Kodi Community Forum
OpenELEC Testbuilds for RaspberryPi Part 2 - Printable Version

Kodi Community Forum (https://forum.kodi.tv)
+-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33)
+--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111)
+---- Forum: Raspberry Pi (https://forum.kodi.tv/forumdisplay.php?fid=166)
---- Thread: OpenELEC Testbuilds for RaspberryPi Part 2 (/showthread.php?tid=184866)



RE: OpenELEC Testbuilds for RaspberryPi Part 2 - anonimo2001 - 2014-03-06

Good morning from Spain. The same problem as ranem123 here with build #0304 (more or less). Shutdown/Reboot doesn’t work in any skin, maybe it has to do with the new “Virtual" Suspend Mode. I tried to change Shutdown function but it is not in Settings -> System -> Power Saving. Downgrading to #0301 solves the problem.
Thank you for your hard work and for making it available to all of us (I’ve been using xbmc since my old Xbox…)
Regards


RE: OpenELEC Testbuilds for RaspberryPi Part 2 - delinend - 2014-03-06

Tested #0304

I'm missing HDMI signal after 5-10sec. playback (omxplayer)...
Can't Shutdown or Reboot from menu.

Best regards.


RE: OpenELEC Testbuilds for RaspberryPi Part 2 - Doktor-X - 2014-03-06

(2014-03-05, 15:45)MilhouseVH Wrote:
(2014-03-05, 13:11)Doktor-X Wrote: New OpenELEC Gotham build: #0304 is unusable when i try to watch video hdmi port shutdown itself, and tv display no signal and then i press stop button on remote and image get back again, i thing that problem is
Support for "Virtual" Suspend Mode

You mean the HDMI shut down while you were playing a video? What are your shutdown timer settings? I haven't been able to reproduce.

all is set to off


RE: OpenELEC Testbuilds for RaspberryPi Part 2 - xbs08 - 2014-03-06

Have you tested with idle timer set to a few minutes and suspend as shutdown function?


RE: OpenELEC Testbuilds for RaspberryPi Part 2 - delinend - 2014-03-06

Hmm.. I can't Enable the FIQ_FSM patch via cmdline.txt.
Anyone other tryed ?

Here my cmdline.txt (only in one line):
boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 ssh quiet dwc_otg.fiq_enable=1
dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0x3


RE: OpenELEC Testbuilds for RaspberryPi Part 2 - anonimo2001 - 2014-03-06

How can I set the Shutdown Funcion? It's supposed to be in Settings -> System -> Power Saving but it isn't... Can I set it editing a config file?


RE: OpenELEC Testbuilds for RaspberryPi Part 2 - popcornmix - 2014-03-06

(2014-03-06, 14:12)delinend Wrote: Hmm.. I can't Enable the FIQ_FSM patch via cmdline.txt.
Anyone other tryed ?

Here my cmdline.txt (only in one line):
boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 ssh quiet dwc_otg.fiq_enable=1
dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0x3
Works for me:
Code:
# cat /flash/cmdline.txt
boot=/dev/mmcblk0p1 disk=/dev/sda1 dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0x3 ssh quiet
Code:
[    1.525382] FIQ FSM acceleration enabled for :
[    1.525382] Non-periodic Split Transactions
[    1.525382] Periodic Split Transactions
[    1.525411] dwc_otg: Microframe scheduler enabled
...
[    1.526638] dwc_otg: FIQ enabled
[    1.526649] dwc_otg: NAK holdoff enabled
[    1.526656] dwc_otg: FIQ split-transaction FSM enabled



RE: OpenELEC Testbuilds for RaspberryPi Part 2 - delinend - 2014-03-06

(2014-03-06, 16:01)popcornmix Wrote:
(2014-03-06, 14:12)delinend Wrote: Hmm.. I can't Enable the FIQ_FSM patch via cmdline.txt.
Anyone other tryed ?

Here my cmdline.txt (only in one line):
boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 ssh quiet dwc_otg.fiq_enable=1
dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0x3
Works for me:
Code:
# cat /flash/cmdline.txt
boot=/dev/mmcblk0p1 disk=/dev/sda1 dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0x3 ssh quiet
Code:
[    1.525382] FIQ FSM acceleration enabled for :
[    1.525382] Non-periodic Split Transactions
[    1.525382] Periodic Split Transactions
[    1.525411] dwc_otg: Microframe scheduler enabled
...
[    1.526638] dwc_otg: FIQ enabled
[    1.526649] dwc_otg: NAK holdoff enabled
[    1.526656] dwc_otg: FIQ split-transaction FSM enabled

Thanks Popcornmix.

It looks like, when I place the "ssh quiet" to the last in the line, it works for me :-)

Not working:
Code:
boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 ssh quiet dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0x3

Working:
Code:
boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0x3 ssh quiet



RE: OpenELEC Testbuilds for RaspberryPi Part 2 - allan87 - 2014-03-06

Same here.
Code:
boot=/dev/mmcblk0p1 disk=/dev/sda1 dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0x3 ssh quiet
Code:
dmesg | grep FSM
[    1.648804] FIQ FSM acceleration enabled for :
[    1.650983] dwc_otg: FIQ split-transaction FSM enabled

I also noticed that openelec seems to be moving ahead with this in openelec 4.0, according to this commit.


RE: OpenELEC Testbuilds for RaspberryPi Part 2 - Milhouse - 2014-03-06

It will be enabled by default in the next build.


RE: OpenELEC Testbuilds for RaspberryPi Part 2 - arnova - 2014-03-06

Recently I added:
Code:
<destroywindowcontrols>false</destroywindowcontrols>

to my advancedsettings.xml . Ever since the Dutch video addon I'm using, locks up xbmc when I try to exit it. Seems to be an RPi only problem, Linux working fine here. Anyone seen this before/understands what's going on?


RE: OpenELEC Testbuilds for RaspberryPi Part 2 - popcornmix - 2014-03-06

(2014-03-06, 17:12)arnova Wrote: Recently I added:
Code:
<destroywindowcontrols>false</destroywindowcontrols>

to my advancedsettings.xml . Ever since the Dutch video addon I'm using, locks up xbmc when I try to exit it. Seems to be an RPi only problem, Linux working fine here. Anyone seen this before/understands what's going on?

Do you get much performance benefit from disabling destroywindowcontrols? Have you measured the memory cost?
Can you attach gdb and look at the backtraces after the lockup?
Does the addon always lockup? Do you have to have played a video, or does just opening/closing it cause the problem?
Any other way of provoking the lockup (without addons)?


RE: OpenELEC Testbuilds for RaspberryPi Part 2 - arnova - 2014-03-06

(2014-03-06, 17:36)popcornmix Wrote: [quote='arnova' pid='1645052' dateline='1394118741']
Do you get much performance benefit from disabling destroywindowcontrols? Have you measured the memory cost?
I had the idea the GUI response was a little better, not sure though could be placebo effect ofc ;-) I didn't measure the memory cost (yet).

(2014-03-06, 17:12)arnova Wrote: Can you attach gdb and look at the backtraces after the lockup?
Will try. Does OpenElec come with gdb? Will have a look then as soon as I have the time (probably this weekend)

(2014-03-06, 17:12)arnova Wrote: Does the addon always lockup? Do you have to have played a video, or does just opening/closing it cause the problem?
Yes, it always locks up. Simply opening it, and closing it again without playing any video locks xbmc up (when eg. pressing menu or back). The addon window closes and after that the Confluence background appears as it would between closing the addon window and showing the main window, but there it gets stuck.

(2014-03-06, 17:12)arnova Wrote: Any other way of provoking the lockup (without addons)?
Not that I'm aware of. I've used it for a while and the video addon was the only thing that got stuck. It took me some time to figure out this was the cause.


RE: OpenELEC Testbuilds for RaspberryPi Part 2 - popcornmix - 2014-03-06

(2014-03-06, 18:47)arnova Wrote: Will try. Does OpenElec come with gdb? Will have a look then as soon as I have the time (probably this weekend)

Yes, openelec ships with gdb (and gdbserver).


RE: OpenELEC Testbuilds for RaspberryPi Part 2 - anonimo2001 - 2014-03-06

Hello. I've just received my VC-1 codec and it doesn't work with wmv3 files (yes, vcgencmd codec_enabled WVC1 says it's enabled; now I know there is a problem with them :-) ) Wich of your builds includes the modifications to see this kind of files? Dvdplayer plays sound, no video; omxplayer any of them.
Thanks


This forum uses Lukasz Tkacz MyBB addons.