(2014-08-07, 01:51)hman333 Wrote: Any trick to getting the PS3 remote working? I have turned on BT, put remote in discovery. it shows up on the list and I click connect, it asks me for a pin and I have tried 1234 and 0000 with no luck. If I choose trust and connect it freezes up the box

Thanks

(2014-08-06, 18:06)Matt Devo Wrote:

(2014-08-06, 07:41)DocG Wrote: In case there should be any doubts...

And yes, it does work for me.

thanks for the pic

(2014-08-06, 15:58)MattBlacK85 Wrote: Hi,

I'm using the standalone setup of OpenElec, now i want to restore to stock. So i made a ChromiumOS USB stick as said in the wiki. But i'm not getting any boot menu to choose to boot the USB. Did try booting with ESC or CTRL-L and CTRL-U with no luck. Can anybody tell me to get to the boot menu? Thanks in advance

sounds like something is amiss with your ChromiumOS USB stick. You will only get the 'press ESC for boot menu' text when another bootable device is connected. CTRL-D/U are functions of the stock firmware; they have no effect on a standalone/coreboot setup

(2014-08-07, 05:11)igjunk Wrote: Out of curiosity, has anyone tried to run XBMC natively under ChromeOS on ASUS? I read multiple posts indicating that it should be possible but was curious if anyone actually tried it.

(2014-08-07, 11:07)LOLO_90 Wrote: Hello all

I have a problem during recover stock firmware

When I make step 5.3 Restoring the Stock Firmware

The I receive a message " Firmware file size doesn't match".

Whats the problem?
I want keep back my Chromebox in factory state for bring them back.

Thanks for all help.

(2014-08-07, 11:07)LOLO_90 Wrote: Hello all

I have a problem during recover stock firmware

When I make step 5.3 Restoring the Stock Firmware

The I receive a message " Firmware file size doesn't match".

Whats the problem?
I want keep back my Chromebox in factory state for bring them back.

Thanks for all help.

(2014-08-07, 17:41)LOLO_90 Wrote: Hello Matt Devo

Yes, I have the Backup from my Box wich is 8192kb and the "curl -L -o stock-firmware.bin https://dl.dropboxusercontent.com/u/98309225/firmware-panther-factory-recovery.bin"

on both I receive the message:

FAILD
Firmware doesn't match

What can I do?

To take the Openelec on the box was very easy.

I use XBMC on my Zotac and my Zenbook. Both work good but on the ASUS Chromebox it lags and have some bugs...and I think its noisy and consumes to much power.

I will test the new passiv Zotac ci320 but first I have to bring the Chromebox back.

Thanks for u help

(2014-08-07, 20:46)jjslegacy Wrote: 4.1.3 has been released I see - hopefully it helps the hardware accel lockups.

(2014-08-07, 21:00)Stereodude Wrote: Is it possible to power off the wifi and BT on the Asus Chromebox while running OpenELEC to reduce the power consumption or is it easier to just pull the card from it?

(2014-08-07, 21:54)reap705 Wrote: Hi,

got my HP Chromebox today, installed Openelec with the script and nearly everything works fine.

But I have one problem pairing my PS3 BD Remote: If I click on "Trust and connect" the box freezes or I get the message "Bluetooth Error - Host is down". Tried with Openelec 4.12 and 4.13.

(2014-08-07, 22:00)Matt Devo Wrote:

(2014-08-07, 21:54)reap705 Wrote: Hi,

got my HP Chromebox today, installed Openelec with the script and nearly everything works fine.

But I have one problem pairing my PS3 BD Remote: If I click on "Trust and connect" the box freezes or I get the message "Bluetooth Error - Host is down". Tried with Openelec 4.12 and 4.13.

cmon man, it's listed above as a known issue -- on the same page as this post.

(2014-08-07, 22:25)noggin Wrote: Has anyone posted logs and reported the bug to the OpenElec guys?