Kodi Community Forum
v17 LibreELEC Testbuilds for x86_64 (Kodi 17.0) - Printable Version

Kodi Community Forum (https://forum.kodi.tv)
+-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33)
+--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111)
+---- Forum: Linux (https://forum.kodi.tv/forumdisplay.php?fid=52)
---- Thread: v17 LibreELEC Testbuilds for x86_64 (Kodi 17.0) (/showthread.php?tid=269815)



RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - fritsch - 2016-05-30

I cannot help you without the logs. If I find more time - we can make a speculation camp. Everybody gets 10 minutes to tell stories of others :-)


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - MrMC - 2016-05-30

Bah, speculation. I prefer the good old magic eight ball. It's 100 percent reliable Smile


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - Thomas233 - 2016-05-30

Hey milhouse,

(2016-05-29, 22:39)Milhouse Wrote: Build Highlights:
  1. NOTE: DVD ISO playback remains temporarily disabled
  2. VideoPlayer fixes

does that mean playback of physical disks is back ?

Thank you !


LibreELEC Testbuilds for x86 (Kodi 17.0) - Ipaddle - 2016-05-30

(2016-05-30, 18:22)Thomas233 Wrote: Hey milhouse,

(2016-05-29, 22:39)Milhouse Wrote: Build Highlights:
  1. NOTE: DVD ISO playback remains temporarily disabled
  2. VideoPlayer fixes

does that mean playback of physical disks is back ?

Thank you !

Or/and playback of video.ts folder.


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - Milhouse - 2016-05-30

(2016-05-30, 18:22)Thomas233 Wrote: Hey milhouse,

(2016-05-29, 22:39)Milhouse Wrote: Build Highlights:
  1. NOTE: DVD ISO playback remains temporarily disabled
  2. VideoPlayer fixes

does that mean playback of physical disks is back ?

Thank you !
Geez, I thought that might add some clarity - obviously not. No, support for physical disks of the DVD variety remains disabled.


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - Milhouse - 2016-05-30

(2016-05-30, 20:16)Ipaddle Wrote: Or/and playback of video.ts folder.

If it was disabled before, then it still is.


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - Milhouse - 2016-05-30

New LibreELEC.tv Krypton build #0530: Generic
(Supercedes previous build)

Code:
# uname -a
Linux LibreELEC 4.6.0 #1 SMP Mon May 30 21:04:29 BST 2016 x86_64 GNU/Linux

# lsb_release
LibreELEC (Milhouse) - Version: devel-20160530210302-#0530-gb6370f0 [Build #0530]

Based on tip of LibreELEC.tv master (b6370f0c, changelog) and tip of XBMC master (0ecc4b55, changelog) with the following modifications: Build Highlights:
  1. NOTE: DVD ISO/disk playback remains temporarily disabled
  2. libnfs update
Build Details:
  1. LibreELEC.tv:
    • linux: add support for Terratec Cinergy S2 Rev.3 (PR:402, 1 commit, 1 file changed)
  2. libnfs:
    • Fix deadlock once again (PR:148, 2 commits, 3 files changed)



RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - mule1 - 2016-05-31

(2016-05-30, 16:24)fritsch Wrote: Changing device does a reenumeration. So if devices before and after are different, this has only one reason: while booting up EDID / Audio information was not yet available and no signal was emitted when that changed. I am running a HSW based setup myself with edid forced and xorg.conf I never had an issue in that combination. Provide Xorg.0.log dmesg | pastebinit and kodi.log with an unsuccesful boot _with_ edid forced.

Thanks for your help! Here we go:

LibreELEC:~ # dmesg | pastebinit
http://sprunge.us/CGOH

KODI-Log
http://pastebin.com/y3ubXdDQ

Xorg.0.log
http://pastebin.com/CFeqJ3RD


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - Roby77 - 2016-05-31

(2016-05-26, 07:44)fritsch Wrote: It's a kernel bug which has nothing to do with kodi. So in your case, we always need dmesg | pastebinit - best booted with drm.debug=0xe - you can always add a copy to your fdo bugreport.

Yes...just for the record and for others..

Installed win10 over usb 3 fast pen disk and tried several start & stop ( like F1 Car : D ) and no problem of black screen or boot without forced edid

I was afraid that was an AVR fault (firmware or hardware)

Let's hope that in the future will be solved Blush

Nb: i only noticed a difference

Linux default buffer used by graphic driver 2...win 3

PQ for me it's the same (maybe linux better gray ramp scale, but difficult to say without live compar)


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - Roby77 - 2016-05-31

@Milhouse could it be possible to have a test version with kernel 4.7 rc1? Big GrinBig GrinBig Grin


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - fritsch - 2016-05-31

(2016-05-31, 21:01)mule1 Wrote:
(2016-05-30, 16:24)fritsch Wrote: Changing device does a reenumeration. So if devices before and after are different, this has only one reason: while booting up EDID / Audio information was not yet available and no signal was emitted when that changed. I am running a HSW based setup myself with edid forced and xorg.conf I never had an issue in that combination. Provide Xorg.0.log dmesg | pastebinit and kodi.log with an unsuccesful boot _with_ edid forced.

Thanks for your help! Here we go:

LibreELEC:~ # dmesg | pastebinit
http://sprunge.us/CGOH

KODI-Log
http://pastebin.com/y3ubXdDQ

Xorg.0.log
http://pastebin.com/CFeqJ3RD

All fine after a brief look. Kodi finds the SNY-whatever device. So here you don't have audio?


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - Milhouse - 2016-05-31

New LibreELEC.tv Krypton build #0531: Generic
(Supercedes previous build)

Code:
# uname -a
Linux LibreELEC 4.6.0 #1 SMP Tue May 31 21:04:36 BST 2016 x86_64 GNU/Linux

# lsb_release
LibreELEC (Milhouse) - Version: devel-20160531210311-#0531-gb6370f0 [Build #0531]

Based on tip of LibreELEC.tv master (b6370f0c, changelog) and tip of XBMC master (1e56320d, changelog) with the following modifications: Build Highlights:
  1. NOTE: DVD ISO/disk playback remains temporarily disabled
  2. Do not decode eia_608 subtitles
  3. mesa: update to 12.0.0-rc1
Build Details:
  1. XBMC:
    • DVDOverlayCodecFFmpeg: Do not decode eia_608 subtitles (PR:9887, 1 commit, 1 file changed)
  2. peripheral.joystick:
    • [buttonmaps] Add missing analog stick directions to linux buttonmaps (e0ba45d0)
  3. Additional commits/pull requests/changes not yet merged upstream:
    • Added: [env] patch: mesa: update to 12.0.0-rc1



RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - Milhouse - 2016-05-31

(2016-05-31, 22:02)Roby77 Wrote: @Milhouse could it be possible to have a test version with kernel 4.7 rc1? Big GrinBig GrinBig Grin

I'm sure we'll get on the 4.7 release candidate train soon enough, although it might be prudent to avoid the first few candidates as you might not thank me if they're pretty rough...


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - mule1 - 2016-06-01

(2016-05-31, 22:37)fritsch Wrote:
(2016-05-31, 21:01)mule1 Wrote:
(2016-05-30, 16:24)fritsch Wrote: Changing device does a reenumeration. So if devices before and after are different, this has only one reason: while booting up EDID / Audio information was not yet available and no signal was emitted when that changed. I am running a HSW based setup myself with edid forced and xorg.conf I never had an issue in that combination. Provide Xorg.0.log dmesg | pastebinit and kodi.log with an unsuccesful boot _with_ edid forced.

Thanks for your help! Here we go:

LibreELEC:~ # dmesg | pastebinit
http://sprunge.us/CGOH

KODI-Log
http://pastebin.com/y3ubXdDQ

Xorg.0.log
http://pastebin.com/CFeqJ3RD

All fine after a brief look. Kodi finds the SNY-whatever device. So here you don't have audio?

Yes, no audio and the video pauses every 2 or 3 seconds then continous to play for 2 or 3 seconds, then pauses again and so on and the log is beeing flooded with the error messages that the audio render could not be created.

Side note: SNY = It's not a trick, it's a Sony-(Beamer). But as said I have the same issues on a second TV which is from Samsung.


RE: LibreELEC Testbuilds for x86 (Kodi 17.0) - fritsch - 2016-06-01

(2016-06-01, 00:05)mule1 Wrote:
(2016-05-31, 22:37)fritsch Wrote:
(2016-05-31, 21:01)mule1 Wrote: Thanks for your help! Here we go:

LibreELEC:~ # dmesg | pastebinit
http://sprunge.us/CGOH

KODI-Log
http://pastebin.com/y3ubXdDQ

Xorg.0.log
http://pastebin.com/CFeqJ3RD

All fine after a brief look. Kodi finds the SNY-whatever device. So here you don't have audio?

Yes, no audio and the video pauses every 2 or 3 seconds then continous to play for 2 or 3 seconds, then pauses again and so on and the log is beeing flooded with the error messages that the audio render could not be created.

Side note: SNY = It's not a trick, it's a Sony-(Beamer). But as said I have the same issues on a second TV which is from Samsung.

Please reproduce once again, but this time please enable debug logging before starting. As I don't see which audio device it wanted to open.