Configuring ir remote control - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111) +---- Forum: Linux (https://forum.kodi.tv/forumdisplay.php?fid=52) +---- Thread: Configuring ir remote control (/showthread.php?tid=322775) |
Configuring ir remote control - cristian_c - 2017-10-21 Hi, I've installed Kodi 16.1 ubuntu package. I'd like to use an ite 9135 receiver with its own remote control. When I type: Code: sudo ir-keytable Code: Found /sys/class/rc/rc0/ (/dev/input/event13) with: If I type Code: sudo ir-keytable -t or: Code: sudo evtest key presses on remote control are successfully detected by Kodi. I've installed Keymap Editor add-on in Kodi, but it doesn't detect key presses on remote control when I try to edit shortcuts. How should I configure remote control in Kodi? Any ideas? RE: Configuring ir remote control - P.Kosunen - 2017-10-22 X.org might use remote as keyboard. RE: Configuring ir remote control - cristian_c - 2017-10-22 (2017-10-22, 16:05)P.Kosunen Wrote: X.org might use remote as keyboard. Ok, but how could I solve that issue? RE: Configuring ir remote control - P.Kosunen - 2017-10-22 Many ways possible, keymapping might be easiest. http://kodi.wiki/view/HOW-TO:Modify_keymaps Also you can blacklist remote device from xorg.conf and use lirc. IIRC some ir keytable way is also possible, but i don't know more about it. RE: Configuring ir remote control - cristian_c - 2018-03-31 I've connected ite 9135 receiver to a pc running Archlinux and Code: sudo ir-keytable Code: Found /sys/class/rc/rc0/ (/dev/input/event14) with: So, I copied /lib/udev/rc_keymaps/it913x_v1 table to /etc/rc_keymaps directory. Then, I tested all the remote control keys, via the following command: Code: sudo ir-keytable -t -s rc0 Code: scancode = 0x08 Code: # table it913x_v1, type: NEC Well, after saving the file, I need to update mapping for the device writing the new values included in the file. So, I've to type: Code: sudo ir-keytable -s rc0 -c Code: sudo ir-keytable -s rc0 -w /etc/rc_keymaps/it913x_v1 After a reboot, I've started Kodi and Keymap Editor add-on has detected keypresses coming from the remote control. |