Posts: 65
Joined: Oct 2009
Reputation:
2
I have had it running on various version. With Dharma, it just displays gibberish on the screen. With 9.11 it runs fine. Any suggestions?
Posts: 376
Joined: Mar 2008
Reputation:
0
have you got a file /usr/lib/lcdproc/irtrans.so ?
if so, there is lcdproc support, you just need to set it as currently used driver in LCDd.conf, putting driver=irtrans where you see driver=curses, that's all
Posts: 32
Joined: Jan 2010
Reputation:
0
2014-11-26, 05:19
(This post was last modified: 2014-11-26, 05:20 by ibjeepin.)
Sorry for crosspost I realized this may be in a better thread.
I am having a problem getting my Ahanix MDE303 IR working. Followed all the steps and here is what I get when I test.
xbmc@xbmc-ahanix:/etc/rc2.d$ sudo /usr/local/irtrans/irserver -loglevel 4 -codedump /dev/ttyUSB0
[sudo] password for xbmc:
Init Server Socket done
IRServer64 Version 6.09.04
Init Events done
Opening Device: /dev/ttyUSB0
IRTRans Send Done: 1
Name :
Version: D5.11.07
FW SNo : 0
Capab : Power On;
FW Cap : 0x3c8019
FW Cap2: 0x9
USB SNo:
Node : /dev/ttyUSB0
Init communication ...
[ 0]: D5.11.07
Chdir to DB OK
Read routing OK
Read Switches OK
Open DIR: 13
Get Dirent: 480
Remote pace compiled: 2 Timings - 38 Commands
Remote irtrans compiled: 1 Timings - 33 Commands
Remote mce-keyboard compiled: 1 Timings - 77 Commands
Remote mediacenter compiled: 1 Timings - 49 Commands
Remote mce-mouse compiled: 1 Timings - 1 Commands
Remote kathrein-ufs compiled: 2 Timings - 36 Commands
Remote sky-digital compiled: 1 Timings - 31 Commands
Remote sky-hd compiled: 1 Timings - 34 Commands
Remote dream compiled: 0 Timings - 36 Commands
Remote dbox2 compiled: 1 Timings - 26 Commands
Get Dirent: 0
Duplicate Commands for pace.0: pace.0-
Total: 10 Remotes - 11 Timings - 361 Commands - 0 Calib. Commands
0 Togglec. - 0 CCF Data - 0 CCF RAW - 0 CCF Error
IRTRans Send Done: 1
IRTRans Send Done: 1
Select Return: 1
Select Return: 1
Select Return: 1
Select Return: 1
Select Return: 1
Select Return: 1
Select Return: 1
Select Return: 1
Select Return: 1
Select Return: 1
Select Return: 0
Select Return: 1
Select Return: 0
Select Return: 1
Select Return: 0
Select Return: 1
Everytime I press the button the Select Return: 1 return happens. nothing else. Anyone have any ideas?
Thanks