(2014-12-28, 18:19)ARYEZ Wrote:

(2014-12-28, 07:16)Fallito Wrote: Guys, I up and running on Helix, just got a problem. F.T.V. is giving me a script fail. Have you xperiencing same problems?

I actually just upgraded to Helix and PTVL 5.6d this morning before work and wasn't able to launch PTVL at all (got script failed errors right off the bat after the update)

As a quick fix, I downgraded PTVL back to stable-master 5.6 and that version seems to work fine on Helix.

I didnt have time to post a log before I had to leave, but I'll do that when I get home.

(2014-12-30, 02:06)CpTHOOK Wrote: Hello Forum..

I want to say thank you for this XBMC Add-On.. I've got it working and it's quite arguably, THE BEST ADD-ON for XBMC. That being said, I want to point out that I have not been able to get this Add-On to work with the new Helix Kodi update. To be more specific; with Helix installed, I cannot get channels to load through Auto tune on either of my HTPC's. If interested, the specs of my machines are referenced in my sig. So, to get the add-on working I had to restore both of my machines back to XBMC Gotham stable. I have not had time to do much reading or troubleshooting yet, but I have read a bit and saw that some users are stating PTVL is not yet supported on Helix. No matter, as I'm coming from XBMC 11 Eden hesitant to upgrade because I have been a regular user of the OG PsuedoTV add-on.. Any comments or information on how to get PTVL to work on Helix would be greatly appreciated!!

(2014-12-30, 02:41)Kalebbroo Wrote: Did you install all of the dependencies found on page 1?

(2014-12-30, 02:41)Kalebbroo Wrote: What media are you trying to autotune?

(2014-12-30, 02:41)Kalebbroo Wrote: What errors are you getting?

(2014-12-30, 02:41)Kalebbroo Wrote: Post a log?

(2014-12-28, 04:47)Marshall Wrote:

(2014-12-28, 04:36)Fallito Wrote: For that kind of problem, I always have my settings2.xml openned in SublimeText (it is an editor) and also backup daily the file in DropBox (today file is settings2Dic27.xml) jaja! I am always covered, you shall too!!

(2014-12-27, 22:26)Marshall Wrote: Yeah... I'm not totally sure how PTVL works with that file, but *I think* the problem might be it reads it all into memory and if something goes wrong before it gets to dump the channels from memory back to the configuration file you end up with a blank or messed up configuration.

It sure would be nice if you could restore that file from the PTVL settings. That would be a nice feature... a button that says restore my channels from settings2.BAK and maybe even an option to select the path to settings2.BAK

(2014-12-30, 16:39)ThorC1138 Wrote: Speaking of PTVL skins, I've been working on some decent EPG channel icons for my custom playlists, they're sized at 270 x 83 to fit nicely with Tromy's Titian skins, you can find them here if there are any to folks' tastes..

https://drive.google.com/open?id=0B-TbktFkqL06LW9DS3NZM1VTRUU&authuser=0

(2014-12-30, 16:47)tromy Wrote:

(2014-12-30, 16:39)ThorC1138 Wrote: Speaking of PTVL skins, I've been working on some decent EPG channel icons for my custom playlists, they're sized at 270 x 83 to fit nicely with Tromy's Titian skins, you can find them here if there are any to folks' tastes..

https://drive.google.com/open?id=0B-TbktFkqL06LW9DS3NZM1VTRUU&authuser=0

Nice work! @ThorC1138
As for the custom skins there will be an update soon!

(2014-12-31, 01:41)lzep Wrote: I'm on 0.5.6 and Force Channel Reset isn't working for me. Anyway to figure out why? I select it and hit OK then go back and start PTVL and it flies through all the channels without resetting and starts up (with the short intro video)

(2014-12-31, 17:09)pc1975 Wrote: Unfortunately, I have to second that.

After the auto-update to 0.5.7 this morning, I'm getting "script failed!: PseudoTV Live".

I tried several things in attempt to fix this error myself; none of which worked to resolve the problem.

What I tried:

1. Rebooting the machine.

2. Clearing the cache through addon settings, restarting.

3. Uninstalling the addon, and reinstalling via TVAddons addon installer.

4. Deleting the addon, and addon data, and reinstalling via the TVAddons addon installer.

None of these woked to get the addon up and running. This system is an X86 install of Openelec.

I tried on a different beefier system, Windows version, and experienced the same problems.

Below are the log files for each system, please advise, and let me know if you need any further information.


Windows Log
http://xbmclogs.com/show.php?id=388557

OpenElec Log
http://xbmclogs.com/show.php?id=388561

Thank you, and keep up the great work!
-Patrick

(2014-12-31, 17:16)mrpcpro Wrote:

(2014-12-31, 17:09)pc1975 Wrote: Unfortunately, I have to second that.

After the auto-update to 0.5.7 this morning, I'm getting "script failed!: PseudoTV Live".

I tried several things in attempt to fix this error myself; none of which worked to resolve the problem.

What I tried:

1. Rebooting the machine.

2. Clearing the cache through addon settings, restarting.

3. Uninstalling the addon, and reinstalling via TVAddons addon installer.

4. Deleting the addon, and addon data, and reinstalling via the TVAddons addon installer.

None of these woked to get the addon up and running. This system is an X86 install of Openelec.

I tried on a different beefier system, Windows version, and experienced the same problems.

Below are the log files for each system, please advise, and let me know if you need any further information.


Windows Log
http://xbmclogs.com/show.php?id=388557

OpenElec Log
http://xbmclogs.com/show.php?id=388561

Thank you, and keep up the great work!
-Patrick

glad it's not just me LOL. I've tried everything