, the first run has sound, any other launch after that, without a reboot there is no sound.... I can't figure out how sound can be okay first run, then second one nothing until I reboot again.

Everything on alsamixer is unmutted and volume is up.

[un1versal]

read what I posted carefully including the last part.

[wsnipex]

xbmcbuntu 13 creates an asound.conf in your homedir automatically(only if none exists already). For that to work, you must have configured Xbmc to use the correct audio device. So, if you have sound in xbmc, it should work on the desktop as well.

[AuXBoX]

Doesn't ubuntu desktop use pulseaudio. Check xbmc settings for audio output

[wsnipex]

Doesn't ubuntu desktop use pulseaudio. Check xbmc settings for audio output

Xbmcbuntu doesn't