[Zhigalo_Alexey]

Hello everybody!
Bought Raspberry Pi 3. Took to view IPTV
Put Openelec latest version.
And then there were problems. Many of the bands in the canals.


With that, when you turn on these channels are working properly, then leaf through the channels, and go back and strip again.

I Tried:
- OpenELEC Stable Releases (6.0.3)
- OpenELEC Beta Releases (7.0 beta 3)
- OpenELEC Legacy Releases (5.0.8)
- LibreELEC-RPi2.arm-7.90.006
- AlexELEC-RPi2-2.18-20160717
In the first two the same problem, the third does not start at all.
The fourth was not observed this but in the full screen picture is late.
a problem similar to the first C AlexELEC.

In general, it did not try, it's not that.
With that, on Windows Kodi all ok on Raspberry Pi 3 such problems.

Please tell me, the problem in hardware or in software. By the end of the order left a couple of days, so please help with this problem, and you do not want to throw money away.

And in general, whether the Raspberry Pi 3 for watching IPTV?
Or is it better to buy some some other device?
Thanks again!)

[popcornmix]

OpenELEC is very out of date. Please test with LibreELEC.

You say LibreELEC doesn't have this issue, but "the screen picture is late" can we focus on that?
First what do you mean? Is this an audio/video sync issue? Can you provide a debug log (wiki)?

[Zhigalo_Alexey]

OpenELEC is very out of date. Please test with LibreELEC.

You say LibreELEC doesn't have this issue, but "the screen picture is late" can we focus on that?
First what do you mean? Is this an audio/video sync issue? Can you provide a debug log (wiki)?

Although LibreELEC appeared the same problem, these bands again.
Esche Kodi restarts when switching channels itself Raspberry Pi 3 does not restart, a screen saver appears Kodi and loaded curtain.

How to attach a log file?

[popcornmix]

How to attach a log file?

Use a paste site (e.g. pastbin.org) and post the link here.

[Zhigalo_Alexey]

How to attach a log file?

Use a paste site (e.g. pastbin.org) and post the link here.

https://drive.google.com/open?id=0B3S44h...mtBcmFUVlk

[popcornmix]

Okay, seems to be an issue between switching between hardware and software codecs from the same stream.
The final file you were playing was MPEG-2 which has to be software decoded as you don't have the codec licence.

I suspect getting the MPEG-2 codec licence would resolve your problem:
http://swag.raspberrypi.org/products/mpeg-2-license-key

That would allow MPEG-2 to be hardware accelerated and probably avoid the issue.

However I'd like to get to the bottom of the crash. Let me see if I can reproduce - I may be back for more info if I can't.

[Zhigalo_Alexey]

Okay, seems to be an issue between switching between hardware and software codecs from the same stream.
The final file you were playing was MPEG-2 which has to be software decoded as you don't have the codec licence.

I suspect getting the MPEG-2 codec licence would resolve your problem:
http://swag.raspberrypi.org/products/mpeg-2-license-key

That would allow MPEG-2 to be hardware accelerated and probably avoid the issue.

However I'd like to get to the bottom of the crash. Let me see if I can reproduce - I may be back for more info if I can't.

How can I check it?

The problem is that when you first start I choose the channel, it shows well, put on the full screen, is also doing well.
But when I switch to the next channel, and then go back to the previous channel starts showing bad. Again the strip.

I doubt that the problem of the codec.

[redglory]

Could it be a problem with cache?!

[Zhigalo_Alexey]

Could it be a problem with cache?!

I do not know about the cache memory.
But the main memory - a 32Gb class 10

[Zhigalo_Alexey]

Could it be a problem with cache?!

I do not know about the cache memory.
But the main memory - a 32Gb class 10

Here is a video of my problem.