2015-01-07, 16:20
First try, if: Fixed with 48000 works.
2015-01-11, 15:35
I tried it, (download sources and modify the files mention in the patch and compile kodi myself). But it looks like the problem is not solved, still same behaviour (fixed output -> sound, best match/optimized with or without paththrough -> no sound)
Do you have any idea how I can verify that the patch is implemented correctly, how can I debug or troubleshoot my problem futher?
Do you have any idea how I can verify that the patch is implemented correctly, how can I debug or troubleshoot my problem futher?
2015-01-11, 17:00
If sound works correctly with 48 khz, then you know that your AVR does not eat 44.1 khz.
Try that first: Go to settings and set your refreshrate to 30hz, disable Adjust Refreshrate to match video.
Does sound (including menu sounds) work now, also with Optimal setting?
Try that first: Go to settings and set your refreshrate to 30hz, disable Adjust Refreshrate to match video.
Does sound (including menu sounds) work now, also with Optimal setting?
2015-01-12, 23:36
For me it seems working. Here are my settings:
Video Output->
- Display Mode: Full screen
- Resolution: 1920x1080p
- Refreshrate: 30.00
- Blank other display: off
- Steroscopie: 3D mode same as movie
- vertical blank sync: enabled during video playback
Audio Output->
- Number of channels: 5.1
- Output configuration: Fixed
- Limit sampling rate: 96 kHz (I also test the thouthers without any problem - in fixed mode)
- Stereo upmix: on
- Resample quality: Medium
- keep audio device alive: 1Minute
- Play gui sound: only when playback stopped
Video settings -> playback:
- prefered audio language: Original stream's language
- Play the nex video automatically: off
- Adjust display refresh rate to match video: off
- Sync playback to display: off
- allow error in aspect ratio to minimise black bars: None
...
- Playback mode of stereoscopie 3D videos:on
- Disable strereoscopic 3D mode when palyback ended: on
Video Settings -> Acceleration
- Render method: Auto detect
- Enable HQ Scalers for scalings above: 0%
- Decode methode: Hardware accelerated
- Allow hardware acceleration (VDPAU): on
- Prefer VDPAU Video Mixer: on
In Fixed mode I did not find any combination from Refresh Rate and Limit sampling rate where the menu sound did not work.
With Audio Output Configuration: Optimal, and Video Refresh Rate 30.0 sound will also work, if I put it to >30 (like 50.0) I will losing the menu sound. So you are right with your theory, it seems to be the known AVR/intel bug...
Video Output->
- Display Mode: Full screen
- Resolution: 1920x1080p
- Refreshrate: 30.00
- Blank other display: off
- Steroscopie: 3D mode same as movie
- vertical blank sync: enabled during video playback
Audio Output->
- Number of channels: 5.1
- Output configuration: Fixed
- Limit sampling rate: 96 kHz (I also test the thouthers without any problem - in fixed mode)
- Stereo upmix: on
- Resample quality: Medium
- keep audio device alive: 1Minute
- Play gui sound: only when playback stopped
Video settings -> playback:
- prefered audio language: Original stream's language
- Play the nex video automatically: off
- Adjust display refresh rate to match video: off
- Sync playback to display: off
- allow error in aspect ratio to minimise black bars: None
...
- Playback mode of stereoscopie 3D videos:on
- Disable strereoscopic 3D mode when palyback ended: on
Video Settings -> Acceleration
- Render method: Auto detect
- Enable HQ Scalers for scalings above: 0%
- Decode methode: Hardware accelerated
- Allow hardware acceleration (VDPAU): on
- Prefer VDPAU Video Mixer: on
In Fixed mode I did not find any combination from Refresh Rate and Limit sampling rate where the menu sound did not work.
With Audio Output Configuration: Optimal, and Video Refresh Rate 30.0 sound will also work, if I put it to >30 (like 50.0) I will losing the menu sound. So you are right with your theory, it seems to be the known AVR/intel bug...
