(2018-07-13, 12:32)SkywalkerPD Wrote: Has there been a wifi related change in one of the past 10/15 builds? After build #0531 I noticed a big difference in Wifi stability in a positive way. It was about 100% more stable then before. But a couple of builds back I began to notice that the Wifi was very unstable again?

(2018-08-20, 18:30)Pienoet Wrote: @Milhouse @popcornmix is there already support for PoE (hat).

I saw there almost avaible on the pihut

(2018-08-20, 18:42)Milhouse Wrote:

(2018-08-20, 18:30)Pienoet Wrote: @Milhouse @popcornmix is there already support for PoE (hat).

I saw there almost avaible on the pihut

All recent PoE kernel and firmware commits are included in these builds. See #0810.

(2018-08-18, 16:12)delinend Wrote: I'm trying to use MMAL instead of OMXplayer, but have no luke, with all my movie content.

With MMAL, I offen see jitter and studdering, when the movie is making a pan in a sceene.

I want to see the movie, in the original framerate on my TV, so I use "adjust display refresh rate to match video" and "sync playback to display", and a Whitelist setting. 
My TV is switching fine on 25fps(50fps) and 24fps for some Bluray ISO's. But I still see jitter and studdering, on "fast" movie motions.

My setup:
RPI2 built #817 
Local USB harddisk (movies).

Last log with a Bluray/ISO playback an problems: https://pastebin.com/kiJcWahd

Hope someone can look into this problem.

Btw. I can playback all my contend with OMXPlayer, without any problems.

Best regards.

(2018-08-20, 15:52)1bertox Wrote: Hello everyone.

after the last two upgrades, build 0818 and 0819, I can no longer access the "Play or Stop" commands nor the audio and video or subtitle options in live transmissions. I have to go back to the home screen to stop the live video.

any solution in sight for this problem?

text:
# uname -a

Linux rpi512 4.14.62 #1 Mon Aug 20 21:04:20 BST 2018 armv6l GNU/Linux



# vcgencmd version

Aug 16 2018 17:35:18 

Copyright © 2012 Broadcom

version 31e0613622dc2f2463bf3dd74e6c897d91201a4d (clean) (release)



# lsb_release

LibreELEC (Milhouse): devel-20180820210248-#0820-gdcb8636 [Build #0820]



# Kodi version

(18.0-BETA1 Git:f08d8686e96edcfbe065d4e5094ab6221da057b9). Platform: Linux ARM 32-bit

• Includes newclock5 patches
  
• Includes latest commits from kernel branch rpi-4.14.y
  
• Includes latest bcm2835-driver master (ebbecf9, ahead +2)
  
• Includes latest kodi-platform master (e8574b8)
  
• Includes latest libcec master (8adc786)
  
• Includes latest libnfs master (322148b, ahead +6)
  
• Includes latest p8-platform master (a822e19)
  
• Includes latest addons: inputstream.adaptive (430c440), inputstream.rtmp (0cc2da1), peripheral.joystick (08e4a1a), peripheral.xarcade (91567dd), pvr.argustv (1459cea), pvr.demo (481f2fa), pvr.dvblink (c66203b), pvr.dvbviewer (c3ceb0b), pvr.filmon (93ae10d), pvr.hdhomerun (ced70bd), pvr.hts (0f06313), pvr.iptvsimple (55637c8), pvr.mediaportal.tvserver (e8b0a9c, +4), pvr.mythtv (e61f47c), pvr.nextpvr (6f0515b), pvr.njoy (204d95b), pvr.octonet (1e44819), pvr.pctv (32d4b66), pvr.stalker (f84483c), pvr.teleboy (0f3ccfd, +2), pvr.vbox (c115a14), pvr.vdr.vnsi (bb4fb30), pvr.vuplus (75179a3), pvr.wmc (b5fe5a1), pvr.zattoo (12134c8), vfs.libarchive (fdc7441), vfs.sftp (05442d1, +2)
  
• Include [env] compare (perma): RPi: enable CMA debugging
  
• Include [env] patch: RPi/RPi2: enable Broadcom WiFi debugging (see details)
  
• Include [env] patch: rev hack for kodi
  
• Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
  
• Include [env] patch: Bump included addon versions to prevent online updates
  
• Include [env] patch: Add experimental splash video for RPi
  
• Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, peripheral.joystick/xarcade, other)
  
• Include [env] PR:2872 (perma): update dvb addons
  
• Include [env] PR:2892 (perma): scripts/image: use maximum lzo and zstd compression level for images
  
• Include [pkg] PR:14 (perma): fixed: we have to call ssh_free on the session, not only disconnect (vfs.sftp)
  

1. VideoPlayer: add audiosetting for downmix clev
   

1. LibreELEC.tv:
   • docs: force full githashes (PR:2897, 1 commit, 1 file changed)
     
   • cputemp: add amdgpu, prefer dedicated gpu (PR:2899, 1 commit, 1 file changed)
     
   • xorg-server: update to xorg-server-1.20.1 (PR:2882, 1 commit, 2 files changed)
     
   • linux (Generic): update to linux-4.18.3 (PR:2880, 8 commits, 10 files changed)
     
   • kodi: use HTTPS and SHA256 for LibreELEC repo addons (PR:2877, 1 commit, 2 files changed)
     
   • brcmfmac_sdio-firmware-rpi: update to brcmfmac_sdio-firmware-rpi-8c1e2bff (PR:2901, 1 commit, 1 file changed)
     
   • kodi: add option to use RPi vendor repo (PR:2900, 1 commit, 3 files changed)
     
   • zstd, libgcrypt, libpng: package updates (PR:2893, 3 commits, 3 files changed)
     • libgcrypt: update to 1.8.3
       
     • zstd: update to 1.3.5
       
     • libpng: update to 1.6.35
       
   • mkimage: support tty in run mode (PR:2902, 1 commit, 1 file changed)
     
2. XBMC:
   • Prevent deadlock when calling SetWindowPos from another thread (PR:14306, 1 commit, 2 files changed)
     
   • [JSON]Player.GetActivePlayers return "playertype" (external, remote, internal) (PR:14315, 1 commit, 6 files changed)
     
   • VideoPlayer: add audiosetting for downmix clev (PR:14326, 1 commit, 6 files changed)
     
3. vfs.sftp:
   • [depends] bump libssh to 0.8.1 (PR:15, 2 commits, 9 files changed)
     
4. Additional commits/pull requests/changes not yet merged upstream:
   • Updated: [env] PR:2872 (perma): update dvb addons
     

(2018-08-19, 02:26)Milhouse Wrote: mpd breaks for various reasons. I built it a little while ago but may require a new build which I've just uploaded - have a look here.

(2018-08-19, 02:26)Milhouse Wrote: Not sure, hopefully someone else can help - if this problem started recently then identifying the first non-working build from the builds published in this thread will help enormously.

(2018-08-19, 02:26)Milhouse Wrote: Look forward to your log - please make sure debug logging is enabled.

(2018-08-19, 02:26)Milhouse Wrote: Could be a driver issue, it's not something we change in LibreELEC

(2018-08-19, 02:26)Milhouse Wrote: https://wiki.libreelec.tv/compile

(2018-08-20, 21:31)germa18 Wrote:

(2018-08-18, 16:12)delinend Wrote: I'm trying to use MMAL instead of OMXplayer, but have no luke, with all my movie content.

With MMAL, I offen see jitter and studdering, when the movie is making a pan in a sceene.

I want to see the movie, in the original framerate on my TV, so I use "adjust display refresh rate to match video" and "sync playback to display", and a Whitelist setting. 
My TV is switching fine on 25fps(50fps) and 24fps for some Bluray ISO's. But I still see jitter and studdering, on "fast" movie motions.

My setup:
RPI2 built #817 
Local USB harddisk (movies).

Last log with a Bluray/ISO playback an problems: https://pastebin.com/kiJcWahd

Hope someone can look into this problem.

Btw. I can playback all my contend with OMXPlayer, without any problems.

Best regards.

the problem seems gone with #0819

(2018-08-20, 21:34)germa18 Wrote:

(2018-08-20, 15:52)1bertox Wrote: Hello everyone.

after the last two upgrades, build 0818 and 0819, I can no longer access the "Play or Stop" commands nor the audio and video or subtitle options in live transmissions. I have to go back to the home screen to stop the live video.

any solution in sight for this problem?

 same problem here, it seems that is related to the kodi beta 2 
the latest build with no issue on command play / stop / others is on #0817

text:
# uname -a

Linux rpi512 4.14.62 #1 Tue Aug 21 21:32:22 BST 2018 armv6l GNU/Linux



# vcgencmd version

Aug 16 2018 17:35:18 

Copyright © 2012 Broadcom

version 31e0613622dc2f2463bf3dd74e6c897d91201a4d (clean) (release)



# lsb_release

LibreELEC (Milhouse): devel-20180821213019-#0821-gac552b2 [Build #0821]



# Kodi version

(18.0-BETA1 Git:f08d8686e96edcfbe065d4e5094ab6221da057b9). Platform: Linux ARM 32-bit

• Includes newclock5 patches
  
• Includes latest commits from kernel branch rpi-4.14.y
  
• Includes latest bcm2835-driver master (ebbecf9, ahead +2)
  
• Includes latest kodi-platform master (e8574b8)
  
• Includes latest libcec master (8adc786)
  
• Includes latest libnfs master (322148b, ahead +6)
  
• Includes latest p8-platform master (a822e19)
  
• Includes latest addons: inputstream.adaptive (430c440), inputstream.rtmp (0cc2da1), peripheral.joystick (08e4a1a), peripheral.xarcade (91567dd), pvr.argustv (1459cea), pvr.demo (481f2fa), pvr.dvblink (c66203b), pvr.dvbviewer (c3ceb0b), pvr.filmon (93ae10d), pvr.hdhomerun (ced70bd), pvr.hts (0f06313), pvr.iptvsimple (55637c8), pvr.mediaportal.tvserver (e8b0a9c, +4), pvr.mythtv (e61f47c), pvr.nextpvr (6f0515b), pvr.njoy (204d95b), pvr.octonet (1e44819), pvr.pctv (32d4b66), pvr.stalker (f84483c), pvr.teleboy (0f3ccfd, +2), pvr.vbox (c115a14), pvr.vdr.vnsi (bb4fb30), pvr.vuplus (75179a3), pvr.wmc (b5fe5a1), pvr.zattoo (12134c8), vfs.libarchive (af2043d, +1), vfs.sftp (97d46bb, +3)
  
• Include [env] compare (perma): RPi: enable CMA debugging
  
• Include [env] patch: RPi/RPi2: enable Broadcom WiFi debugging (see details)
  
• Include [env] patch: rev hack for kodi
  
• Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
  
• Include [env] patch: Bump included addon versions to prevent online updates
  
• Include [env] patch: Add experimental splash video for RPi
  
• Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, peripheral.joystick/xarcade, other)
  
• Include [env] PR:2872 (perma): update dvb addons
  
• Include [env] PR:2892 (perma): scripts/image: use maximum lzo and zstd compression level for images
  
• Include [pkg] PR:14335 (perma): kodi-send: restore -a support broken by #13804
  

1. update dvb-fw, settings add-on
   
2. [PVR] Fixes for hidden channels
   
3. fix some ffmpeg warnings caused by incorrect code
   
4. [Estuary] Fix condition for focus on the stop button
   
5. Settings: Remove circular dependency on CPowerManager
   

1. LibreELEC.tv:
   • adafruit-libraries: update same packages and switch to full git hash (PR:2905, 1 commit, 20 files changed)
     
   • settings: update to 080f0dc (PR:2903, 1 commit, 1 file changed)
     
   • update dvb-fw and settings hash (PR:2906, 2 commits, 2 files changed)
     
2. XBMC:
   • Windowing: GBM - fix window system initialization (PR:14331, 1 commit, 3 files changed)
     
   • [PVR] Fixes for hidden channels (PR:14329, 2 commits, 6 files changed)
     
   • fix some ffmpeg warnings caused by incorrect code (PR:14330, 1 commit, 4 files changed)
     
   • [Estuary] Fix condition for focus on the stop button (PR:14333, 1 commit, 1 file changed)
     
   • AE: adapt to new ffmpeg api - kills warning (PR:14332, 1 commit, 1 file changed)
     
   • Fix compiler warnings (PR:14309, 14 commits, 17 files changed)
     
   • Settings: Remove circular dependency on CPowerManager (PR:14305, 1 commit, 10 files changed)
     
3. vfs.libarchive:
   • fixed: only add actual rar archives for old filename (PR:22, 1 commit, 1 file changed)
     
4. vfs.sftp:
   • fixed: we have to call ssh_free on the session, not only disconnect (PR:14, 1 commit, 1 file changed)
     
5. newclock5:
   • Commits no longer in build:
     • [audio] Add settings option to boost centre channel when downmixing (d337fa81)
       
6. Additional commits/pull requests/changes not yet merged upstream:
   • Added: [pkg] PR:14335 (perma): kodi-send: restore -a support broken by #13804
     

(2018-08-21, 23:20)1bertox Wrote: Hello again.
updating the question of the functions of "live videos" that after the last Builds is not working.

(2018-08-21, 23:20)1bertox Wrote: I use the "PVR IPTV Simple Client" for IPTV listings and a "BR PLAY" addon to access my pay-TV channels here in Brazil.

but other live streaming addons the same problem happens, except in online videos, where the functions work correctly.

another detail is that my remote control of my LG tv does not work anymore to control these addons, only working the function of returning to the previous screen.

follows some images in attachments of a video with an older Build and an image with the photo of the last Build # 0820.

(2018-08-21, 23:20)1bertox Wrote: Ps. the Netfilix addon no longer works. loads the lists but does not open the videos.

(2018-08-21, 01:24)komerdoor Wrote: I solved it by adding some amixer commands to autostart.sh. The Allo firmware was also missing but I added a command to autostart.sh to copy them to /lib/firmware