Kodi Community Forum
v18 LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) - Printable Version

+- Kodi Community Forum (https://forum.kodi.tv)
+-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33)
+--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111)
+---- Forum: Raspberry Pi (https://forum.kodi.tv/forumdisplay.php?fid=166)
+---- Thread: v18 LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) (/showthread.php?tid=298461)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495

RE: LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) - doldi - 2018-03-11

latest update to #310 is not better for handling with mouse - scrolling i a folder is terrible and the progress bar => act one ones iniative ;-)

RE: LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) - Bosode - 2018-03-11

Full IPv6 - Support missing

Hi all,

I'm not sure, if only my RPi3 didn't work correctly. My prob is, that I want to connect via WebDav to a WebDavShare at my colleagues home. He uses a fibre connection to the web and his provider allows and supports only IPV6-Connections.

My RPi3 get's an IPV6-Adresse within my LAN - but this one isn't for use outside - means, my RasPi didn't get a global IPV6.

All other Devices in my LAN are getting an global IPV6 from my Fritz!Box 7590 - so the IPV6-Support from my DHCP (the Fritz!Box) is existent and works well, because I can connect with my iPhone and my also used AFTV-Stick (with Kodi on it too (v.17.6) to my colleagues share via there global the used IPV6 from this devices.

My Fritzbox shows me, that the RPi3 didn't get an global IPV6 - only an internal IPV6, wich starts with "fe80:" - the global one hast to start with "2001:"...
Ifconfig via SSH shows the same on RPi3...

Further Informations:
My RasPi3 is connectet via Cable to the Fritz!Box

My Settings are:
Milhouse Build #0307 (same with #0302 & #0303)

LibreElec - Network - WLAN -> off
LibreElec - Network - Cable -> on
Connection - Wired - Settings - IPv4 -> DHCP
Connection - Wired - Settings - IPv6 -> Auto 
Even if I switch this to "manual" and set some settings, IPv6 won't work correctly and no global IP were set....

Where is my fault? What have I to do, to edit or to switch on or off to get full IPv6 Support working?

​​​​​​​Thanks for Reply

RE: LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) - Milhouse - 2018-03-12

New LibreELEC.tv Leia build #0311: RPi / RPi2
(Supercedes previous build)

SHA256 Checksum: de7cec02afd3a5af9127c2ff35784754570e532d6f2894428ab2bc2de6e00dbd (RPi)
SHA256 Checksum: 324e7c1a589d8c10d6293ee00d3f6399eeb6f8bf4afb7fe22678461ee853f685 (RPi2)

text:
# uname -a

Linux rpi512 4.14.24 #1 Sun Mar 11 21:06:05 GMT 2018 armv6l GNU/Linux



# vcgencmd version

Mar  9 2018 20:00:26 

Copyright © 2012 Broadcom

version a113099ad5cf63c7ce12c4f579655b258ba33ebe (clean) (release)



# lsb_release

LibreELEC (Milhouse): devel-20180311210422-#0311-g0a89bee [Build #0311]



# Kodi version

(18.0-ALPHA2 Git:89a53e4). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (0a89bee, changelog) and tip of XBMC master (4bd20f5, changelog) with the following modifications: Build Highlights:
  1. AE: init struct AESinkRegEntry
Build Details:
  1. LibreELEC.tv:
    • iptables: Fix "public" ruleset order (PR:2569, 1 commit, 2 files changed)
    • settings: bump package for firewall fixes (PR:2574, 1 commit, 1 file changed)
  2. XBMC:
    • AE: init struct AESinkRegEntry (PR:13636, 1 commit, 1 file changed)
    • [GBM] implement missing OnDisplayLost/OnDisplayReset notifications (PR:13629, 2 commits, 7 files changed)
    • GUIInfoManager: revert 8809df940d265f79e3d529b6591a2c8333ed06d6, this (PR:13631, 1 commit, 2 files changed)


RE: LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) - Milhouse - 2018-03-12

(2018-03-11, 18:36)Bosode Wrote: Full IPv6 - Support missing

Can you test LibreELEC 8.2.3 and if that has the same problem it should be reported on the LibreELEC forum.

RE: LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) - rudrood - 2018-03-12

@popcornmix:
Found that starting with build 0307 my overclocked RPI3 also crashes with h264 thvheadend footage.
The crash happens direct when I start a channel. The image stops but the sound continues.

The config I used for testing looks like this: 
arm_freq=1300
over_voltage=2
sdram_freq=550
over_voltage_sdram=5
sdram_schmoo=0x02000020
dtoverlay=sdtweak,overclock_50=83
# gpu_freq=500
core_freq=500
isp_freq=500
h264_freq=500
v3d_freq=500

The maximum gpu config that doesn't crash is:
core_freq=500
# isp_freq=500
# h264_freq=500
# v3d_freq=500

Strangest thing is that even though it's h264 data, the PI crashes when I keep h264_freq=500 disabled but with isp_freq and v3d_freq enabled (also separate).

When I replace fixup.dat and start.elf with the ones you've posted earlier the problem is gone with the full overclock config (with build 0307 till 0311).

RE: LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) - popcornmix - 2018-03-12

@rudrood Does the crash still occur if advanced deinterlace is disabled?
When enabled that uses 3d hardware and hence v3d_freq.

RE: LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) - rudrood - 2018-03-12

@popcornmix

Tested:
# gpu_freq=500
core_freq=500
#isp_freq=500
#h264_freq=500
v3d_freq=500

No crash with bob, as soon as I enable advanced it crashes.

RE: LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) - Milhouse - 2018-03-13

New LibreELEC.tv Leia build #0312: RPi / RPi2
(Supercedes previous build)

SHA256 Checksum: 1e9295e175919a91e21067f4a45f6fccd459a04adff42895e0be9e9a228830bd (RPi)
SHA256 Checksum: 9566fa2d6005aa995069155697013d122f42ee4542ca1cf5d5926b762bc48778 (RPi2)

text:
# uname -a

Linux rpi512 4.14.24 #1 Mon Mar 12 21:06:28 GMT 2018 armv6l GNU/Linux



# vcgencmd version

Mar  9 2018 20:00:26 

Copyright © 2012 Broadcom

version a113099ad5cf63c7ce12c4f579655b258ba33ebe (clean) (release)



# lsb_release

LibreELEC (Milhouse): devel-20180312210438-#0312-g6130d1d [Build #0312]



# Kodi version

(18.0-ALPHA2 Git:89a53e4). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (6130d1d, changelog) and tip of XBMC master (5e2d291, changelog) with the following modifications: Build Highlights:
  1. Various language updates
Build Details:
  1. LibreELEC.tv:
    • amlogic: changes for qca9377 sdio module (PR:2544, 1 commit, 5 files changed)
    • linux: switch to Raspberry Pi vendor kernel (PR:2566, 11 commits, 20 files changed)
  2. XBMC:
    • FIX: crash: playerfactory is not initialized when using profile login (PR:13635, 1 commit, 1 file changed)
    • [lang][kodi.core] automatic syntax corrections for the en_GB language file (ce304e5)
    • [lang][skin.estuary] updated language files from Transifex (d9b27ef)
    • [lang][skin.estouchy] updated language files from Transifex (f30dccf)
  3. pvr.argustv:
    • [lang] updated language files from Transifex (3556049)
  4. pvr.dvblink:
    • [lang] updated language files from Transifex (594e062)
  5. pvr.dvbviewer:
    • [lang] updated language files from Transifex (05cff5b)
  6. pvr.filmon:
    • [lang] updated language files from Transifex (c7243fb)
  7. pvr.hdhomerun:
    • [lang] updated language files from Transifex (f3e0177)
  8. pvr.mediaportal.tvserver:
    • [lang] updated language files from Transifex (74e2bea)
  9. pvr.vuplus:
    • [lang] updated language files from Transifex (dc230dd)
  10. pvr.wmc:
    • [lang] updated language files from Transifex (e0a9190)
  11. kernel 4.14.y:
    • New commits in this build:
      • arm64: enable thermal / enable mmc (#2425) (add09058)
  12. Additional commits/pull requests/changes not yet merged upstream:
    • Added: [env] PR:2577 (perma): buildsystem: simplify SIMD support (neon/mmx/sse/sse2)


RE: LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) - HpNoTiQ - 2018-03-13

Hi,
I've tested build #310 on RPI 3 but keyboard settings to change from US keyboard to Fr keyboard is not working. It's fully working on Kodi 17.6 (Libre elec 8.2.3)

I've used Libreelec settings (and not kodi settings).

RE: LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) - popcornmix - 2018-03-13

@rudrood @J_E_F_F Can you test this firmware: https://drive.google.com/uc?id=1UySODq-fF47C3e-wqObvvrTIqOt2DUH4&export=download

You should extract start_x.elf and fixup_x.dat, rename to start.elf / fixup.dat and replace the ones visible on sdcard (or in /flash when ssh-ed in).

Does it fix you overclock hevc/deinterlace related issues?

RE: LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) - Milhouse - 2018-03-13

(2018-03-13, 09:29)HpNoTiQ Wrote: Hi,
I've tested build #310 on RPI 3 but keyboard settings to change from US keyboard to Fr keyboard is not working. It's fully working on Kodi 17.6 (Libre elec 8.2.3)

I've used Libreelec settings (and not kodi settings).

Most likely the libinput change in #0302.

RE: LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) - rudrood - 2018-03-13

(2018-03-13, 16:06)popcornmix Wrote: @rudrood @J_E_F_F Can you test this firmware: https://drive.google.com/uc?id=1UySODq-fF47C3e-wqObvvrTIqOt2DUH4&export=download

You should extract start_x.elf and fixup_x.dat, rename to start.elf / fixup.dat and replace the ones visible on sdcard (or in /flash when ssh-ed in).

Does it fix you overclock hevc/deinterlace related issues?
Yes, working oke till now. No problems with:

core_freq=500
isp_freq=500
h264_freq=500
v3d_freq=500

RE: LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) - popcornmix - 2018-03-13

(2018-03-13, 17:07)rudrood Wrote: Yes, working oke till now. No problems with:

Thanks that is good to know.
@J_E_F_F would be good to confirm if your hevc issue is fixed.

RE: LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) - doldi - 2018-03-13

With #312 i a have yet the problem on my rpi3 and also on a rpi2 with the mouse => scrolling in a big folder and select something is absolutly impossible, also in the skin.
The scrollbar (video/audio) is moving/shifting if i touch the mouse.

Harald

edit: back to 8.2.3 and this all will work fine on both pi.

RE: LibreELEC Testbuilds for RaspberryPi (Kodi 18.0) - da-anda - 2018-03-13

since I'm thinking about moving over to HEVC from h264 for new encodes I do, is "fastdecode" flag in Handbrake still needed to get decent performance on a PI3, or doesn't it matter that much anymore after all the optimizations done for the PI? I gave it a quick test with a sample the other day, and it seemed to play fine on a non-overclocked PI3, albeit all 4 cores seemed to be maxed out. I tried an older test encode from over a year ago that I remember I had done using "fastdecode" flag, and CPU usage was down at like 30%. So I assume it's still a thing, but I'm not sure if it was just related to the test-sample I did without fastdecode and that a different movie/sample might perform better.