(2014-04-06, 16:25)miappa Wrote: Updated Gotham build, XBMC master from Apr 06 + newclock3 commits + one additional commit.
Note: Last commit in nc3 (by Fernetenta) not included since I compiled before it was added.

Some info:
• Master: Many fixes and updates (changelog)
• NC3: Ability to choose different scaling kernels (more info here)
• NC3: Only extract thumbnails and video info from real video stream
• NC3: Don't replace timestamps of 0 with unknown (fix stall when seeking back to zero)
• Additional: WMC PVR addon V 0.2.95 included

Firmware from April 06 included:
• Fix for crash after jpeg encode with non-multiple of 16 height (fixes crash/freeze in previous build)
• Many updates and firmware in firmware from April 04

Additional info and testing (DVDPlayer etc.), see post #1

To install XBMC build, SSH to Pi:

Code:

wget -O xbmc-13-20140406-nc3.tar.gz http://goo.gl/05SVd0 --no-check-certificate
pv xbmc-13-20140406-nc3.tar.gz | tar xzf - -C /home/pi/.upgrade
sudo cp /home/pi/.upgrade/xbmc-13-20140406-nc3/{fixup_x.dat,start_x.elf} /boot
ln -sfn /home/pi/.upgrade/xbmc-13-20140406-nc3/xbmc-bcm /home/pi/.xbmc-current
sudo reboot

(2014-04-07, 11:15)Mafarricos Wrote: Is the update of library bug solved in this version?

(2014-04-07, 11:15)Mafarricos Wrote: I got bootloop, but I don't know if was related to this.

(2014-04-07, 11:51)miappa Wrote:

(2014-04-07, 11:15)Mafarricos Wrote: Is the update of library bug solved in this version?

Did you mean the crash/freeze due to jpeg encoding / memory corruption?
If so yes, it´s been fixed with updated firmware.

(2014-04-07, 11:15)Mafarricos Wrote: I got bootloop, but I don't know if was related to this.

That will happen if the symlink is "empty" or not pointing correct.
Can happen for several reasons, for example if you have an error when doing the commands (i.e wrong directory, the tarball was not downloaded or unpacked correct etc.)
But you do not need to reinstall any builds you already have if all you want is to switch.
For example, if you already have April 2 installed since before, you can just create the symlink by:

Code:

ln -sfn /home/pi/.upgrade/xbmc-13-20140402-nc3/xbmc-bcm /home/pi/.xbmc-current

And of course, same goes if you do have April 6 installed but for some reason the symlink is wrong.

(2014-04-07, 11:55)ismadder Wrote: Every time i update to the lastest test build i lose ssh, i am doing something wrong?

(2014-04-07, 11:55)ismadder Wrote: Every time i update to the lastest test build i lose ssh, i am doing something wrong?

(2014-04-06, 18:50)miappa Wrote: [..]

But, there were more deps that needed to be added, I cannot remember everything though. Libxml2 for example, but it´s probably included in Sam´s last buildroot (I don´t know).

Note: I have not tested Sam´s last buildroot from 3rd of April so I cannot say for sure that this will work if you have that one.
I know that Sam is looking into this, so if you´re not in a hurry perhaps you should just wait.

(2014-04-07, 18:46)miappa Wrote: @Mafarricos
Do you loose SSH?
And also, I don´t know NOOBS and I am uncertain that the instruction that copies firmware files will work on NOOBS.
Does it mount /boot and use it´s own boot partition?

Edit: Ok, that was a "real boot loop", I thought you meant a XBMC "restart loop". The boot loop could have been firmware related, but also NOOBS related (don´t know how it works).

@ismadder
Are you n NOOBS?

@kl1k
What do you mean? Do you loose SSH?