HDHR Prime Tutorial - Where's my mistake? - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: PVR & Live TV Support (https://forum.kodi.tv/forumdisplay.php?fid=167) +---- Forum: Tvheadend (https://forum.kodi.tv/forumdisplay.php?fid=168) +---- Thread: HDHR Prime Tutorial - Where's my mistake? (/showthread.php?tid=152630) |
HDHR Prime Tutorial - Where's my mistake? - Busenheimer - 2013-01-19 I had TVH 3.2 working with my Prime and a Comcast Motorola Cable Card. It was running on LinuxMint 13. I had only network stations showing up, but all the functionality was there. I thought I figured out how to get the encrypted channels to show ( had to use 3.3 and a patch dvbhdhomerun) up so I thought I would install Lubuntu 12.10 on a Virtural Box, document everything and post a tutorial since there doesn't seem to be one. I can't get anything to show up and I can't figure out where I'm going wrong. Here is the full tutorial - can you help me point out my mistake? OS: Lubuntu 12.10 Cable: Comcast w/ Motorola Cable Card Software: TV Headend 3.3.152 XBMC: Openelec RC1 (XBMC RC3) I didn't come up w/ all this on my own, it's cobbled together from various forums and IRC chats with the HTS team GET PPA'S FOR INSTALL TVHeadend Code: sudo add-apt-repository ppa:adamsutton/tvheadend-unstable dvbhdhomerun Code: sudo add-apt-repository ppa:tfylliv/dvbhdhomerun Update Sources Code: sudo apt-get update if you want to be able to view premium/encrypted channels you will need to build dvbhdhomrun from source with the included descrambler patch For info on the patch see here INSTALL HDHOMERUN SOFTWARE Code: sudo apt-get install hdhomerun-config hdhomerun-config-gui Make sure your Prime is discoverable Code: hdhomerun_config discover Your output should look like this with a different IP and device number of course: hdhomerun device 1316952D found at 10.0.1.204 Take note of your device ID, you'll need this later on. INSTALL AND CONFIGURE DVBHDHOMERUN Code: sudo apt-get install dvbhdhomerun-dkms dvbhdhomerun-utils Service should be started now. If it isn't, start it manually Code: sudo service dvbhdhomerun-utils start Set the kernel module to start at boot Code: sudo echo dvb_hdhomerun >> /etc/modules Alternatives: If this doesn't work there are two work arounds. 1) Use Nano: Code: sudo nano /etc/modules 2) Enter into superuser Code: # su - This worked in Mint 13. For Ubuntu Root access is locked by default so this won't work. To enable su see this Configure dvbhdhomerun to see your tuners. This is used if auto discovery doesn't work (I think ) Code: sudo nano /etc/dvbhdhomerun Change your config file so that the adaptors look like this (use your device ID in place of 1316952D): [1316952D-0] tuner_type=ATSC [1316952D-1] tuner_type=ATSC [1316952D-2] tuner_type=ATSC Reboot Code: sudo reboot Rebuild kernel modules Code: sudo dpkg-reconfigure dvbhdhomerun-dkms RESTART THE HELPERS HDHomeRun Prime Code: sudo userhdhomerun -f dvbhdhomerun Code: sudo service dvbhdhomerun-utils start VERIFY UNIQUE TSID'S ARE PRESENT We need to verify that your cable provider is supplying unique TSID's for the Muxes. If not then this won't work for you. Replace your 1316952D with your device ID Code: hdhomerun_config 1316952D scan 0 ~/scan0.txt You should see something like this Notice the TSID (0x81A1, 0x81C5, etc...) If you are seeing all zeros, or 0x0000 then you are not getting unique TSID's When the scan is done we will create a custom DVB location file for TVH to scan. Name your file in the format (country-STATE-Town) Code: awk '{if ($1 ~ /SCANNING/) print "\n" $2; else print $0}' scan0.txt | awk 'BEGIN { RS = "" ; FS = "\n" } { if (length($4) > 0) print "A " $1 " qam256" }' >us-IL-Peoria When done your custom DVB file should look something like this: A 849000000 qam256 A 843000000 qam256 A 837000000 qam256 A 813000000 qam256 A 807000000 qam256 A 771000000 qam256 A 765000000 qam256 A 759000000 qam256 A 753000000 qam256 A 747000000 qam256 Move the file to the proper location Code: sudo mv us-IL-Peoria /usr/share/tvheadend/data/dvb-scan/atsc/us-IL-Peoria I noticed the other DVB files that come with TVH actually had QAM256, not qam256. You can change it in print section of the command, I'm not sure it makes a difference. CONFIGURE ADAPTERS Start/Restart TVHeadend Code: sudo service tvheadend restart Open a web browser and go to http://tvheadendIP:9981 Since I'm on the same machine as my server it's just http://localhost:9981 Go to Configuration --> TV Adapters From the drop down you should have three tuners present. If they are not showing up restart your helpers and then restart TVH. Select "Add DVB Network by Location" Pick your custom file you just made Check autodetect muxes Turn off full mux reception. Hit save. You should now see muxes showing up, and starting to scan. If it finds services they will show up in the services tab. So at this point all of my muxes show up, but no services. The only thing left to do is to add the EPG data from schedules direct, and map the services to channels. If you have services showing up then lets add EPG data for you Go here and register for an account You have to run this as user hts, so lets change users Code: sudo su - hts Run the schedule grab Code: sudo /usr/bin/tv_grab_na_dd --configure Enter your schedules direct username and password, and follow the prompts. Next go into tvheadend via your browser and navigate to the EPG Grabber section. Select schedules direct via the drop down menu and save. Next go back to Configuration --> TV Adapters and click on map DVB services to channels. I'll clean up this last part later, I know it's kind of rough. Any ideas why my services aren't showing up? RE: HDHR Prime Tutorial - Where's my mistake? - tfylliv - 2013-01-20 (2013-01-19, 06:33)Busenheimer Wrote: Set the kernel module to start at boot Just a minor note, you don't need to put the kernel module in /etc/modules. When you start the dvbhdhomerun-utils service it will load the kernel module as the first thing (see /etc/init/dvbhdhomerun-utils.conf) RE: HDHR Prime Tutorial - Where's my mistake? - Dilligaf - 2013-01-20 What is your problem? Do you see thr HDHomerun in TVH config? If not it's probably a timing issue, dvbhdhomerun needs to complete its thing before TVH launches, easiest way to do this is to delete the dvbhdhomerun launch script in init or init.d and add the dvbhdhomerun launch command to the TVH launch script then a sleep 5, something like this Code: pre-start script also check /var/log/dvbhdhomerun.log for errors HDHR Prime Tutorial - Where's my mistake? - Busenheimer - 2013-01-20 I can see my tuners and scan the muxes. My problem is I don't have any services. RE: HDHR Prime Tutorial - Where's my mistake? - Dilligaf - 2013-01-20 (2013-01-20, 20:35)Busenheimer Wrote: I can see my tuners and scan the muxes. My problem is I don't have any services. Sounds like maybe the hacked dvbhdhomerun isn't working, can you see services if you use the regular dvbhdhomerun? Have you checked the dvbhdhomerun log? is there a read error at the bottom? I experienced similar problems when the kernel module and the userspace portion has mismatched versions |