(2018-03-24, 17:13)frank74 Wrote: second, i using tvheadend (master train/last version) and with tvheadend i have audio offset (no stuttering etc). the offset starts from the beginning (in the fist minute its not to big that this can be seen) but the offset becomes more and more... in 10min its about 1-2seconds. The codec is mpeg2 and the video-decoder ff-mpeg2video-mmal (SW) because i've got a new raspberry pi 3b+ and have no mpeg license at the moment.
I don't know since when this problem exists because I'm starting with the alpha and I'm not able to test it in the next weeks.

(2018-03-26, 11:32)Memphiz Wrote: Ensure hanewin is set to utf8 charset

(2018-03-26, 13:48)popcornmix Wrote:

(2018-03-24, 17:13)frank74 Wrote: second, i using tvheadend (master train/last version) and with tvheadend i have audio offset (no stuttering etc). the offset starts from the beginning (in the fist minute its not to big that this can be seen) but the offset becomes more and more... in 10min its about 1-2seconds. The codec is mpeg2 and the video-decoder ff-mpeg2video-mmal (SW) because i've got a new raspberry pi 3b+ and have no mpeg license at the moment.
I don't know since when this problem exists because I'm starting with the alpha and I'm not able to test it in the next weeks.

Do you have the same issue when playing a recording? If so a sample recording that shows the problem would be useful. 

(2018-03-26, 15:13)frank74 Wrote: I tested it and yes, after about 1 minute i've the same problem. I stopped it several time and start it (from the beginning and in the middle of the clip) and after 30sec-1min i got the offset from about 1sec

(2018-03-26, 18:32)popcornmix Wrote:

(2018-03-26, 15:13)frank74 Wrote: I tested it and yes, after about 1 minute i've the same problem. I stopped it several time and start it (from the beginning and in the middle of the clip) and after 30sec-1min i got the offset from about 1sec

I'm not seeing any sync problem with that file. It's been playing for 42 minutes and audio sync still seems good.
I have MMAL/omxplayer disabled. Otherwise audio settings are default (HDMI output, no passthrough, no pll).

Do you have any non-default settings? E.g. PLL adjustment?    

text:
# uname -a

Linux rpi512 4.14.30 #1 Mon Mar 26 21:10:24 BST 2018 armv6l GNU/Linux



# vcgencmd version

Mar 23 2018 16:35:52 

Copyright © 2012 Broadcom

version d92349b3d22c277e44d508a2aae6af2b1e5bb224 (clean) (release)



# lsb_release

LibreELEC (Milhouse): devel-20180326210348-#0326-g76b2ce2 [Build #0326]



# Kodi version

(18.0-ALPHA2 Git:9af16f4). Platform: Linux ARM 32-bit

• Includes newclock5 patches
  
• Includes latest bcm2835-driver master (75de5d7)
  
• Includes latest kodi-platform master (e8574b8)
  
• Includes latest libcec master (8adc786, ahead +26)
  
• Includes latest libnfs master (54405d9, ahead +120)
  
• Includes latest p8-platform master (a822e19)
  
• Includes latest addons: inputstream.adaptive (c759106, +19), inputstream.rtmp (7fe7dde, +2), peripheral.joystick (80224e1, +4), pvr.argustv (3556049), pvr.demo (8f62053), pvr.dvblink (d48fc19, +2), pvr.dvbviewer (f1746c5, +1), pvr.filmon (c7243fb), pvr.hdhomerun (f3e0177), pvr.hts (095784b), pvr.iptvsimple (933a5c4), pvr.mediaportal.tvserver (74e2bea), pvr.mythtv (ec7daca, +4), pvr.nextpvr (aa1c8d2), pvr.njoy (67b837d), pvr.octonet (689afbf), pvr.pctv (5b47d9f), pvr.stalker (77eec69), pvr.teleboy (a7176f3, +2), pvr.vbox (57f3198), pvr.vdr.vnsi (4db947c), pvr.vuplus (dc230dd), pvr.wmc (e0a9190), pvr.zattoo (3c46173), vfs.libarchive (e7d149e, +2)
  
• Exclude [env] kodi-0100-temp-add-pr13594.patch: merged upstream
  
• Include [env] compare (perma): dmidecode: initial package
  
• Include [env] patch: RPi/RPi2: enable Broadcom WiFi debugging (see details)
  
• Include [env] patch: libcec: fix PR390
  
• Include [env] patch: libcec: don't link non-existant libtinfo
  
• Include [env] patch: rev hack for kodi
  
• Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
  
• Include [env] patch: Add experimental splash video for RPi
  
• Include [env] patch: Bump included addon versions to prevent online updates
  
• Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, other)
  
• Include [env] PR:2529 (perma): buildsystem: support get handlers (archive, file, git)
  
• Include [env] PR:2533 (perma): graphics package updates
  
• Include [env] PR:2585 (perma): linux: update to linux-4.14.30
  
• Include [env] PR:2599 (perma): brcmfmac_sdio-firmware-rpi: update to brcmfmac_sdio-firmware-rpi-18d7c93
  
• Include [env] PR:2607 (perma): meson: update to 0.45
  
• Include [env] PR:2615 (perma): kodi: update for early April 2018
  
• Include [pkg] patch: skin.estuary: reduce system info font size (kodi)
  
• Include [pkg] PR:13274 (perma): Mode whitelist
  

1. New firmware (fix boot issues with Slice and CM)
   
2. New 4.14.30 kernel
   

1. Firmware (Mar 23):
   • firmware: platform: Partial revert for eemc clock change for slice
     
   • See: link
     
2. LibreELEC.tv:
   • moonlight: update addon (PR:2616, 3 commits, 4 files changed)
     
   • tinc: rework (PR:2613, 1 commit, 15 files changed)
     
3. XBMC:
   • fix building kodi on OSX with SDL2 installed (PR:13694, 1 commit, 1 file changed)
     
   • VideoPlayer: VAAPI - fix deep copy of VideoPicture (PR:13693, 2 commits, 3 files changed)
     
   • VideoPlayer: WinRenderBuffer - fix conditional (ternary) operator (PR:13698, 1 commit, 1 file changed)
     
   • Support plugin sources for video library with metadata.local scraper + related improvements/fixes (PR:13566, 5 commits, 24 files changed)
     
   • VAAPI: add vp9 profile 2 support (PR:13697, 1 commit, 1 file changed)
     
   • [depends] bump libnfs to 2.0.0 (PR:13684, 1 commit, 2 files changed)
     
4. pvr.dvblink:
   • pvr.dvblink addon v4.5.0 (PR:99, 2 commits, 11 files changed)
     
5. pvr.mythtv:
   • sync upstream cppmyth 2.10.1 (b14ab59)
     
   • bump version 5.7.2 (ec7daca)
     
6. Additional commits/pull requests/changes not yet merged upstream:
   • Updated: [env] PR:2585 (perma): linux: update to linux-4.14.30
     

(2018-03-26, 23:43)keny Wrote: So following the video, I wanted to select "DVB drivers from latest kernel", but no such item is shown in the add-on LibreELEC DVB Drivers. I can't try old #1206 build as it doesn't support RPi 3B+. Any idea what could be wrong?

(2018-03-27, 04:00)bhuffman Wrote: All,

I'm new to the test builds, so I'm not sure if the issue I'm seeing is known.  Can anyone tell me if this is expected behavior:

When I exit from watching a channel (live TV, Myth PVR backend), the guide never comes back and I see a black screen with 4 horizontal blurry white lines.  I can hit exit, but then the screen just goes completely black.  I can hear the sounds that tell me that the remote buttons are registering.
Also, if I'm in live TV and I hit "info", I get a dark overlay on the entire screen instead of the overlay near the bottom that display information.  Hitting "info" again will remove the overlay, but never works correctly.

If I turn on system debugging, this doesn't happen.  Things work normally.

Thank you,
Brian

(2018-03-27, 15:50)SirRob Wrote: EDIT: Nevermind I'm retarded

I'm new to test builds and having some trouble setting it up, maybe someone can help.

I created a new LibreELEC disk image to create a working system on my SD card. Booted it up and put the tar file into the "Update" folder and rebooted.
However it doesnt recognize the Update file and I'm pretty sure I dont need to extract it or anything else.

Anyone knows a mistake I could've made?

Any help much appreciated!