2011-01-31, 15:41
Hi im on the verge of selling my mce301 case. Iv done a clean install of dharma 10.0 live and installed irtrans server version: 6.03.08 and cant get any output at all from my philips rc197 remote iv run the following:
sudo /usr/local/irtrans/irserver -loglevel 4 -codedump /dev/ttyUSB0
and i get the following:
When i press the remote nothing is displayed in terminal i also noticed there is no FW SNo : 0 Could this be a firmware problem with the unit will i need to reflash the ir/vfd display.
Thanks
sudo /usr/local/irtrans/irserver -loglevel 4 -codedump /dev/ttyUSB0
and i get the following:
Code:
Init Server Socket done
IRServer Version 6.03.08
Init Events done
Opening Device: /dev/ttyUSB0
IRTRans Send Done: 1
Name :
,.,mmkll;;''
FW SNo : 0
Capab : Power On;
FW Cap : 0x3c8019
FW Cap2: 0x9
USB SNo:
Node : /dev/ttyUSB0
Init communication ...
[ 0]: D5.11.07
Chdir to DB OK
Read routing OK
Read Switches OK
Open DIR: 13
Get Dirent: 316
Remote sky-digital compiled: 1 Timings - 31 Commands
Remote irtrans compiled: 1 Timings - 33 Commands
Remote mce-keyboard compiled: 1 Timings - 77 Commands
Remote sky-hd compiled: 1 Timings - 34 Commands
Remote kathrein-ufs compiled: 2 Timings - 36 Commands
Remote pace compiled: 2 Timings - 38 Commands
Remote compiled: 0 Timings - 0 Commands
Remote dream compiled: 0 Timings - 36 Commands
Remote mce-mouse compiled: 1 Timings - 1 Commands
Remote mediacenter compiled: 1 Timings - 49 Commands
Get Dirent: 0
Duplicate Commands for pace.0: pace.0-
Total: 10 Remotes - 10 Timings - 335 Commands - 0 Calib. Commands
0 Togglec. - 0 CCF Data - 0 CCF RAW - 0 CCF Error
IRTRans Send Done: 1
IRTRans Send Done: 1
When i press the remote nothing is displayed in terminal i also noticed there is no FW SNo : 0 Could this be a firmware problem with the unit will i need to reflash the ir/vfd display.
Thanks