[LINUX] HOW-TO get Live TV with VDR working in XBMC for Linux - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: Tips, tricks, and step by step guides (https://forum.kodi.tv/forumdisplay.php?fid=110) +--- Thread: [LINUX] HOW-TO get Live TV with VDR working in XBMC for Linux (/showthread.php?tid=45314) |
- Swifty - 2009-05-02 Well, hats off to you Freezy! The guide was brilliant.. a few things seem to have changed since it was put together, but I have fumbled through and have working VDR + XBMC! I've made notes of all the parts I had to do that weren't in the notes, and will put them into some sort of order in the morning so the guide can be updated. One thing I am having problems with though is the channels.conf (i'm currently using a downloaded one for Astra 28.2 but most of the channels are from germany) I scanned my card (first tuner is a Hauppage Nova HD S2 - DVB-S/2) by running ; scan ~/Astra-28.2 > channels.conf It picked up all the channels and put them into the conf file, which I then copied to /etc/vdr. However when I launch 'runvdr' I was getting the error "vdr: error while reading '/etc/vdr/channels.conf'" I initially used the scan command from your guide (I have a second tuner in the PC which is DVB-T) but that also gave the same problem.. as soon as I used the one I downloaded from the internet it worked fine Thanks! **EDIT** Ok, a little sleep sussed this one.. never trying setting anything up in Linux when your a noob at 1am :p Scan requires the parameter '-o vdr' to give output that is compatable with VDR.. Now just need to figure out why the EPG is only showing info for about 6 channels! - Swifty - 2009-05-02 Ok, well I think I just have to wait a while for the EPG? I can stream all channels fine but only see EPG data for a few channels (I have nearly 300) Looking around the wiki and searching google it would seem there isn't any way to force an EPG update (as the button isn't implemented into XBMC yet) So I have set EPG scan timeout to 1hour, and I'll just leave it alone for a bit and see if it updates. Also I noticed whenever I enter the 'timeline' view for the EPG that XBMC crashes with 'segmentation fault' - I guess this could be because no data is there for some of the channels.. anyone else have this issue ? Anyway, looks really good so far - channel changing is RAPID!! - dongioia - 2009-05-02 semerchet Wrote:I don't think so. I've no problems with stability in jaunty. The problem with the hdtv-channels is a xbmc-related problem, maybe not for a long time. There i a ticket for this. :-) I gave Jaunty another shot. The stability issues of XBMC was related to the latest nvidia beta driver I installed (185.18.04). I switched to the previous version and all my problems are gone. By the way, XBMC sometimes crashes displayng HDtv channels. @freezy I used different libraries for xine, wich support vdpau without any patch and there is no need to install ffmpeg: xine libraries with vdpau Quote:sudo -s xine-ui #for testng Quote:cd /usr/local/src Next vdr can be installed. The latest xinelibout plugin supports vdpau. - Swifty - 2009-05-02 Well I've left it for a few hours and no update to the EPG.. is there another setting somewhere I need to configure ? Also I haven't figured out how to combine my DVB-T channels into the channel list.. I have one DVB-S tuner (currently can view channels through VDR) but I also have a DVB-T tuner for some channels I can't get on Freesat, can anyone point me in the right direction for adding these channels so that I can have a mix of DVB-S and DVB-T ? Cheers! - steveh80 - 2009-05-02 Swifty Wrote:Ok, well I think I just have to wait a while for the EPG?Hi Swifty, you can force an epg update using the svdrpsend command. It must be something like that: Code: svdrpsend SCAN You have to do that only one time, vdr is caching its epg data. And if you are using only one dvb-card, be sure not to watch tv while scanning, so vdr can change transponders as he need. You can follow the scan in /var/log/syslog. The timeline crash is a known issue, they are working on it. - Swifty - 2009-05-02 Hi Steve, Thanks for your reply, I have just tried your suggestion but I get a terminal message saying svdrpsend isn't installed and can be installed via apt-get install vdr.. I guess if I do this it's going to re-install the current VDR release over mine, so I haven't done it. I've done some reading on the command and it mentions you can simply telnet in to VDR on port 2001 but that doesn't seem to work either.. **EDIT** Ok scratch that I'm in over telnet (not sure what I done differently..) EPG scan has now been triggered! Thanks Steve!! - WBFT - 2009-05-05 Hi i followed your guide, and its really great. Only I get stuck on one point. Code: vdr@UbuntuStation:~/src/vdr/PLUGINS/src$ wget http://xbmc.org/raw-attachment/ticket/5595/streamdev-cvs220409_xbmc-v6.patch wget http://www.xbmc.org/trac/attachment/ticket/5595/streamdev-cvs220409_xbmc-v6.patch This one work when downloading but when I try to patch it I get. Code: vdr@UbuntuStation:~/src/vdr/PLUGINS/src$ patch -p0 < streamdev-cvs220409_xbmc-v6.patchpatch unexpectedly ends in middle of line Can you help me out with this one? Figured it out. wget http://www.xbmc.org/trac/raw-attachment/ticket/5595/streamdev-cvs220409_xbmc-v6.patch is the correct link. - beckynet - 2009-05-07 Thanks Freezy for your great How-To The final release of XBMC 9.04 is available. Can you update your How-to with it ? Thanks a Lot Olivier Beeckmans - freezy - 2009-05-08 Basically you could just update to the latest revision instead of the one mentioned, and see if the patch applies correctly (chances are good). The Babylon PPA is obviously of little use, since you'll need to recompile anyway. - beckynet - 2009-05-08 Thanks Freezy for your respons. I've try but no chance with the last version and the patch. I receive error when I patch, and when I compile. The trouble come from Undefined Variables GUIWindows after patching Thanks a Lot Olivier - beckynet - 2009-05-08 Freezy, I've try but no chance that don't run Code: vdr@vdrxbmc:~/src/$ svn co [url]https://xbmc.svn.sourceforge.net/svnroot/xbmc/branches/linuxport/XBMC[/url] XBMC Code: vdr@vdrxbmc:~/src/$ cd XBMC Code: vdr@vdrxbmc:~/src/XBMC$ ./configure --enable-vdpau Code: vdr@vdrxbmc:~/src/XBMC$ make I've used the last available patch Thanks Olivier Error compiling xineliboutput, missing lXv - tmpdir - 2009-05-08 Hi i'm getting a compile error when following the howto at the begin of this thread on a clean install of mythbuntu 8.10. In the howto its the part below the text “For testing VDR "standalone...”. After making the xineliboutput I get the following messages from the compiler: gcc -g -O2 -Wall -fPIC -I/usr/local/include -shared -fvisibility=hidden xine_sxfe_frontend.o xine/post.o -L/usr/X11R6/lib -lX11 -lXv -lXext -lXrender -L/usr/local/lib -lxine -o libxineliboutput-sxfe.so /usr/bin/ld: cannot find -lXv collect2: ld returned 1 exit status make: *** [libxineliboutput-sxfe.so] Error 1 root@htpc:/home/vdr/src/vdr/PLUGINS/src/xineliboutput# Don't now the lXv library, but I assume its part of the Xine library. Anyone ideas why its missing when following the howto or how I can still get it working? Edit: Solved by getting the latest xineliboutput from CVS. For future reference: cvs -d:pserver:[email protected]:/cvsroot/xineliboutput login cvs -z3 -d:pserver:[email protected]:/cvsroot/xineliboutput co -P vdr-xineliboutput - beckynet - 2009-05-08 Hello tmpdir do : apt-get install xv apt-get purge libxine2-dev and after that redo the part about Xine Library after you can compile xineliboutput @+ Olivier - ibydos - 2009-05-08 hi, I have spend the whole day setting up ubuntu9.04_minimal. Followed the guide at Page1 and iam stuck at part 5 (startvdr) "runvdr" itself works After "runvdr" I did "xinit" and then "vdr-sxfe --video=xv" ERROR: Code: Log of vdr-sxfe --video=xv Thats the first problems, some say it still works in XBMC, but thats my next question. Im kind of confused in what version of XBMC to use (and what patch). I tried this (from the first post): Code: svn co http://xbmc.svn.sourceforge.net/svnroot/xbmc/branches/linuxport/ -r 19616 But I cant download the patch, seems it is gone. Please let me know the most recent xbmx build+patch(working ones) My System: P4 2.8GHZ 1GB RAM Geforce 8400GS Win-TV Nova-HD-S2 Best ibydos - rickx - 2009-05-09 ibydos Wrote:hi, That's the same problem I get. The how-to never worked for me, or in other words, xv never worked. Whatever the driver, I always got that buffer too small error. The rest looked good. The xbmc patch applied well until not so long ago. I guess around revision 19900 or so should be ok. bye, rickx |