Kodi Community Forum
v17 LibreELEC Testbuilds for x86_64 (Kodi 17.0) - Printable Version

Kodi Community Forum (https://forum.kodi.tv)
+-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33)
+--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111)
+---- Forum: Linux (https://forum.kodi.tv/forumdisplay.php?fid=52)
---- Thread: v17 LibreELEC Testbuilds for x86_64 (Kodi 17.0) (/showthread.php?tid=269815)



RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - nuc-LE - 2016-05-22

After fresh install of LE on (NUC HSW I3) and upgrade to #0521 I have problems with frame being dropped. Looks like my problem has to do with 30 and 25FPS videos. All 23.976 playback seems like alot less dropped frames. Any help or suggestions are very appreciated.
Full Debug


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - greenad89 - 2016-05-22

Hey Milhouse just wondering why you stopped updating Openelec Testbuilds as of 04/15?


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - Roby77 - 2016-05-22

@Milhouse I would like to test your patch and dr hdmi without custom edid loading

Is there a command to disable/enable custom edid loading without need to format ? (Tried renaming only edid file name but kodi change res at every startup


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - Milhouse - 2016-05-22

(2016-05-22, 12:05)qp9013625 Wrote: But that is not true?

See for yourself:

https://bugs.freedesktop.org/show_bug.cgi?id=94843

Thanks, but the PR is the best place for that discussion.


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - Milhouse - 2016-05-22

(2016-05-22, 20:50)greenad89 Wrote: Hey Milhouse just wondering why you stopped updating Openelec Testbuilds as of 04/15?

I've no interest in OpenELEC now that it's forked as LibreELEC.


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - Milhouse - 2016-05-22

(2016-05-22, 22:32)Roby77 Wrote: @Milhouse I would like to test your patch and dr hdmi without custom edid loading

Is there a command to disable/enable custom edid loading without need to format ? (Tried renaming only edid file name but kodi change res at every startup

Umm... @fritsch?


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - Milhouse - 2016-05-22

New LibreELEC.tv Krypton build #0522: Generic
(Supercedes previous build)

Code:
# uname -a
Linux LibreELEC 4.6.0 #1 SMP Sun May 22 21:22:34 BST 2016 x86_64 GNU/Linux

# lsb_release
LibreELEC (Milhouse) - Version: devel-20160522212027-#0522-g0dee619 [Build #0522]

Based on tip of LibreELEC.tv master (0dee619c, changelog) and tip of XBMC master (35d26982, changelog) with the following modifications:
  • Includes FernetMenta "VideoPlayer" patches
  • Includes latest kodi-platform master (c8188d82, ahead +4)
  • Includes latest libcec master (6d68d212)
  • Includes latest libnfs master (00d9ba15, ahead +19)
  • Includes latest p8-platform master (041a8c6c, ahead +1)
  • Includes latest addons: adsp.basic (2ae604e5, +8), adsp.biquad.filters (29bfe9d8, +3), adsp.freesurround (34f50406, +7), asplib (da66f517), inputstream.mpd (3ac19c39, +11), inputstream.smoothstream (32275717, +2), peripheral.joystick (83371862, +30), pvr.argustv (5f48dcec, +4), pvr.demo (0fa9e1d0, +4), pvr.dvblink (a92f1264, +5), pvr.dvbviewer (3d0bea9a, +4), pvr.filmon (8743511d, +4), pvr.hdhomerun (b5ce9309, +4), pvr.hts (acd1a6ac, +5), pvr.iptvsimple (7a5a43f8, +4), pvr.mediaportal.tvserver (172a273c, +4), pvr.mythtv (e2b60252, +8), pvr.nextpvr (150698b7, +4), pvr.njoy (b5d65655, +4), pvr.pctv (feed5990, +4), pvr.stalker (dc112316, +6), pvr.vbox (c6594819, +4), pvr.vdr.vnsi (5498a8c1, +7), pvr.vuplus (ea3b33f6, +4), pvr.wmc (77af8daf, +4)
  • Includes commits from xbmc/master, ahead +6 (FernetMenta)
  • Exclude [env] kodi-999.10-aarch64-support.patch: Merged upstream
  • Include [env] e7cbe9cb: xf86-video-intel: Explicitely disable TearFree and TripleBuffer
  • Include [env] ed774729: Intel: Implement Passthrough-Range
  • Include [env] 98c65e6a: Kodi: Use Limited Range by default
  • Include [env] patch: xf86-video-intel: bump to 3fafabe
  • Include [env] patch: Fix SIGTERM patch after PR9748
  • Include [env] patch: Fix cmake after PR9750
  • Include [env] patch: Add extra headers needed by 3D BD MVC
  • Include [env] patch: Disable -werror as libnfs won't build 32-bit without it
  • Include [env] patch: Bump libbluray - include MVC support
  • Include [env] patch: Add experimental splash video for RPi
  • Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.*, os.* and peripheral.*
  • Include [env] patch: Enable pvr addons, disable pvr updates
  • Include [env] patch: Enable other binary addons
  • Include [env] PR:353: plymouth-lite: add bilinear interpolation patch
  • Include [env] PR:366: mysql: update to 5.7.12
  • Include [env] PR:381: splash: Select splash image based on native resolution
  • Include [env] PR:382: systemd: update to 230
  • Revert [env] 46b9b7b3: rtmpdump (Reason: use newclock5 bump)
  • Include [pkg] dd81c2f1: [librtmp] Update to 15-Dec-2015 from http://stream-recorder.com/forum/customized-rtmpdump-binaries-patch-file-t16103.html (kodi)
  • Include [pkg] 441217d8: logging: Add microsecond timer to log messages (kodi)
  • Include [pkg] patch: [skin.estuary] Hide watched items on home (kodi-theme-Estuary)
  • Include [pkg] patch: drm/i915: Extend Fake HDMI live status to Valley View (linux)
  • Include [pkg] patch: drm/i915/psr: Try to program link training times correctly (HSW fix) (linux)
  • Include [pkg] patch: Revert "drm/i915: Exit cherryview_irq_handler() after one pass" (BSW fix) (linux)
  • Include [pkg] patch: CSC: Remove average logic when saving NV12 surface on IVB+ (VAAPI fix) (libva-intel-driver)
  • Include [pkg] PR:8645: [video] Add season/TV show artwork to episodes/seasons even if they have their own fanart.
  • Include [pkg] PR:8824: videodb: fix smart playlists not honoring "Show empty TV shows" setting.
  • Include [pkg] PR:8922: [guiinfo] extend ranges for listitem properties
  • Include [pkg] PR:9803: [PeripheralCecAdapter] fix playback stopping on screensaver deactivated
  • Include [pkg] PR:9847: [PVR] Feature: Make instant recording behavior configurable
  • Include [pkg] PR:9862: PluginDirectory - avoid BusyDialog if not called by main thread
Build Highlights:
  1. NOTE: DVD playback remains temporarily disabled
  2. systemd: update to 230
  3. PR:9862: PluginDirectory - avoid BusyDialog if not called by main thread (should help address remaining PR9778 issues)
Build Details:
  1. LibreELEC.tv:
    • eventlircd update to new upstream (PR:374, 1 commit, 3 files changed)
  2. XBMC:
    • [xcode] - we don't commit our personal stuff here Smile (PR:9859, 1 commit, 1 file changed)
  3. pvr.mythtv:
    • 4.5.1 (PR:69, 4 commits, 5 files changed)
  4. Additional commits/pull requests/changes not yet merged upstream:
    • Added: [env] PR:382: systemd: update to 230
    • Added: [pkg] PR:9862: PluginDirectory - avoid BusyDialog if not called by main thread



RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - Milhouse - 2016-05-22

#0522 includes an update (PR9862) that should help address remaining issues after PR9778. Those with remaining busy-dialog related issues please test and confirm by commenting in PR9862.


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - smitopher - 2016-05-23

I have a NUC5PPYH with the Brasswell Pentium N3700 processor. I put it in Akasa fanless case.

I have a habit of feeling it to see if the fanless case is doing the job.

While running LE 7.0, when idle, it is barely above cold. After watching a 2 hour movie just warm.

Running build 518,

It gets very warm while idle and borderline hot while viewing a movie.

When debug mode is on, and idle, it reports the CPU as very busy, of 50% average of all cores.

I surmise that there are still race conditions in the Kernel when running on Brasswell.


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - nuc-LE - 2016-05-23

build #0522 on nuc hsw i3 still having a big mountain of dropped frames and basically very choppy playback when it does it. I hope someone can suggest or can help me figure it out. debug


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - aesthetiker - 2016-05-23

Thanks for the hard work and the buillds. One issue, i checked kodi log nothing shows up. My pvr.hts (tvheadend) client didn't load channels after system startup. I need to deactivate and activate pvr.hts then it works immediately.
How can i debug this? Thanks in advance


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - Milhouse - 2016-05-23

(2016-05-23, 07:16)aesthetiker Wrote: Thanks for the hard work and the buillds. One issue, i checked kodi log nothing shows up. My pvr.hts (tvheadend) client didn't load channels after system startup. I need to deactivate and activate pvr.hts then it works immediately.
How can i debug this? Thanks in advance
When did this problem start (which build)? There is a pvr.hts update in #0520.


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - fritsch - 2016-05-23

(2016-05-22, 22:51)Milhouse Wrote:
(2016-05-22, 22:32)Roby77 Wrote: @Milhouse I would like to test your patch and dr hdmi without custom edid loading

Is there a command to disable/enable custom edid loading without need to format ? (Tried renaming only edid file name but kodi change res at every startup

Umm... @fritsch?

A broken edid is broken, no matter how you want to load it. The method did not change. Forcing default resolution happens with xorg.conf


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - Roby77 - 2016-05-23

Forced Edid works cause i have audio Hd without switching on Avr on boot

I would like to temp disable custom edid load just to test @Milhouse fake edid patch and i would like to try dr hdmi hardware solution

I thinked that deleting / renaming .../firmware/edid.bin was sufficient but if I do it at every startup kodi changes res to 1024x768 even if i set 1920x1080

Tried to edit xorg but with my linux skill i can't change write permission


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - aesthetiker - 2016-05-23

(2016-05-23, 07:23)Milhouse Wrote:
(2016-05-23, 07:16)aesthetiker Wrote: Thanks for the hard work and the buillds. One issue, i checked kodi log nothing shows up. My pvr.hts (tvheadend) client didn't load channels after system startup. I need to deactivate and activate pvr.hts then it works immediately.
How can i debug this? Thanks in advance
When did this problem start (which build)? There is a pvr.hts update in #0520.

Since I upgraded from openelec to librelec. Using the #0521 at the moment. Tried to uninstall pvr.hts reconfigure etc no changes to this behavior.