OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111) +---- Forum: Raspberry Pi (https://forum.kodi.tv/forumdisplay.php?fid=166) +---- Thread: OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 (/showthread.php?tid=224025) |
RE: OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 - doveman2 - 2015-06-02 (2015-06-02, 18:38)Milhouse Wrote: You should speak to the AppTV maintainer about those "Window Translator:" errors, though. Will do, although I know in the past he's only been interested in updating the skin to be compliant with stable releases, so he might not be willing to update it to fix errors related to testbuilds. EDIT: It seems one of the bugs with TVheadend has been fixed and now it's possible to toggle between fullscreen and the EPG (previously this would cause the video to freeze and repeatedly buffer). I did run into a serious bug when switching channel with the up/down buttons. First change it was OK, second change the video froze on the previous channel, I had audio from the new channel and everything else was locked up and I had to hard reboot in the end. I also found that the playback was very stuttery when starting and I saw errors up to 2800% on the bottom (S) sound line of the overlay. It settled down after a while but re-occured when changing channel. Log too big to paste so uploaded: https://drive.google.com/file/d/0B1fDI89phEESNFZEeWRoX1B2T28/view?usp=sharing Thread for channel change lockup created here: http://forum.kodi.tv/showthread.php?tid=228596 RE: OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 - popcornmix - 2015-06-02 At the end of the log: Code: 17:41:52 770.172180 T:1563419712 ERROR: AddOnLog: Tvheadend HTSP Client: pvr.hts - Command hello failed: No response received RE: OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 - Milhouse - 2015-06-03 New OpenELEC Isengard build #0602: RPi / RPi2 (Supercedes previous build) Code: # uname -a Based on tip of OpenELEC master (b301e0ab, changelog) and tip of XBMC master (6ce1b4df, changelog) with the following modifications:
RE: OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 - Caramba69 - 2015-06-03 Is there still a chance that 3D isos will be supported? RE: OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 - MukiDA - 2015-06-03 (2015-06-03, 08:30)Caramba69 Wrote: Is there still a chance that 3D isos will be supported? I think they're working on it. SSIF support is currently being worked on. It was up and running a few days ago, but it seemed to cause some issues with MVC playback, so it was reverted and pushed back a bit. I figure once they add SSIF support, ISO playback shouldn't be very far away (fingers crossed). RE: OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 - nikc0069 - 2015-06-03 Iso AND HEVC 1080p? Is there anything this Pi can't do? RE: OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 - da-anda - 2015-06-03 (2015-06-03, 11:00)nikc0069 Wrote: Iso AND HEVC 1080p? Is there anything this Pi can't do?actually no, it can even voice control your microwave https://www.raspberrypi.org/the-raspberry-pi-microwave/ As for HEVC - 1080p might only work for looooow bitrate stuff. I just tested a 720p rip I did for fun yesterday and it's not running smooth yet when bitrate is going up a bit. RE: OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 - sunstealer - 2015-06-03 Firstly - thank you to Milhouse, popcornmix and Team Kodi very much for all your hard work on this. I have been installing the test builds for a while now with great success so far. There is one problem I have encountered with these builds that I have not been able to figure out - it has been present for all the Kodi 15 builds that I have tried. Setup: RPi model B -> HDMI -> Sony AV Amp -> Samsung TV with Logitech Harmony remote. Problem: switching off TV & Amp at night with remote and leaving RPi / Kodi running. In the morning, switch on - RPi still responds to ssh and is 'alive' but TV says "no signal". Screensaver has been disabled. Kodi remote on ios device has active connection but pressing buttons does not wake up HDMI signal. Starting a movie from remote does wake up HDMI signal and then returning to GUI does work. It seems to me that something is switching off the HDMI out and it is not waking up properly when using the remote - is there a power saving feature now? Power off and then on straight away is no problem so the problem seemingly only occurs after a long period of no activity. I had to teach my missus how to ssh into the RPi and 'killall -9 kodi.bin'!! Would be good to have a solution with a higher WAF! ;-) Current build #601. Hope this is enough info and thanks for any advice. PS - the standard "Power saving" feature settings are at their default settings i.e. "Shutdown function timer"=Off, "Shutdown function"="Shutdown" RE: OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 - popcornmix - 2015-06-03 (2015-06-03, 12:31)sunstealer Wrote: There is one problem I have encountered with these builds that I have not been able to figure out - it has been present for all the Kodi 15 builds that I have tried. No immediate idea, but we can perhaps narrow things down. Add to config.txt Code: hdmi_force_hotplug=1 and reboot, and see if it still occurs. That should mean the Pi is completely unaware of any power state changes of receiver/TV. RE: OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 - Milhouse - 2015-06-03 (2015-06-03, 12:31)sunstealer Wrote: There is one problem I have encountered with these builds that I have not been able to figure out - it has been present for all the Kodi 15 builds that I have tried. Is it like this with the official OpenELEC 5.95.1 Beta? If it's not a problem specific to the test builds you'd be better off discussing it in a separate thread where you can provide debug logs and all the information needed to diagnose this problem. RE: OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 - sunstealer - 2015-06-03 (2015-06-03, 12:48)popcornmix Wrote: No immediate idea, but we can perhaps narrow things down. Add to config.txt Brilliant - thanks for the super speedy reply - I have made the changes but will probably need to wait until tomorrow to find out if it works - will check back in and let you know. I have high hopes for this solution as it makes perfect sense - I suspect, as you do, that the RPi is somehow failing to detect that the HDMI connection has been reactivated after it has gone into some sort of 'sleep' mode - probably something about the Sony Amp switching the HDMI connection to the TV is interfering but I have insufficient knowledge of HDMI, so I'm just guessing. Many thanks RE: OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 - sunstealer - 2015-06-03 (2015-06-03, 12:56)Milhouse Wrote: Is it like this with the official OpenELEC 5.95.1 Beta? You guys are Fast! Thank you and fair comment - TBH I don't know the answer because I only installed the official Kodi 15 build for a short time before I discovered yours - yours had lots of cool new features / fixes, so I switched before I would have known that this problem existed. All I can say is that I ran 5.95 for 2 days and didn't see the problem but it's entirely possible that it was there and I missed it. I'm going to see if popcornmix's solution works then if it would be helpful, I can revert to 5.95.1 beta and test more thoroughly - then post into the main thread. Either way, your help here is much appreciated - thanks RE: OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 - zmelkoow - 2015-06-03 Hi! Regarding the CEC problems - my setup is completely the same as sunstealer's. I am experiencing another problem. After switching Sony AVR to another HDMI input (SAT) and then after a while switching back to RPi input AVR and television go to standby and I have to turn them on manually. It wasn't happening in #0524 and probably #0526 release, I noticed it in #0531 release. RE: OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 - popcornmix - 2015-06-03 (2015-06-03, 13:50)zmelkoow Wrote: Regarding the CEC problems - my setup is completely the same as sunstealer's. I am experiencing another problem. After switching Sony AVR to another HDMI input (SAT) and then after a while switching back to RPi input AVR and television go to standby and I have to turn them on manually. It wasn't happening in #0524 and probably #0526 release, I noticed it in #0531 release. if it is a regression then identifying the exact build that introduced the problem would be useful. RE: OpenELEC Testbuilds for RaspberryPi (Kodi 15.0) Part 2 - Forage - 2015-06-03 (2015-05-30, 14:57)Forage Wrote: I love the following stuff in case you are still looking for improving the list: (2015-05-30, 17:17)popcornmix Wrote: Note: on Pi1/Pi2 you can handle about 1000 cycles worth of work per pixel and have a decent framerate.Many thanks for the guide. It helps now that you made it as an add-on as well. Funny how only the ugliest one from the list (number 2) actually works and the rest is just too heavy for a RPi Now that it's an add-on, is there a way to add and remove items from the list instead of having to replace existing ones? I didn't find a config file which includes the list with the names, but just in case I overlooked something. Not that it's a big deal, it's just for playing, I was just wondering. |