Transcoding Support TVHeadend - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: PVR & Live TV Support (https://forum.kodi.tv/forumdisplay.php?fid=167) +---- Forum: Tvheadend (https://forum.kodi.tv/forumdisplay.php?fid=168) +---- Thread: Transcoding Support TVHeadend (/showthread.php?tid=132506) |
RE: Transcoding Support TVHeadend - illiac4 - 2015-01-22 I'd also like to know that. TNX RE: Transcoding Support TVHeadend - bema - 2015-01-23 From https://tvheadend.org/projects/tvheadend/wiki/Building do: git clone https://github.com/tvheadend/tvheadend.git From this thread do: AUTOBUILD_CONFIGURE_EXTRA=--enable-libffmpeg_static ./Autobuild.sh -t <target> Read about target here: https://tvheadend.org/projects/tvheadend/wiki/Packaging Then install the package. RE: Transcoding Support TVHeadend - illiac4 - 2015-01-24 I have compiled them like you said and there are still no options for selecting streams and the size of transcoding streams. There are just three stream profiles and that is it. RE: Transcoding Support TVHeadend - negge - 2015-01-24 @illiac4 try with a clean profile (rename .hts/tvheadend temporarily) and see if they get generated, if not then you either didn't build correctly or you didn't install the generated packages or something. RE: Transcoding Support TVHeadend - woot2133 - 2015-01-25 I only had htsp, mastroska and pass at first. I've done a "./configure --prefix=/var/local/tvh-master--disable-v4l --enable-libffmpeg_static; make; make install" and now I have 3 more: webtv-h264-aac-matroska webtv-h264-aac-mpegts webtv-vp8-vorbis-webm Still less than ThiasDe shown in his printscreen. I tried all 3 of them and playback is extremely bad, with lots of errors and stuttering. Client is Rpi running Openelec 5.0 (Kodi Helix) with pvr.tvh 0.9.8 - I doubt there's any setting to be done on the client side, right? RE: Transcoding Support TVHeadend - illiac4 - 2015-01-25 (2015-01-24, 23:42)negge Wrote: @illiac4 try with a clean profile (rename .hts/tvheadend temporarily) and see if they get generated, if not then you either didn't build correctly or you didn't install the generated packages or something. I did this: Code: # Building Also created clean profile and still no options. RE: Transcoding Support TVHeadend - negge - 2015-01-25 Do you see it building ffmpeg when you run "make"? RE: Transcoding Support TVHeadend - negge - 2015-01-25 Quote:sudo make install That's probably your problem, you should never run "sudo make install" if you're going to use the .deb archives. Uninstall all .deb archives then run "sudo make uninstall", then run "make clean" and just the Autobuild.sh command again (no ./configure and make at all). RE: Transcoding Support TVHeadend - illiac4 - 2015-02-01 TNX have tried now with --enable-libffmpeg_static and the stream options are there now. Also it works the transcoding on my 1037u very good for live tv. One thing: how can i define the stream on other xbmc to use the stream with the transcoding profile or. how is it possible to use that transcoding profile on other machine? I have tested it with built in tvheadend player over web interface. tnx RE: Transcoding Support TVHeadend - woot2133 - 2015-02-01 (2015-02-01, 15:44)illiac4 Wrote: TNX have tried now with --enable-libffmpeg_static and the stream options are there now. Also it works the transcoding on my 1037u very good for live tv. What stream options do you have? Please post a print screen. I've done the .deb steps and I still got only 3 extra options, all of them crashing tvheadend when I start the stream on kodi. EDIT nvm I've disabled all default streams and added another one with matroska mkv built-in container, libvpx VP8 video codec and mp2 audio codec and traffic has dropped from 200-300kbytes/s to 20-40kbytes/sec. That's exactly what I was aiming for. But video on Kodi or TVHClient (android) still stutter, certainly can't be a traffic problem anymore. So playback stops for 10-20 seconds, like it would be buffering, and then plays for a few seconds, again stops.. /doing these tests over WAN/ RE: Transcoding Support TVHeadend - illiac4 - 2015-02-02 Well it depends of the server side. It it does not have enough horsepower then it will lag every few seconds. If you check it with top command you will see how much cpu is used. Also wan is the other thing to check. You can do that with speedtest site. RE: Transcoding Support TVHeadend - phoniclynx - 2015-03-06 Has anybody has any success in getting a RPi2 to transcode and stream through a VPN or normal WiFi? I can get it to stream to my phone (using Kodi) through HTSP perfectly fine.. but as soon as I try playing with the settings in the transcode.. I get jumpy buffering even on the normal WiFi network. RE: Transcoding Support TVHeadend - negge - 2015-03-06 A Raspberry Pi most definitely doesn't have enough power to do any transcoding, especially not over a VPN. RE: Transcoding Support TVHeadend - phoniclynx - 2015-03-07 are you talking about the RPi or the RPi2 ? RE: Transcoding Support TVHeadend - negge - 2015-03-07 Both. |