2010-04-03, 01:41
Hi.
I've read and tried several "fixes" for getting HD (720/1080p) to run without that annoying "jitter" every 3-5 seconds. Especially noticable on "panning scenes".
There are no dropped frames it's just a "jitter".
My Asrock is connected directly into the BENQ W5000 projector and the BENQ W5000 is displaying the asrock as 1080/60p and i find no setting on the projector or the Asrock bios to change that. Could that be the problem?
I've added the DynamicTwinView False to xorg and rebooted. When that was done i could choose 24hz in XBMC, but still same problem.
I've also set the X11 refresh to 24hz, but still no luck.
So what I'm left with is to try hooking the Asrock into a reciever and from the receiver into the BENQ W5000.. Will this fix my problem? And is that the only fix available?
Here is a sample of my xorg.conf file:
Thanks in advance.
I've read and tried several "fixes" for getting HD (720/1080p) to run without that annoying "jitter" every 3-5 seconds. Especially noticable on "panning scenes".
There are no dropped frames it's just a "jitter".
My Asrock is connected directly into the BENQ W5000 projector and the BENQ W5000 is displaying the asrock as 1080/60p and i find no setting on the projector or the Asrock bios to change that. Could that be the problem?
I've added the DynamicTwinView False to xorg and rebooted. When that was done i could choose 24hz in XBMC, but still same problem.
I've also set the X11 refresh to 24hz, but still no luck.
So what I'm left with is to try hooking the Asrock into a reciever and from the receiver into the BENQ W5000.. Will this fix my problem? And is that the only fix available?
Here is a sample of my xorg.conf file:
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 14.0 - 72.0
VertRefresh 24.0 - 62.0
Option "DPMS"
Modeline "[email protected]" 74.230 1920 2560 2604 2752 1080 1084 1089 1125 +hsync +vsync
Modeline "1920x1080@50p" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
Modeline "[email protected]" 74.176 1920 1960 2016 2200 1080 1082 1088 1125 +hsync +vsync Interlace
Modeline "[email protected]" 148.352 1920 1960 2016 2200 1080 1082 1088 1125 +hsync +vsync
Modeline "1920x1080@60i" 74.25 1920 1960 2016 2200 1080 1082 1088 1125 +hsync +vsync Interlace
Modeline "1920x1080@60p" 148.500 1920 2008 2056 2200 1080 1084 1089 1125 +hsync +vsync
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
Option "DynamicTwinView" "False"
EndSection
Thanks in advance.