Hey,
Just purchased my first harmony remote I love this thing!
I'm looking for some help...in the past I've been using WOL to get my XBMC up and running from shutdown I have done a bit of reading and realize the zotacs have a Wake on USB feature.
I am looking to take advantage of this feature if possible to boot up my XBMC with my harmony remote while it's fully shutdown.
My current setup:
Media Center: ZBOX-ID41
XBMC: XBMCBUNTU v. Frodo
IR Receiver: FLIRC
Remote: Harmony Ultimate One with Profile Flirc XBMC
I was wondering if this was possible?
Thanks
Code:
root@xbmc:/home/xbmc# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 20a0:0001 Clay Logic
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 006 Device 002: ID 2109:0811
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@xbmc:/home/xbmc# dmesg |grep flirc
[ 2.444130] usb 3-1: Product: flirc
[ 2.444135] usb 3-1: Manufacturer: flirc.tv
[ 2.508335] input: flirc.tv flirc as /devices/pci0000:00/0000:00:1d.1/usb3/3- 1/3-1:1.0/input/input4
[ 2.508743] hid-generic 0003:20A0:0001.0001: input,hidraw0: USB HID v1.01 Key board [flirc.tv flirc] on usb-0000:00:1d.1-1/input0
[ 4949.039225] usb 5-2: Product: flirc
[ 4949.039232] usb 5-2: Manufacturer: flirc.tv
[ 4949.077487] input: flirc.tv flirc as /devices/pci0000:00/0000:00:1d.3/usb5/5- 2/5-2:1.0/input/input18
[ 4949.077825] hid-generic 0003:20A0:0001.0002: input,hidraw0: USB HID v1.01 Key board [flirc.tv flirc] on usb-0000:00:1d.3-2/input0
[ 5695.285163] usb 3-1: Product: flirc
[ 5695.285171] usb 3-1: Manufacturer: flirc.tv
[ 5695.320443] input: flirc.tv flirc as /devices/pci0000:00/0000:00:1d.1/usb3/3- 1/3-1:1.0/input/input22
[ 5695.321171] hid-generic 0003:20A0:0001.0003: input,hidraw0: USB HID v1.01 Key board [flirc.tv flirc] on usb-0000:00:1d.1-1/input0
root@xbmc:/home/xbmc# cat /sys/bus/usb/devices/usb3/power/wakeup
enabled
I am running XBMCBuntu trying to get my zotac ID41 to wake on suspend.
I believe my Flirc IR is plugged into USB3 which I have enabled.
Once the device is in suspended mode xbmc will not wake.
You might want to check out forum.flirc.tv