Kodi Community Forum

Is it possible to set up docker with this build? When I install the addon one of the dependencies "os.libreelec.tv" is unavailable.

Im using the latest nightly.

(2017-11-01, 11:23)dan_jericho Wrote: [ -> ]Is it possible to set up docker with this build?  When I install the addon one of the dependencies "os.libreelec.tv" is unavailable.

Im using the latest nightly.

Are you actually unable to install Docker? I know Kodi claims the dependency is missing, but it's really not... os.libreelec.tv is a built-in addon (which is probably what confuses Kodi).

(2017-11-01, 07:45)YinYang Wrote: [ -> ]Hello everybody

I have an important question ....
I own a Zotac ZBOX CI547 nano and running on it liebreelec 9 of Milhouse.
Unfortunately, I have seen that there are problems with the drivers in Linux, which makes the passthrough of HD audio via HDMI impossible.
But I have read that there is now a solution is that correct?
do I have to make or have a bios update for it?

Unfortunately, Zotac has not released any bios update although the box is based on a nuc.

My Hardware ZBOX CI547 NANO https://www.zotac.com/us/product/mini_pcs/ci547-nano

I would be very grateful and happy about an education and apology for my bad english i use a translator.

lg
YY

The latest test builds in this thread include the HBR (high Bit Rate) audio patches to allow HD Audio via HDMI on Apollo/Kaby/etc Lake devices.

However you may need to upgrade the LSPCON firmware to v1.66, which can only be done using Windows:

http://nucblog.net/2017/03/intel-release...kaby-lake/

If you have further issues I would suggest you post in the Kaby Lake Support thread.

(2017-11-01, 20:53)Milhouse Wrote: [ -> ]

(2017-11-01, 11:23)dan_jericho Wrote: [ -> ]Is it possible to set up docker with this build?  When I install the addon one of the dependencies "os.libreelec.tv" is unavailable.

Im using the latest nightly.

Are you actually unable to install Docker? I know Kodi claims the dependency is missing, but it's really not... os.libreelec.tv is a built-in addon (which is probably what confuses Kodi).

Yes, it installs. Tho when I try to run a container I get the following error:
This is when trying to run a Portainer container.

@dan_jericho Right, the os.libreelec.tv dependency issue is just cosmetic.

Do you get this error with LibreELEC 8.2.0? If you do, then I think you should continue this discussion in the LibreELEC forum as it's most likely a general Docker issue. I'm not a Docker expert but I don't think there should be anything in these builds which would break Docker.

(2017-10-27, 00:00)Milhouse Wrote: [ -> ]While discussing the transparency issue on github I did mention that the GUI now appeared a little darker (but it had subsequently completely slipped my mind...). On github, compare the screenshot from #1004 with #1005 and the latter is clearly darker.

So yes, since the switch from a fixed function pipeline in #1005 the GUI has been a little darker. I'm not sure if it's meant to be like this (I've obviously become used to it!) or if it's an error - this will require a trac ticket for the developer (@fernetmenta) to investigate further.

Its too dark. This cannot meant to be.

New LibreELEC.tv Leia build #1101: Generic
(Supercedes previous build)

SHA256 Checksum: 3167f6ed5f3b5af145a333c724679b8c2e57f1f856bbf51d3e492f162b81bffa (Generic)


Based on tip of LibreELEC.tv master (a3434fe, changelog) and tip of XBMC master (150591e, changelog) with the following modifications:

• Includes latest kodi-platform master (36fb493)
  
• Includes latest libcec master (8adc786, ahead +26)
  
• Includes latest libnfs master (7c68a3d, ahead +106)
  
• Includes latest p8-platform master (a822e19)
  
• Includes latest addons: inputstream.adaptive (853144d), inputstream.rtmp (0702f7e), peripheral.joystick (a5cc154), pvr.argustv (23cc0e8), pvr.demo (122dedd), pvr.dvblink (816f90c), pvr.dvbviewer (afe584a), pvr.filmon (f67f905), pvr.hdhomerun (ddfe2cb), pvr.hts (295893c), pvr.iptvsimple (ac4f4bd), pvr.mediaportal.tvserver (fa1069d), pvr.mythtv (d5a6aa3), pvr.nextpvr (5b7caa2), pvr.njoy (cc1cb56), pvr.octonet (e9b4c05), pvr.pctv (c6d10cb), pvr.stalker (5f53d18), pvr.teleboy (2d092c4), pvr.vbox (56052da), pvr.vdr.vnsi (92e4c64), pvr.vuplus (eb0d16d), pvr.wmc (02edba6), pvr.zattoo (70fafbe)
  
• Include [env] compare: connman: timeserver: Retry NTP servers periodically on startup
  
• Include [env] compare: dmidecode: initial package
  
• Include [env] patch: RPi/RPi2: enable Broadcom WiFi debugging (see details)
  
• Include [env] patch: libcec: don't link non-existant libtinfo
  
• Include [env] patch: rev hack for kodi
  
• Include [env] patch: media_build: disable due to conflicts
  
• Include [env] patch: Add experimental splash video for RPi
  
• Include [env] patch: Bump included addon versions to prevent online updates
  
• Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
  
• Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, other)
  
• Include [env] patch: pvr addons: disable broken addons
  
• Include [env] PR:2002: linux: include HBR and ELD fixes for Intel
  
• Include [env] PR:2092: kodi: batched updates
  
• Include [env] PR:2118: linux: update to linux-4.13.10
  
• Include [env] PR:2138: removed OE mirror links
  
• Include [env] PR:2144: Tvheadend 4.2 rework to use ffmpegx
  
• Include [env] PR:2161: Remove unneeded glu et al
  
• Include [pkg] patch: skin.estuary: reduce system info font size (kodi)
  
• Include [pkg] PR:12991: VideoPlayer: fix #12986, was messed up by revert and re-submit
  

Build Highlights:

1. Fix JSON-RCP version
   
2. Fix crash when ending playback
   
3. Fix seek artefacts/green screen since ffmpeg-3.4
   

Build Details:

1. LibreELEC.tv:
   • Fix parsing settings.xml file (PR:2168, 2 commits, 2 files changed)
     
   • nss/nspr: include in main image [rfc] (PR:1791, 5 commits, 6 files changed)
     
2. XBMC:
   • VideoPlayer: add OnAVChange callback (PR:12964, 1 commit, 4 files changed)
     
   • VideoPlayer: lambda jobs must copy parameters (PR:12985, 1 commit, 1 file changed)
     
   • VideoPlayer: keyframes (PR:12986, 2 commits, 9 files changed)
     
   • ffmpeg: adapt to deprecated symbols and functions (PR:12988, 1 commit, 16 files changed)
     
3. inputstream.adaptive:
   • Fix wrong stream insertion when using manual stream selection (853144d)
     
4. pvr.vdr.vnsi:
   • fix segfault after demuxer connection got lost (87cee69)
     
   • bump version to 3.4.4 (92e4c64)
     
5. Additional commits/pull requests/changes not yet merged upstream:
   • Updated: [env] PR:2092: kodi: batched updates
     
   • Added: [pkg] PR:12991: VideoPlayer: fix #12986, was messed up by revert and re-submit
     

(2017-11-01, 21:07)Milhouse Wrote: [ -> ]

(2017-11-01, 07:45)YinYang Wrote: [ -> ]Hello everybody

I have an important question ....
I own a Zotac ZBOX CI547 nano and running on it liebreelec 9 of Milhouse.
Unfortunately, I have seen that there are problems with the drivers in Linux, which makes the passthrough of HD audio via HDMI impossible.
But I have read that there is now a solution is that correct?
do I have to make or have a bios update for it?

Unfortunately, Zotac has not released any bios update although the box is based on a nuc.

My Hardware ZBOX CI547 NANO https://www.zotac.com/us/product/mini_pcs/ci547-nano

I would be very grateful and happy about an education and apology for my bad english i use a translator.

lg
YY

The latest test builds in this thread include the HBR (high Bit Rate) audio patches to allow HD Audio via HDMI on Apollo/Kaby/etc Lake devices.

However you may need to upgrade the LSPCON firmware to v1.66, which can only be done using Windows:

http://nucblog.net/2017/03/intel-release...kaby-lake/

If you have further issues I would suggest you post in the Kaby Lake Support thread.

Thx Milhouse I will test it

Hi,
I use an Tronsmart Ara x5 plus which is like the common Cherrytrail Intel dongle and since #901 I had the no audio via hdmi issue (last tested #1031).
However, I am able to play a wav file when running aplay to plughw:0,2 and it does come out from the hdmi.
I tried creating asound.conf in ~/.config but it did not take effect after restart. How can i make it permanent without rebuilding libreelec from scratch? Or, is there a gui menu item which allows sub device selection that i missed which contradicts the system settings?

Thanks!

hi guys

i am new to this project, running a asrock beebox w intel j3160, used libreelec 8.1 w kodi 17.3 before but want to use the dazn addon which was not running with kodi 17.3...so i am on the latest test build everything works fine w dazn also but  got the double button press problem with my standard remote, after searching around i find an empty keymap,
so which way to go now?
edit: solved..deactivated LIRC in LE setting addon

(2017-11-01, 21:07)Milhouse Wrote: [ -> ]The latest test builds in this thread include the HBR (high Bit Rate) audio patches to allow HD Audio via HDMI on Apollo/Kaby/etc Lake devices.

However you may need to upgrade the LSPCON firmware to v1.66, which can only be done using Windows:

http://nucblog.net/2017/03/intel-release...kaby-lake/

If you have further issues I would suggest you post in the Kaby Lake Support thread.

Actually there is a new LSPCON firmware 1.72 released 2 days ago from Intel. Don't know exactly what is new.

(2017-11-02, 08:24)damagedspline Wrote: [ -> ]Hi,
I use an Tronsmart Ara x5 plus which is like the common Cherrytrail Intel dongle and since #901 I had the no audio via hdmi issue (last tested #1031).
However,  I am able to play a wav file when running aplay to plughw:0,2 and it does come out from the hdmi.
I tried creating asound.conf in ~/.config but it did not take effect after restart. How can i make it permanent without rebuilding libreelec from scratch? Or, is there a gui menu item which allows sub device selection that i missed which contradicts the system settings?

Thanks!

/storage/.config/asound.conf should be used after a reboot - are you sure your asound.conf is correct?

For now this is more likely to be a bug in the kernel (IMHO).

Phils opened a bug: https://bugs.freedesktop.org/show_bug.cgi?id=103299 which may have been erroneously closed as a dupe of this potentially unrelated PulseAudio bug: https://bugs.freedesktop.org/show_bug.cgi?id=100488 so worth keeping an eye on them for now. There's also this bug on Arch which despite being reported as a "pure ALSA setup without PulseAudio" is now classified as a PulseAudio bug! So unfortunately, I don't think anyone has a clue what is going on.

(2017-11-02, 10:06)laric Wrote: [ -> ]Actually there is a new LSPCON firmware 1.72 released 2 days ago from Intel. Don't know exactly what is new.

Info from Intel:

Updates the HDMI Firmware version to 1.72 for the Intel® NUC Kit families, NUC6CAY and NUC7ixBN. This update fixes:

• An issue where a head mounted display would not wake up from sleep (S3) using Windows* Mixed Reality.
  

Note: An HDMI device must be connected and an Intel® Graphics Driver must be installed before this update is run.  The instructions are in the .zip file.

New LibreELEC.tv Leia build #1102: Generic
(Supercedes previous build)

SHA256 Checksum: f1594917e47ad0974a26571accc7d0f6e8a457d9c04738c594c5ed80ae06023b (Generic)


Based on tip of LibreELEC.tv master (fceb13f, changelog) and tip of XBMC master (283cc5f, changelog) with the following modifications:

• Includes latest kodi-platform master (36fb493)
  
• Includes latest libcec master (8adc786, ahead +26)
  
• Includes latest libnfs master (7c68a3d, ahead +106)
  
• Includes latest p8-platform master (a822e19)
  
• Includes latest addons: inputstream.adaptive (853144d), inputstream.rtmp (0702f7e), peripheral.joystick (a5cc154), pvr.argustv (23cc0e8), pvr.demo (122dedd), pvr.dvblink (816f90c), pvr.dvbviewer (afe584a), pvr.filmon (f67f905), pvr.hdhomerun (ddfe2cb), pvr.hts (295893c), pvr.iptvsimple (ac4f4bd), pvr.mediaportal.tvserver (fa1069d), pvr.mythtv (d5a6aa3), pvr.nextpvr (5b7caa2), pvr.njoy (cc1cb56), pvr.octonet (f1f8d44), pvr.pctv (c6d10cb), pvr.stalker (5f53d18), pvr.teleboy (2d092c4), pvr.vbox (56052da), pvr.vdr.vnsi (92e4c64), pvr.vuplus (eb0d16d), pvr.wmc (02edba6), pvr.zattoo (70fafbe)
  
• Include [env] compare: connman: timeserver: Retry NTP servers periodically on startup
  
• Include [env] compare: dmidecode: initial package
  
• Include [env] patch: RPi/RPi2: enable Broadcom WiFi debugging (see details)
  
• Include [env] patch: libcec: don't link non-existant libtinfo
  
• Include [env] patch: rev hack for kodi
  
• Include [env] patch: media_build: disable due to conflicts
  
• Include [env] patch: Add experimental splash video for RPi
  
• Include [env] patch: Bump included addon versions to prevent online updates
  
• Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
  
• Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, other)
  
• Include [env] patch: pvr addons: disable broken addons
  
• Include [env] PR:2002: linux: include HBR and ELD fixes for Intel
  
• Include [env] PR:2118: linux: update to linux-4.13.10
  
• Include [env] PR:2138: removed OE mirror links
  
• Include [env] PR:2144: Tvheadend 4.2 rework to use ffmpegx
  
• Include [env] PR:2169: brcmfmac_sdio-firmware-rpi: update to brcmfmac_sdio-firmware-rpi-13edcc7
  
• Include [env] PR:2171: samba: update to samba-4.7.1
  
• Include [env] PR:2173: xf86-video-nvidia: update to xf86-video-nvidia-374.98
  
• Include [pkg] patch: skin.estuary: reduce system info font size (kodi)
  

Build Highlights:

1. samba: update to samba-4.7.1
   
2. xf86-video-nvidia: update to xf86-video-nvidia-374.98
   

Build Details:

1. LibreELEC.tv:
   • sundtek-mediatv: support new driver version ... (PR:2147, 1 commit, 4 files changed)
     
   • kodi: batched updates (PR:2092, 6 commits, 43 files changed)
     
   • systemd: meson-remote is not a joystick (PR:2170, 1 commit, 1 file changed)
     
   • Remove unneeded glu et al (PR:2161, 8 commits, 8 files changed)
     
   • docker: rename docker to moby (PR:1670, 1 commit, 5 files changed)
     
2. XBMC:
   • VideoPlayer: fix #12986, was messed up by revert and re-submit (PR:12991, 2 commits, 1 file changed)
     
   • [Windows]: add support of Universal Windows Platform. (PR:12942, 28 commits, 187 files changed)
     
   • [win32] ID3DResource: remove unused methods. (PR:12993, 1 commit, 5 files changed)
     
   • VideoPlayer: remove unused variable (055f6ee)
     
3. pvr.octonet:
   • win10: fix linkage to deprecated wsock32 api. (f1f8d44)
     
4. Additional commits/pull requests/changes not yet merged upstream:
   • Added: [env] PR:2169: brcmfmac_sdio-firmware-rpi: update to brcmfmac_sdio-firmware-rpi-13edcc7
     
   • Added: [env] PR:2171: samba: update to samba-4.7.1
     
   • Added: [env] PR:2173: xf86-video-nvidia: update to xf86-video-nvidia-374.98
     

New LibreELEC.tv Leia build #1103: Generic
(Supercedes previous build)

SHA256 Checksum: a24ce92deb7329d6abb06acfe0bb8f0fb44a72ee9c8a9159e3e9db947761c50b (Generic)


Based on tip of LibreELEC.tv master (6de54b9, changelog) and tip of XBMC master (76fb483, changelog) with the following modifications:

• Includes latest kodi-platform master (36fb493)
  
• Includes latest libcec master (8adc786, ahead +26)
  
• Includes latest libnfs master (7c68a3d, ahead +106)
  
• Includes latest p8-platform master (a822e19)
  
• Includes latest addons: inputstream.adaptive (c0709fe, +1), inputstream.rtmp (0702f7e), peripheral.joystick (a5cc154), pvr.argustv (23cc0e8), pvr.demo (122dedd), pvr.dvblink (816f90c), pvr.dvbviewer (afe584a), pvr.filmon (f67f905), pvr.hdhomerun (ddfe2cb), pvr.hts (295893c), pvr.iptvsimple (ac4f4bd), pvr.mediaportal.tvserver (fa1069d), pvr.mythtv (d5a6aa3), pvr.nextpvr (5b7caa2), pvr.njoy (cc1cb56), pvr.octonet (f1f8d44), pvr.pctv (c6d10cb), pvr.stalker (5f53d18), pvr.teleboy (2d092c4), pvr.vbox (56052da), pvr.vdr.vnsi (69ed6ed, +1), pvr.vuplus (eb0d16d), pvr.wmc (02edba6), pvr.zattoo (70fafbe)
  
• Include [env] compare: connman: timeserver: Retry NTP servers periodically on startup
  
• Include [env] compare: dmidecode: initial package
  
• Include [env] compare: kodi: updates for Dec 2017
  
• Include [env] patch: RPi/RPi2: enable Broadcom WiFi debugging (see details)
  
• Include [env] patch: libcec: don't link non-existant libtinfo
  
• Include [env] patch: rev hack for kodi
  
• Include [env] patch: media_build: disable due to conflicts
  
• Include [env] patch: Add experimental splash video for RPi
  
• Include [env] patch: Bump included addon versions to prevent online updates
  
• Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
  
• Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, other)
  
• Include [env] patch: pvr addons: disable broken addons
  
• Include [env] PR:2002: linux: include HBR and ELD fixes for Intel
  
• Include [env] PR:2118: linux: update to linux-4.13.11
  
• Include [env] PR:2138: removed OE mirror links
  
• Include [env] PR:2144: Tvheadend 4.2 rework to use ffmpegx
  
• Include [env] PR:2169: brcmfmac_sdio-firmware-rpi: update to brcmfmac_sdio-firmware-rpi-13edcc7
  
• Include [env] PR:2171: samba: update to samba-4.7.1
  
• Include [env] PR:2173: xf86-video-nvidia: update to xf86-video-nvidia-374.98
  
• Include [pkg] patch: skin.estuary: reduce system info font size (kodi)
  

Build Highlights:

1. New 4.13.11 kernel
   

Build Details:

1. LibreELEC.tv:
   • Odroid_C2/u-boot: move to project specific package (PR:2175, 1 commit, 10 files changed)
     
2. XBMC:
   • [win10] fix patch utility version. (PR:12997, 1 commit, 1 file changed)
     
   • FIX: [doc;droid] now requires SDK 24 (PR:13000, 1 commit, 1 file changed)
     
   • [cmake] support building with ninja on posix platforms (PR:12936, 2 commits, 9 files changed)
     
   • [winstore][fix] Remove include that breaks on newer SDK versions, isn't used anyway (PR:12999, 1 commit, 1 file changed)
     
   • [linux] remove imx platform (PR:12990, 1 commit, 41 files changed)
     
   • windowing/gbm: fix setting drm mode when no new window is created (PR:12989, 1 commit, 1 file changed)
     
3. inputstream.adaptive:
   • win10: fix arm build (PR:86, 1 commit, 1 file changed)
     
4. pvr.vdr.vnsi:
   • fix potential segfault if login fails (69ed6ed)
     
5. Additional commits/pull requests/changes not yet merged upstream:
   • Added: [env] compare: kodi: updates for Dec 2017