+- Kodi Community Forum (https://forum.kodi.tv)
+-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33)
+--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111)
+---- Forum: Raspberry Pi (https://forum.kodi.tv/forumdisplay.php?fid=166)
+---- Thread: RPI3 (/showthread.php?tid=333748)
RPI3 - arielf - 2018-07-17
Hello, my RPI3 connected by wi fi, does not synchronize the time in any way.
I am using libreelec 9 + kodi 18 (milhouse). I already configured the NTP servers, I do not have a firewall. It has a solution ?
Link LogFile
http://ix.io./1hto
RE: RPI3 - Milhouse - 2018-07-17
Upload your kodi log from within the LibreELEC Settings add-on and post the url.
RE: RPI3 - arielf - 2018-07-17
http://ix.io./1hto
RPI3 - Klojum - 2018-07-17
The forum moderators have determined that banned addons (wiki) are present on your system. To receive assistance here, these banned items must be removed. If a clean log is not submitted within 3 days, then the relevant post(s) will be removed after this time.
RE: RPI3 - arielf - 2018-07-17
Hello, my RPI3 connected by wi fi, does not synchronize the time in any way.
I am using libreelec 9 + kodi 18 (milhouse). I already configured the NTP servers, I do not have a firewall. It has a solution ?
NEW CLEAN Link LogFile
http://ix.io./1hv1
RE: RPI3 - Klojum - 2018-07-17
(2018-07-17, 18:27)arielf Wrote: Hello, my RPI3 connected by wi fi, does not synchronize the time in any way.There is a network setting in the LibreELEC Settings Add-on called "Wait for network". Is it enabled, and if so, set to more than 10 seconds?
RE: RPI3 - arielf - 2018-07-17
Yes, it is set to 60 seconds. The strange thing is that it worked until version 706, then stopped working.
RE: RPI3 - Milhouse - 2018-07-18
(2018-07-17, 18:52)arielf Wrote: Yes, it is set to 60 seconds. The strange thing is that it worked until version 706, then stopped working.
It's possible connman is only making IPv6 attempts when requesting time server information, and this is failing in your network. Try disabling IPv6 on your wifi connection in the LibreELEC Settings addon.
There's not really anything relevant in #0706 that might explain a change of Connman or NTP behaviour, are you sure it started with #0706, or have you reconfigured your access point in some way recently?
RE: RPI3 - arielf - 2018-07-23
Today, I connect my RPI3 via wired network and the NTP works without problems. Obviously it is something with the WI Fi connection that does not work.
I do not know what is the problem
Thank you