2014-12-03, 19:19
I bought this CEC adapter from Pulse-Eight, but OpenELEC does not pick it up. So I'm wondering if I've installed it correctly, as there was no instructions included in the package I received from Pulse-Eight.
There are two connectors from the adapter (8 and 4 pins), and I only know where to connect the 8-pin HTPC Header connector by looking in the DH77DF manual. But where does the 4-pin connector go on this board? You can see the available connectors here: http://downloadmirror.intel.com/20950/en...uide02.pdf
This article, mentions:
"Control is supplied via USB, so besides the HTPC_HEADER which provides power and access to the CEC and REC_LED pins, a free internal header is required. I had no trouble finding one on the Intel DH77DF used for testing".
But what "internal header" is that? I tried the AA System Fan Header connector, but that gives me 4 beeps on boot and then it powers down.
Thank you very much!
There are two connectors from the adapter (8 and 4 pins), and I only know where to connect the 8-pin HTPC Header connector by looking in the DH77DF manual. But where does the 4-pin connector go on this board? You can see the available connectors here: http://downloadmirror.intel.com/20950/en...uide02.pdf
This article, mentions:
"Control is supplied via USB, so besides the HTPC_HEADER which provides power and access to the CEC and REC_LED pins, a free internal header is required. I had no trouble finding one on the Intel DH77DF used for testing".
But what "internal header" is that? I tried the AA System Fan Header connector, but that gives me 4 beeps on boot and then it powers down.
Thank you very much!
