(2014-08-07, 18:44)dmchristenson Wrote: Do what you will with it. Admittedly I'm very much a novice at all of this. Just did what I could with it. Any improvements would be appreciated. That's why I posted it.

(2014-08-07, 16:11)bry- Wrote: @Lunatixz - was wondering if you could take another look at implementing this directly into PTVL -

python-xmltv 1.4.3 - last update on 2014-07-08 so it is actively being developed.

A Python Module for Reading and Writing XMLTV Files
https://pypi.python.org/pypi/python-xmltv/1.4.3

(2014-08-07, 19:26)Lunatixz Wrote:

(2014-08-07, 16:11)bry- Wrote: @Lunatixz - was wondering if you could take another look at implementing this directly into PTVL -

python-xmltv 1.4.3 - last update on 2014-07-08 so it is actively being developed.

A Python Module for Reading and Writing XMLTV Files
https://pypi.python.org/pypi/python-xmltv/1.4.3

I've seen this before, from my knowledge it parses XMLTV data... Which PTVL already does... what would be the benefit of adding this module?

• zap2it python-xmltv
  
• schedulesdirect - pyschedules
  

(2014-08-07, 05:51)LakersFan Wrote: Hello, I reinstalled a fresh version of PseudoTV Live (developmental version). Everything is working great except I'm having an issue with USTV Now, though. It shows up in my channel listings okay but as I click any of them, nothing happens (it's like I pushed the back button and the current movie keeps playing - it exits the channel guide).

Am I missing a step? I am using the PseudoTV Live version of USTV Now. Here's my debug log: http://pastebin.com/BFKD5PBZ


BTW, the vimeo link used in the "Recommended for autotune & Live Channels" addons section is a broken link. Just a head's up.

(2014-08-07, 21:09)amcfarla Wrote:

(2014-08-07, 05:51)LakersFan Wrote: Hello, I reinstalled a fresh version of PseudoTV Live (developmental version). Everything is working great except I'm having an issue with USTV Now, though. It shows up in my channel listings okay but as I click any of them, nothing happens (it's like I pushed the back button and the current movie keeps playing - it exits the channel guide).

Am I missing a step? I am using the PseudoTV Live version of USTV Now. Here's my debug log: http://pastebin.com/BFKD5PBZ


BTW, the vimeo link used in the "Recommended for autotune & Live Channels" addons section is a broken link. Just a head's up.

I am also having this same issue, if you select a USTV Now channel, it just stays on the channel it was before. I am using the 'USTV Now' addon in this forum at the beginning.

(2014-08-07, 19:35)ryanmcclure Wrote: @dmchristenson, here is my work so far. Here is the info overlay.

(2014-08-07, 20:23)bry- Wrote:

(2014-08-07, 19:26)Lunatixz Wrote:

(2014-08-07, 16:11)bry- Wrote: @Lunatixz - was wondering if you could take another look at implementing this directly into PTVL -

python-xmltv 1.4.3 - last update on 2014-07-08 so it is actively being developed.

A Python Module for Reading and Writing XMLTV Files
https://pypi.python.org/pypi/python-xmltv/1.4.3

I've seen this before, from my knowledge it parses XMLTV data... Which PTVL already does... what would be the benefit of adding this module?

Ah I was thinking that PTVL could eventually handle all xmltv data with a python wrapper. I did some googling and found that there is 1 for zap2it and one for schedules direct.

• zap2it python-xmltv
  
• schedulesdirect - pyschedules
  

Add an option to control the amount of data being pulled into the xmltv file and limit complaints of slow loading/scanning times perhaps. (thinking out loud) of course.

(2014-08-07, 21:25)ryanmcclure Wrote:

(2014-08-07, 21:09)amcfarla Wrote:

(2014-08-07, 05:51)LakersFan Wrote: Hello, I reinstalled a fresh version of PseudoTV Live (developmental version). Everything is working great except I'm having an issue with USTV Now, though. It shows up in my channel listings okay but as I click any of them, nothing happens (it's like I pushed the back button and the current movie keeps playing - it exits the channel guide).

Am I missing a step? I am using the PseudoTV Live version of USTV Now. Here's my debug log: http://pastebin.com/BFKD5PBZ


BTW, the vimeo link used in the "Recommended for autotune & Live Channels" addons section is a broken link. Just a head's up.

I am also having this same issue, if you select a USTV Now channel, it just stays on the channel it was before. I am using the 'USTV Now' addon in this forum at the beginning.

Are you able to watch streams in the actual USTVNow plugin? If not, that may be the issue.

(2014-08-07, 22:23)LakersFan Wrote:

(2014-08-07, 21:25)ryanmcclure Wrote:

(2014-08-07, 21:09)amcfarla Wrote: I am also having this same issue, if you select a USTV Now channel, it just stays on the channel it was before. I am using the 'USTV Now' addon in this forum at the beginning.

Are you able to watch streams in the actual USTVNow plugin? If not, that may be the issue.

So I tried opening the USTV Now app directly and it worked. I went back to PTVL and tried it again and my channels work now! Not sure if I needed to run the app separate for the first time or if just sitting overnight fixed it in some weird way.
However, now I'm noticing that the PTVL guide for those channels are incorrect. The guide says "The Young and the Restless" but playing is the Ellen Show. If I go back to the app, their guide is correct, stating Ellen is on. Is that something that will self correct?

(2014-08-06, 02:32)RockDawg Wrote:

(2014-08-02, 05:21)Lunatixz Wrote:

(2014-08-02, 04:25)RockDawg Wrote: I did post a log. See the link in my reply to bry-. I don't mean to be dense, but how do I download an older version on GIT?

I reviewed that log, and only see that you are using channel sharing incorrectly read post 2 for info... to download old builds, you need to click commit look through changes click the build you want then click download.

Channel sharing isn't the issue. I disabled it and I still have the problem. One thing I might not have made clear is that this problem exists without even having to actually run PTVL. I can simply open XBMC and immediately try to exit and it will just hang. If I disable or uninstall PTVL, XBMC exits without issue.

I just reverted back to 4.5 and the problem went away.

(2014-08-08, 02:38)RockDawg Wrote:

(2014-08-06, 02:32)RockDawg Wrote:

(2014-08-02, 05:21)Lunatixz Wrote: I reviewed that log, and only see that you are using channel sharing incorrectly read post 2 for info... to download old builds, you need to click commit look through changes click the build you want then click download.

Channel sharing isn't the issue. I disabled it and I still have the problem. One thing I might not have made clear is that this problem exists without even having to actually run PTVL. I can simply open XBMC and immediately try to exit and it will just hang. If I disable or uninstall PTVL, XBMC exits without issue.

I just reverted back to 4.5 and the problem went away.

What is your take on this Lunatixz?

(2014-07-29, 22:45)Estate Wrote:

(2014-07-24, 19:04)rosencrantz247 Wrote:

(2014-07-24, 17:23)Estate Wrote: Hi there,

I just set this up in my XBMC and love it. Thank so much!

I did search for this question, my apologies if it has been answered somewhere, I could not find a solution.

I control XBMC using the Offical Android remote. The "OK" button (middle of navigation arrows) brings up the EPG the first time I click it when I open Pseudo TV Live.
However any actions after that, XBMC seems to take over in playback mode so clicking the "OK" button just performs the standard action of giving me details of whats playing. Is there a way I can fix this or map keys differently so that I can get back to the EPG again?

Many thanks.

i changed skins and it seemed to fix my issue. im running on ubuntu, though

Thank you.

I was running Amber skin. Sad to see it go but indeed changing skins sorted out this issue.