(2015-06-11, 03:51)wallympls Wrote: Okay making some progress here. Now when I boot to OpenElec I get a black screen instead of Kernal not found.

I would say that may be better.

Any advice ?

My steps were:
Reflashed with recovery USB
6 gb partition
selected Chrome/Open Elec
set boot options to open elec after 30 seconds

(2015-06-11, 05:21)Matt Devo Wrote:

(2015-06-11, 04:23)sd26 Wrote: Thanks Matt. I can use wireless lan and not reboot until then.

fixed firmware uploaded, good to go

(2015-06-11, 07:41)sd26 Wrote: All working again thank you very much for your support

(2015-06-11, 08:13)Matt Devo Wrote:

(2015-06-11, 07:41)sd26 Wrote: All working again thank you very much for your support

np, sorry for the inconvenience. I try to test everything here prior to making it public, but obviously can't test every permutation, and the lack of MAC address isn't one that I normally bother with unless I change something related to it

(2015-06-11, 18:45)furii Wrote: out of curiosity, is the ability to patch the mac address back in missing from the OE version of the script because it's not possible on OE or just for lack of demand (for lack of a better word)? i'd have patched my mac address back in long ago if it had been available without needing to create and boot a live stick. not that it matters much for me now

(2015-06-11, 19:51)Matt Devo Wrote:

(2015-06-11, 18:45)furii Wrote: out of curiosity, is the ability to patch the mac address back in missing from the OE version of the script because it's not possible on OE or just for lack of demand (for lack of a better word)? i'd have patched my mac address back in long ago if it had been available without needing to create and boot a live stick. not that it matters much for me now

it's mostly a result of the OE firmware updater script being functionally limited by the lack of a bash shell in OE. Everything in that script is different/separate from the main EZ script, and I'm not a fan of having to maintain multiple scripts with similar function but different implementations

quit being lazy and just boot a live USB already

(2015-06-11, 20:06)walkerx Wrote: i've ordered asus chromebox which should arrive tomorrow and going to go for the openelec only install - on reading the instructions am i correct in thinking i will need two usb sticks for the job - one for the backup of the stock firmware/bios and one for the install media

(2015-06-11, 04:50)Matt Devo Wrote:

(2015-06-11, 04:40)pboyle Wrote: Hello, just downloaded k ubuntu dual boot set up on my chromebox, but upon initial boot I am getting
-bash: cannot create temp file for here-document: Read-only file system
I have no idea what's going on and am new to this whole thing. Is there any way to work around this? I set up ubuntu with the max recommended partition (9GB). Please help!

never seen that error before, what version and metapackage?

(2015-06-11, 20:14)pboyle Wrote: So am I out of luck here?

(2015-06-11, 20:07)Matt Devo Wrote:

(2015-06-11, 20:06)walkerx Wrote: i've ordered asus chromebox which should arrive tomorrow and going to go for the openelec only install - on reading the instructions am i correct in thinking i will need two usb sticks for the job - one for the backup of the stock firmware/bios and one for the install media

correct, though you can get away with one if you copy the firmware from USB to another PC before creating the install media (which will wipe the USB)

(2015-06-11, 20:16)Matt Devo Wrote:

(2015-06-11, 20:14)pboyle Wrote: So am I out of luck here?

retry using 14.10 (w/kubuntu-desktop), I think 15.04 still has some issues that I'd need to modify the script to work around.

(2015-06-11, 20:54)pboyle Wrote: Ok, is this going to require me to reset my chromebox to factory settings and completely start over or can I just run the script again?

(2015-06-11, 21:26)Arse4life Wrote: Hi Matt,

I looked in wiki trying to check for any troubleshooting options for my problem but not sure if I see one . I have a dual boot OE/ chrome OS w/ 30sec delay. I turned it on today and I'm just getting a black screen. I've switched hdmi cables and also tried different hdmi ports to no avail. Do you think a factory restore is necessary? Thanks in advance.