2015-02-25, 12:51
Hi there.
I am new to the whole RPi World and I start to love this little fella.
But I have a problem with the Apple Remote A1156. System is running on openelec. Device is a RPi2
The IR receiver TSOP4383 is connected via GPIO (Pin 18) and I already did the irrecord process minimum 4 times with always the same result. The Back button ("Menu" on the remote) has no function in kodi.
Here is my lircd.conf located in .config
and here my Lircmap.xml, located in .kodi
pretty simple. Do i have to create more maps?! Does anyone have the same problem?
Thank you in advance.
Cheers
Oliver
I am new to the whole RPi World and I start to love this little fella.
But I have a problem with the Apple Remote A1156. System is running on openelec. Device is a RPi2
The IR receiver TSOP4383 is connected via GPIO (Pin 18) and I already did the irrecord process minimum 4 times with always the same result. The Back button ("Menu" on the remote) has no function in kodi.
Here is my lircd.conf located in .config
Code:
# Please make this file available to others
# by sending it to <[email protected]>
#
# this config file was automatically generated
# using lirc-0.9.1-git(default) on Tue Feb 24 23:24:31 2015
#
# contributed by
#
# brand: /storage/.config/lircd.conf
# model no. of remote control:
# devices being controlled by this remote:
#
begin remote
name /storage/.config/lircd.conf
bits 8
flags SPACE_ENC|CONST_LENGTH
eps 30
aeps 100
header 9118 4511
one 623 1671
zero 623 546
ptrail 622
repeat 9118 2221
pre_data_bits 16
pre_data 0x77E1
post_data_bits 8
post_data 0x9B
gap 108808
toggle_bit_mask 0x0
begin codes
KEY_BACK 0xC0
KEY_OK 0xA0
KEY_LEFT 0x90
KEY_UP 0x50
KEY_RIGHT 0x60
KEY_DOWN 0x30
end codes
end remote
and here my Lircmap.xml, located in .kodi
Code:
<lircmap>
<remote device="/storage/.config/lircd.conf">
<left>KEY_LEFT</left>
<right>KEY_RIGHT</right>
<select>KEY_OK</select>
<up>KEY_UP</up>
<down>KEY_DOWN</down>
<back>KEY_BACK</back>
</remote>
</lircmap>
pretty simple. Do i have to create more maps?! Does anyone have the same problem?
Thank you in advance.
Cheers
Oliver