[LINUX] HOW-TO get Live TV with VDR working in XBMC for Linux - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: Tips, tricks, and step by step guides (https://forum.kodi.tv/forumdisplay.php?fid=110) +--- Thread: [LINUX] HOW-TO get Live TV with VDR working in XBMC for Linux (/showthread.php?tid=45314) |
- tume2 - 2009-12-31 stich86 Wrote:hi guys, I can confirm that recording does not work. i had it almost working until my hard disk got broken two days a go. vdr ignores svdrphosts.conf and listens wrong interface, it connects xine on network address instead loopback. - il_ferra - 2010-01-07 Hello! Thanks again to all the people contributing to XBMC and of course pvr-testing2 branch! I was wondering if is there a way to change channel numbers within xbmc? I would have the same vdr channels numeration. I tried to edit sqlLite MyTV1 db without success, is there a trick to achieve that? I'm able to change displayed number but then channel change doesn't work anymore. Should i update other tables than mytv1? Thanks - bolzerrr - 2010-01-07 Hi! Great guide, i hope i get my VDR working with this. Actually i´m stuck trying to compile xine: "sudo checkinstall --fstrans=no --install=yes --pkgname=libxine2-dev --pkgversion "1.2.svn`date +%Y%m%d`-12ubuntu3"" drops a: make[3]: *** [libxineutils.la] Error 2 make[3]: Leaving directory `/home/vdr/src/xine-lib-1.2/src/xine-utils' make[2]: *** [../../src/xine-utils/libxineutils.la] Error 2 make[2]: Leaving directory `/home/vdr/src/xine-lib-1.2/src/xine-engine' make[1]: *** [../src/xine-engine/libxine.la] Error 2 make[1]: Leaving directory `/home/vdr/src/xine-lib-1.2/misc' can someone please help me with this? - tume2 - 2010-01-09 I updated xbmc to r26548 and reinstalled vdr, now recording is working. Thanks bolzerrr, we need more than last six rows of that log. I did apt-get build-dep libxine, xinelib or something i cant remember now. - il_ferra - 2010-01-09 bolzerrr Wrote:Hi! post a bit more lines ... please use make and not "make -j<number>" - il_ferra - 2010-01-10 How does it work recording playback? my vdr is remote, should i configure any shared folder? Wich version of VDR are you using 1.7.8 or 1.7.9? - dubstar_04 - 2010-01-17 Heres a couple of videos I have made: pvr-testing2 running on ubuntu (same machine as vdr): http://www.youtube.com/watch?v=BJpUAQ_Qkzk pvr-testing2 running on snow leopard (remote frontend over wireless g): http://www.youtube.com/watch?v=GysT_8pu4UU Both work really well and the pvr-testing branch is just a few features away from being suitable replacement for any native frontend. Thanks to all the devs. - il_ferra - 2010-01-17 nice videos! Few questions: -VDR version? -which vdr plugins? -XBMC svn revision? -Do you compile it by your own on mac? -my epg loading is quite slow, yuor is much faster. Did you tweak anything? Thanks - nunu - 2010-01-17 Hello everybody, at present i use XBMC revision 26942 with VDR 1.7.10-4tvt1 under ubuntu karmic The 3 "main" issues i have are : 1) the replay from a remote XBMC doesn't work 2) i can't delete recordings 3) sometime VDR seems not started , (i must do a /etc/init.d/vdr start), and i must restart XBMC after (the "reconnect" doesn't seems to work). I would like to know if on your side it's OK or this is already knowned issues ? If it's OK, which verison of VDR & revision of XBMC you used ? nunu - dubstar_04 - 2010-01-17 il_ferra Wrote:nice videos! I use VDR and the streamdev plugin from here: deb http://ppa.launchpad.net/the-vdr-team/vdr-ubuntu-karmic/ubuntu karmic main As described here: http://forum.xbmc.org/showthread.php?tid=62696 I build XBMC on Ubuntu almost everyday so im not really sure what revision was used in the video. I don't build XBMC on the mac. I used the latest revision from here: http://xbmc.picmania.org/ I have not tweaked anything and my install is very basic. As follows: 1. Install VDR: as per http://forum.xbmc.org/showthread.php?tid=62696 2. Create channels.conf using w_scan: good info here: http://edafe.org/vdr/w_scan/ 3. Setup VDR: edit streamdevhosts.conf vdrsvdrphosts.conf to allow a connection. I have: 127.0.0.1 192.168.1.0/24 4. Start VDR: sudo /etc/init.d/vdr start 5. start XBMC 6. Enable the VDR addon on the TV section Every thing else you can see in the video. regards, Dubstar_04 - dubstar_04 - 2010-01-17 nunu Wrote:The 3 "main" issues i have are : 1. Check the settings in the streamdevhosts.conf vdrsvdrphosts.conf files. Allow connections from your network: 192.168.*.*/24 where *.* are the appropriate settings for your network. 2. I also have this issue, I check all my privileges, which leads me to think its functionality that is yet to be implemented. 3. Have a look at your /etc/vdr/vdr.default file and make sure that vdr isn't able to shutdown, i can't think of anything else at the moment. As for revisions: I use VDR from here: http://forum.xbmc.org/showthread.php?tid=62696 and build XBMC almost daily. I hope this helps, Dubstar_04 - nunu - 2010-01-17 for the point 1) i can watch the TV throught the network but not the recordings. I have put 0.0.0.0/0 to be sure for th epoint 3) VDR was able to shutdown, i test without this option. Regards !! - dubstar_04 - 2010-01-17 nunu Wrote:for the point 1) i can watch the TV throught the network but not the recordings. Now you have tv streaming through the network you should change 0.0.0.0/0 to be network or ip specific to be more secure. As for watching the recording over the network you could always share the recordings folder via smb and add it as a source in your videos? cheers, Dubstar_04 - Goga777 - 2010-01-17 what about of channels switching speed in pvr2 ? does it fast as in native vdr ? 1-2 seconds ? - dubstar_04 - 2010-01-17 Goga777 Wrote:what about of channels switching speed in pvr2 ? does it fast as in native vdr ? 1-2 seconds ? Channel switching is really quick. I will make another video later this week with a proper run through of the current features and performance. regards, Dubstar_04 |