On Libreelec 8.1 RC (Kodi 17.4) i am able to watch a bluray movie (without menu). Using the testbuild it breaks after 20 - 30 seconds.
Gesendet von meinem D5803 mit Tapatalk
(2017-08-28, 20:59)SpokV Wrote: [ -> ]Hi. It seems that hdhomerun pve addon has a huge memory leakage.
Showing system info memory usage has rapid memory allocation.
Disabling the addon solves this issue.
I'm not able to figure out yet. But memory usage is increasing on boot. Using system.info...
New LibreELEC.tv Leia build #0828:
RPi /
RPi2
(Supercedes previous build)
Code:
# uname -a
Linux rpi512 4.12.9 #1 Mon Aug 28 21:21:31 BST 2017 armv6l GNU/Linux
# vcgencmd version
Aug 22 2017 14:20:40
Copyright (c) 2012 Broadcom
version eb51b8b84ec11d98562dfbb7be53cdd216c0ea4c (clean) (release)
# lsb_release
LibreELEC (Milhouse): devel-20170828212024-#0828-gc6213ec [Build #0828]
# Kodi version
(18.0-ALPHA1 Git:38b74fb). Platform: Linux ARM 32-bit
Based on tip of
LibreELEC.tv master (c6213ec,
changelog) and tip of
XBMC master (38b74fb,
changelog) with the following modifications:
- Includes newclock5 patches
- Excludes the LibreELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-4.12.y
- Includes latest bcm2835-driver master (7f7df25)
- Includes latest kodi-platform master (36fb493)
- Includes latest libcec master (8adc786, ahead +26)
- Includes latest libnfs master (df94ae9, ahead +56)
- Includes latest p8-platform master (a822e19)
- Includes latest addons: inputstream.adaptive (90bbbd1, +61), inputstream.rtmp (e094fa3, +1), peripheral.joystick (cc14287, +3), pvr.argustv (23cc0e8, +1), pvr.demo (122dedd, +3), pvr.dvblink (816f90c, +6), pvr.dvbviewer (8741c8b, +10), pvr.filmon (34dca04, +1), pvr.hdhomerun (ace19fa, +17), pvr.hts (53118d8, +3), pvr.iptvsimple (ac4f4bd, +7), pvr.mediaportal.tvserver (d822f63, +7), pvr.mythtv (b46e5be, +2), pvr.nextpvr (a855663, +1), pvr.njoy (99874de, +1), pvr.octonet (a77cf11), pvr.pctv (549f690, +1), pvr.stalker (e15edca, +2), pvr.vbox (b5da811, +1), pvr.vdr.vnsi (7e6e385, +2), pvr.vuplus (9bfd868, +7), pvr.wmc (d820bf8, +1)
- Include [env] compare: kodi: updates for September
- Include [env] compare: LibreELEC-settings: add support for workgroup, server min/max proto settings
- Include [env] patch: libcec: don't link non-existant libtinfo
- Include [env] patch: rev hack for kodi
- Include [env] patch: tvheadend42: fixup ffmpeg patch
- Include [env] patch: tvheadend42: add bzip dependency when transcoding
- Include [env] patch: inputstream.adaptive: don't build it twice...
- Include [env] patch: Add experimental splash video for RPi
- Include [env] patch: Bump included addon versions to prevent online updates
- Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
- Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, other)
- Include [env] patch: pvr addons: disable broken addons
- Include [env] PR:1773: init: make break after behaviour really break after
- Include [env] PR:1776: Don't cause system to hang on halt/reboot when net-booting
- Include [env] PR:1791: nss/nspr: include in main image [rfc]
- Include [env] PR:1835: add support for optional kernel modules in image and from addons
- Include [env] PR:1917: linux: enable ftrace
- Include [env] PR:1918: Package Updates: intel-vaapi-driver, libva and libva-utils to 1.8.3
- Include [env] PR:1919: samba: don't restart smbd in samba-autoshare
- Include [env] PR:1922: brcmfmac_sdio-firmware-rpi: Consolidate firmware files
- Include [env] PR:1923: mesa: update to 17.2.0-rc5
- Include [env] PR:1926: Package Updates: dbus 1.11.16, connman 1.35
- Include [pkg] patch: skin.estuary: reduce system info font size (kodi)
- Include [pkg] patch: samba: add workgroup, server min and server max protocol settings
- Include [pkg] PR:76: service: fix icon path (service.libreelec.settings)
- Include [pkg] PR:12311: FIX: ensure real filename from videodb in playlists
- Include [pkg] PR:12710: [DemuxClient] transport flags
Build Highlights:
- Update dbus-1.11.16, connman-1.35
- Kodi EPG fixes
Build Details:
- XBMC:
- [PVR] Refactor and cleanup addon epg callback handling. (PR:12711, 1 commit, 4 files changed)
- [PVR] Coverity: Fix CID174857 (WRAPPER_ESCAPE). (PR:12724, 1 commit, 2 files changed)
- [PVR] epg grid container and model: cleanup and refactoring. (PR:12730, 1 commit, 4 files changed)
- [PVR] Fix CAddonEpgTag ctor (c/p error in previous commit). (PR:12733, 1 commit, 1 file changed)
- [Win] WinRenderer::NeedBuffer: use loaded state instead HasPic() (PR:12734, 1 commit, 1 file changed)
- inputstream.adaptive:
- [DASH] Allow ContentProtection withoud keysystems also on adaptationsets (90bbbd1)
- Additional commits/pull requests/changes not yet merged upstream:
- Added: [env] PR:1926: Package Updates: dbus 1.11.16, connman 1.35
Hi Milhouse,
Since 0827 ssh switches off everytime i reboot, i have to go into libreelec setting each reboot to reenable it.
Also the switch to enable ssh is missing until you click on where it would be, then it appears.
Regards
Bucky
(2017-08-28, 22:57)bmonster Wrote: [ -> ]Hi Milhouse,
Since 0827 ssh switches off everytime i reboot, i have to go into libreelec setting each reboot to reenable it.
Also the switch to enable ssh is missing until you click on where it would be, then it appears.
Regards
Bucky
OK I'll look into it, thanks
(2017-08-28, 22:58)Milhouse Wrote: [ -> ] (2017-08-28, 22:57)bmonster Wrote: [ -> ]Hi Milhouse,
Since 0827 ssh switches off everytime i reboot, i have to go into libreelec setting each reboot to reenable it.
Also the switch to enable ssh is missing until you click on where it would be, then it appears.
Regards
Bucky
OK I'll look into it, thanks
Deleting the settings file fixed it for me.
(2017-08-28, 18:55)origpumu Wrote: [ -> ]Hi,
Don't know, if this is the right place for featurerequests. If not, please give me a hint.
I miss a function in update mechanism of libreelec: I have to restart my raspberry to update available versions from updatechannel. My pi is 24/7 on and there is never a newer version in the list before the pi is rebooted.
Thx for Your time.
Peter.
Gesendet von meinem E6653 mit Tapatalk
Hi Peter,
You do not have to reboot raspberry Pi, you just click on "Custom Channel 1" (
h**p://milhouse.libreelec.tv/builds/master/RPI2 ) and confirm with OK. If you now press "Available Versions" the new version is available.
@
bmonster could you post a screenshot of what you are seeing in the settings when the "enable ssh" doesn't appear (before you click on it to make it appear)?
(2017-08-28, 23:19)Milhouse Wrote: [ -> ]@bmonster could you post a screenshot of what you are seeing in the settings when the "enable ssh" doesn't appear (before you click on it to make it appear)?
Deleting the oe_settings fixed it, and now i cant get it back to the state when it was broken.
(2017-08-28, 23:33)bmonster Wrote: [ -> ] (2017-08-28, 23:19)Milhouse Wrote: [ -> ]@bmonster could you post a screenshot of what you are seeing in the settings when the "enable ssh" doesn't appear (before you click on it to make it appear)?
Deleting the settings fixed it, and now i cant get it back to the state when it was broken.
I haven't been able to reproduce (and not sure why it would be happening), however I've made some changes that will be in the next build - if it continues with #0829 please let me know. Thanks.
@
bmonster I think I've reproduced it, and the changes I've made should fix it (there were missing default members for the new workgroup, min and max settings which when accessed while loading the Samba settings would trigger an unhandled exception that resulted in the SSH settings failing to load - you should have had some errors in your kodi.log). Thanks for the heads up.
(2017-08-28, 23:50)Milhouse Wrote: [ -> ]@bmonster I think I've reproduced it, and the changes I've made should fix it (there were missing default members for the new workgroup, min and max settings which when accessed while loading the Samba settings would trigger an unhandled exception that resulted in the SSH settings failing to load - you should have had some errors in your kodi.log). Thanks for the heads up.
I got also FTP and SSH connection refused by libreelec recent test builds.
(2017-08-28, 23:13)Aux_ Wrote: [ -> ] (2017-08-28, 18:55)origpumu Wrote: [ -> ]Hi,
Don't know, if this is the right place for featurerequests. If not, please give me a hint.
I miss a function in update mechanism of libreelec: I have to restart my raspberry to update available versions from updatechannel. My pi is 24/7 on and there is never a newer version in the list before the pi is rebooted.
Thx for Your time.
Peter.
Gesendet von meinem E6653 mit Tapatalk
Hi Peter,
You do not have to reboot raspberry Pi, you just click on "Custom Channel 1" ( h**p://milhouse.libreelec.tv/builds/master/RPI2 ) and confirm with OK. If you now press "Available Versions" the new version is available.
It works. Thank You.
Gesendet von meinem E6653 mit Tapatalk
(2017-08-29, 06:57)parcel Wrote: [ -> ] (2017-08-28, 23:50)Milhouse Wrote: [ -> ]@bmonster I think I've reproduced it, and the changes I've made should fix it (there were missing default members for the new workgroup, min and max settings which when accessed while loading the Samba settings would trigger an unhandled exception that resulted in the SSH settings failing to load - you should have had some errors in your kodi.log). Thanks for the heads up.
I got also FTP and SSH connection refused by libreelec recent test builds.
I can confirm neither sftp nor ssh works.
Yes, ssh/ftp will be fixed tonight
Edit: when ssh/ftp isn't working there should have be an error in the kodi.log, would be helpful if someone posted a log to confirm.