[Apple TV] XBMC/BoxeeLauncher 0.3.1 released
#31
MaestroDD Wrote:Hm, to debug that console.log is needed, too.
There has to be less than half a second break between pressing those buttons...

http://rafb.net/p/eGxtwi78.html

Hopefully this was the relevant area of the log- this would have been my 2nd attempt this morning trying to update from the XBMC launcher menu after installing it from the .run file last night.

ike
Reply
#32
evil.ike Wrote:http://rafb.net/p/eGxtwi78.html

Hopefully this was the relevant area of the log- this would have been my 2nd attempt this morning trying to update from the XBMC launcher menu after installing it from the .run file last night.

ike

yep, perfect, that's it. Thanks!
wget is missing. I think it's installed by atv-usb-creator if binutils is activated. I'll try to fix that now

Always read the XBMC online-manual, FAQ and search the forum before posting.
Do not e-mail XBMC-Team members directly asking for support. Read/follow the forum rules. If you don't have the time to read them, please don't take the time to post in this forum!
For troubleshooting and bug reporting please make sure you read this first.
Reply
#33
I was able to do a factory restore to 1.0 by menu down while booting. I then updated to 2.2, then patchsticked. Then did the launcher update. That had to be done twice if I recall, in order for the 3.1 to show up. Then Beta2, now it is working so far anyway.
Reply
#34
After putting the Keymap.xml gile into the userdata dir my custom Keymap mostly worked!

Hold Left and Hold Right do not seem to work though as key commands, anyone else get these working?
Reply
#35
MaestroDD Wrote:yzeyze, would you mind uploading your original Keymap.xml to pastebin or something? There must be an error in Launchers update script that prevented an update of Keymap.xml. Launcher update checks if there is already an "AppleRemote" entry in you Keymap.xml and does not touch it, if it's there.

Thanks!

http://pastebin.com/m6f898ea7 Is the one I was using.
I have a new one that I will put up shortly that is working and expands a bit on your good work.
Although I cannot seem to get press and hold of the directional keys to do anything, they just key repeat the press function.
Reply
#36
There's now an update entry in XBMC/BoxeeLauncher to download a new Keymap.xml file. If one still does not have remote control in XBMC, please try that update and see if it works.

Always read the XBMC online-manual, FAQ and search the forum before posting.
Do not e-mail XBMC-Team members directly asking for support. Read/follow the forum rules. If you don't have the time to read them, please don't take the time to post in this forum!
For troubleshooting and bug reporting please make sure you read this first.
Reply
#37
yzeyze Wrote:http://pastebin.com/m6f898ea7 Is the one I was using.

Thanks, but probably you suffered from the same bug as the others. Do you have wget on you ATV? It's installed by default from atvusb-creator.

yzeyze Wrote:I have a new one that I will put up shortly that is working and expands a bit on your good work.
d4rk created the Keymap.xml. But he's pretty sure open for improvements.

yzeyze Wrote:Although I cannot seem to get press and hold of the directional keys to do anything, they just key repeat the press function.

directional press and hold events are only present on atv <= 2.1, sorry
But probably one could simulate them ...

Always read the XBMC online-manual, FAQ and search the forum before posting.
Do not e-mail XBMC-Team members directly asking for support. Read/follow the forum rules. If you don't have the time to read them, please don't take the time to post in this forum!
For troubleshooting and bug reporting please make sure you read this first.
Reply
#38
This is a replacement Keymap.xml file that builds on the new keymap features from this Launcher http://www.savefile.com/files/1846333.

Replace existing Keymap.xml file (delete the old one first)

Just listing the non-obvious features.
Some of the things listed were already in the provided keymap file,
I just expanded a little on it, but listing all here for simplicity.

Main Screen
-----------
Press and Hold (P&H) Menu - goes to "Now Playing"
Menu - Full screen visualization (when playing music)
P&H Play - Brings up player controls (when playing music)

File Lists
----------
P&H Menu - Context Menu
P&H Play - Brings up player controls (when playing music)
Menu - Step back one folder

Full Screen Video
-----------------
+ - Jump forward 10 mins
- - Jump back 10 mins
< - back 30 seconds
> - forward 30 seconds
Menu - brings up OSD player controls
P&H Menu - brings up playing file info
Play - Pause / Play
P&H Play - Stop

Slideshow
---------
+ - Zoom in
- - Zoom out
< - Previous picture
> - Next picture
Play - pause / continue slideshow
Menu - Stop slideshow
P&H Menu - Rotate picture

Also paste bin link http://pastebin.com/f21c005ef
Reply
#39
MaestroDD Wrote:Thanks, but probably you suffered from the same bug as the others. Do you have wget on you ATV? It's installed by default from atvusb-creator.
...
Probably no wget, I went a long and tedious route to get XBMC onto my ATV as I only have Windows, it involved an ATV patch (non XBMC, but one that can be made through Wiindows) and lots of manual installings, so wget probably didn't get there.
Reply
#40
yzeyze Wrote:Probably no wget, I went a long and tedious route to get XBMC onto my ATV as I only have Windows, it involved an ATV patch (non XBMC, but one that can be made through Wiindows) and lots of manual installings, so wget probably didn't get there.

http://wiki.awkwardtv.org/wiki/Apple_TV_Binaries

ssh in to your /bin diretory.
Reply
#41
dafranca Wrote:http://wiki.awkwardtv.org/wiki/Apple_TV_Binaries

ssh in to your /bin diretory.
Thanks, now I have wget (and a few other utilities).
Reply
#42
After I installed Boxee I had the same problem as Gringott. That was the remote stopped working (although I heard clicks) and even after rebooting the remote doesn't work at all and then no clicks worked and the LED on the ATV was orange.

To fix I used ssh and removed both Boxee and XBMC from /Applications, and I deleted the XBMC folder from Application Data. Then rebooted and the remote was working again phew.
Reply

Logout Mark Read Team Forum Stats Members Help
[Apple TV] XBMC/BoxeeLauncher 0.3.1 released0