(2012-10-16, 19:56)fritsch Wrote: On popular request by guilmxm

Zotac AD-10 Internal remote.

Everything is no problem at all with the build in lirc:

Code:

sudo apt-get install lirc

replace the following files

Code:

# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="zboxremote"
REMOTE_MODULES=""
REMOTE_DRIVER=""
REMOTE_DEVICE=""
REMOTE_SOCKET=""
REMOTE_LIRCD_CONF=""
REMOTE_LIRCD_ARGS=""

#Chosen IR Transmitter
TRANSMITTER="SIR IrDA (built-in IR ports)"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE="/dev/lirc0"
TRANSMITTER_SOCKET=""
TRANSMITTER_LIRCD_CONF=""
TRANSMITTER_LIRCD_ARGS=""

#Enable lircd
START_LIRCD="true"

#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"

#Try to load appropriate kernel modules
LOAD_MODULES="true"

# Default configuration files for your hardware if any
LIRCMD_CONF=""

FORCE_NONINTERACTIVE_RECONFIGURATION="false"
START_LIRCMD=""

lircd.conf

Code:

# /etc/lirc/lircd.conf
begin remote

  name  zboxremote
  bits            8
  flags RC6|CONST_LENGTH
  eps            30
  aeps          100

  header       2672   851
  one           457   425
  zero          457   425
  pre_data_bits   29
  pre_data       0x37FCB7B
  gap          106237
  toggle_bit_mask 0x8000
  rc6_mask    0x100000000

      begin codes
          KEY_SLEEP                0xC2
          KEY_WAKEUP               0x71
          KEY_RECORD               0xC8
          KEY_PAUSE                0xCF
          KEY_STOP                 0xCE
          KEY_REWIND               0xD6
          KEY_PLAY                 0xD3
          KEY_FASTFORWARD          0xD7
          KEY_PREVIOUS             0xDE
          KEY_NEXT                 0xDF
          KEY_BACK                 0x7C
          KEY_INFO                 0x34
          KEY_HOME                 0xA2
          KEY_UP                   0xA7
          KEY_DOWN                 0xA6
          KEY_LEFT                 0xA5
          KEY_RIGHT                0xA4
          KEY_OK                   0xA3
          KEY_VOLUMEDOWN           0xEE
          KEY_VOLUMEUP             0xEF
          KEY_MUTE                 0xF2
          KEY_CHANNELDOWN          0xE0
          KEY_CHANNELUP            0xE1
          KEY_1                    0xFE
          KEY_2                    0xFD
          KEY_3                    0xFC
          KEY_4                    0xFB
          KEY_5                    0xFA
          KEY_6                    0xF9
          KEY_7                    0xF8
          KEY_8                    0xF7
          KEY_9                    0xF6
          KEY_0                    0xFF
          KEY_KPASTERISK           0xCC
          KEY_KPSLASH              0xCD
          KEY_CLEAR                0xC5
          KEY_TEXT                 0xD0
          KEY_EPG                  0xC1
          KEY_ENTER                0xCB
          KEY_RED                  0x92
          KEY_GREEN                0x91
          KEY_YELLOW               0x90
          KEY_BLUE                 0x8F
      end codes

end remote

Some remappings for xbmc:
/home/xbmc/.xbmc/userdata/Lircmap.xml

Code:

<lircmap>
    <remote device="zboxremote">
        <left>KEY_LEFT</left>
        <right>KEY_RIGHT</right>
        <up>KEY_UP</up>
        <down>KEY_DOWN</down>
        <select>KEY_OK</select>
        <start>KEY_HOME</start>
        <back>KEY_BACK</back>
        <record>KEY_RECORD</record>
        <play>KEY_PLAY</play>
        <pause>KEY_PAUSE</pause>
        <stop>KEY_STOP</stop>
        <forward>KEY_FORWARD</forward>
        <reverse>KEY_REWIND</reverse>
        <volumeplus>KEY_VOLUMEUP</volumeplus>
        <volumeminus>KEY_VOLUMEDOWN</volumeminus>
        <pageplus>KEY_CHANNELUP</pageplus>
        <pageminus>KEY_CHANNELDOWN</pageminus>
        <skipplus>KEY_NEXT</skipplus>
        <skipminus>KEY_AGAIN</skipminus>
        <mute>KEY_MUTE</mute>
        <power>KEY_SLEEP</power>
        <myvideo>KEY_VIDEO</myvideo>
        <mymusic>KEY_AUDIO</mymusic>
        <mytv>LiveTV</mytv>
        <one>KEY_1</one>
        <two>KEY_2</two>
        <three>KEY_3</three>
        <four>KEY_4</four>
        <five>KEY_5</five>
        <six>KEY_6</six>
        <seven>KEY_7</seven>
        <eight>KEY_8</eight>
        <nine>KEY_9</nine>
        <zero>KEY_0</zero>
        <red>KEY_RED</red>
        <green>KEY_GREEN</green>
        <yellow>KEY_YELLOW</yellow>
        <blue>KEY_BLUE</blue>
        <menu>KEY_DVD</menu>
        <clear>KEY_CLEAR</clear>
        <enter>KEY_ENTER</enter>
        <star>KEY_KPASTERISK</star>
        <hash>KEY_KPSLASH</hash>
        <title>KEY_WAKEUP</title>
        <teletext>KEY_TEXT</teletext>
        <guide>KEY_EPG</guide>
        <info>KEY_INFO</info>
    </remote>
</lircmap>

And some additional remaps as I like them.
/home/xbmc/.xbmc/userdata/keymaps/remap.xml

Code:

<keymap>
  <global>
    <remote>
      <power>ActivateWindow(ShutdownMenu)</power>
      <info>ContextMenu</info>
      <record>XBMC.ActivateWindowAndFocus(MyPVR, 34,0, 13,0)</record>
    </remote>
  </global>
  <fullscreenvideo>
      <remote>
           <info>CodecInfo</info>
       <back>Back</back>
           <select>OSD</select>
      </remote>
  </fullscreenvideo>
</keymap>