Problem getting Broadcom Crystal HD BMC70015 to work with XBMC - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111) +---- Forum: OS independent / Other (https://forum.kodi.tv/forumdisplay.php?fid=228) +---- Thread: Problem getting Broadcom Crystal HD BMC70015 to work with XBMC (/showthread.php?tid=70537) |
- Einkoro - 2010-09-26 Looks like the 480p h264 content is only working on the first video played in XBMC after launching. CrystalHD fails to open on the second and each attempt afterwards. http://janpingel.com/misc/files/xbmc.old.log <-- Around line 17065 it fails where it worked the first time around 2163 I have to reboot the AppleTV to get it to work once more. Exiting XBMC and starting it up again doesn't work as the device fails to initialize at startup until a reboot. http://janpingel.com/misc/files/xbmc.log <-- here it fails immediately after exiting XBMC and starting it up again without a reboot - davilla - 2010-09-26 Einkoro Wrote:Looks like the 480p h264 content is only working on the first video played in XBMC after launching. CrystalHD fails to open on the second and each attempt afterwards. Thanks. open a new thread a post dmesg, crystalhd card type, crystalhd driver/lib version. - homer_doh - 2010-10-01 Tried sleep on Mac OS X 10.6.4 with r160, Crystal HD stops working after resume. XBMC Dharma beta 1. Before sleep: 07:44:21 T:2955026432 M:539471872 INFO: DVDVideoCodecCrystalHD: Opened Broadcom Crystal HD Codec After resume: 07:45:22 T:2955026432 M:497266688 ERROR: DVDVideoCodecCrystalHD: Failed to open Broadcom Crystal HD Codec xbmc.log and kernel.log - davilla - 2010-10-01 homer_doh Wrote:Tried sleep on Mac OS X 10.6.4 with r160, Crystal HD stops working after resume. you will need the next pending beta build for this to work properly. - beytarj - 2010-10-05 Mac mini / bcm70012 / OSX 10.6.4 / CrystalHD 3.8.0 / Dharma beta 2 i get 2 things: 1. when playing movie, in dmesg there is lot lines written with "getting picture info" and some "invalid line number" dmesg log: http://pastebin.com/mfQAFVbY 2. when "pause" movie and after that "play", the movie get slow for half minute, and i see the vq go to 0%, and slowly go up to ~90%. that happen with dharma beta 2. with beta 1 its not happen. xbmc log: http://www.paste-it.net/public/q66a3e5 - Mouton - 2010-10-08 I have problems playing 1080i MPEG-2 videos (stuttering). I found references to a known issue with interlaced videos, but since this isn't mentioned in the CrystalHD status thread, and there's no history for me to look if it was ever there, I just don't know if it should be fixed now or not. Platform: Mac OS X 10.5, Mac Mini (2008), XBMC Dharma beta 2, CrystalHD (BCM70015) with driver 3.6.0 (r156) (Also tested on r34458; same behaviour.) 1. Full xbmc debug log 2. Media info for the offending file Short version: 1920x1080 interlaced MPEG-2, with AC3 audio, in a MPEG-PS container. 3. Describe the issue in as many details as you can: When playing videos recorded from OTA HD broadcasts (using an EyeTV Hybrid), playback is very choppy (video only; audio seems fine). 4. 75MB file clip - Mouton - 2010-10-11 I have problems playing certain H.264 videos; the image quality is worst than what I get if I disable CrystalHD decoding in settings. This doesn't happen with all H.264 files. Platform: Mac OS X 10.5, Mac Mini (2008), XBMC Dharma beta 2, CrystalHD (BCM70015) with driver 3.6.0 (r156) 1. Full xbmc debug log, software decoding Full xbmc debug log, CrystalHD decoding The file played is named '22 bullets.mkv', but is in fact a MOV file, that I renamed to .mkv to simplify my test runs. 2. Media info for the offending file Short version: 1280x544 progressive H.264 [email protected], with DTS audio. 3. Describe the issue in as many details as you can: Screenshot, with software decoding Screenshot, with CrystalHD decoding Notice the left and right edges of the spinning thing, in the CrystalHD screenshot. 4. 60MB file clip Original was a MKV; cut in QT7, and saved as a MOV. Issue was visible with both the original MKV and the cut MOV. - davilla - 2010-10-11 Mouton Wrote:I have problems playing certain H.264 videos; the image quality is worst than what I get if I disable CrystalHD decoding in settings. Known issue that is fixed, see http://forum.xbmc.org/showthread.php?tid=82588 and continue any futher discussion in that thread please. - beytarj - 2010-10-18 Mac mini / bcm70012 / OSX 10.6.4 / CrystalHD 3.6.0 / Dharma beta 3 go back to 3.6 after system crash in movies. now i get a/v sync problems, after i resume movie from stop. the a/v sync go up to 8 and not getting better. xbmc log: http://www.paste-it.net/public/qe0ae9a/ - davilla - 2010-10-18 beytarj Wrote:Mac mini / bcm70015 / OSX 10.6.4 / CrystalHD 3.6.0 / Dharma beta 3 Looks like an audio codec problem "CDVDMessageQueue(audio)::Get - asked for new data packet, with nothing available", try analog out and see if you get the same results. Create a new forum post if you still have problems. If you did get a system crash with 3.8.0, I'd like to see the crashreporter logs, osx wlll make one if the system crashes. New forum post please. - beytarj - 2010-10-18 davilla Wrote:Looks like an audio codec problem "CDVDMessageQueue(audio)::Get - asked for new data packet, with nothing available", try analog out and see if you get the same results. Create a new forum post if you still have problems. If you did get a system crash with 3.8.0, I'd like to see the crashreporter logs, osx wlll make one if the system crashes. New forum post please. i get the same With analog out - beytarj - 2010-10-19 Mac mini / bcm70012 / OSX 10.6.4 / CrystalHD 3.8.0 / Dharma beta 3 System crash with kernel panic while play mkv file. panic log: http://www.paste-it.net/public/t8e18e0/ - homer_doh - 2010-10-19 davilla Wrote:you will need the next pending beta build for this to work properly. Beta 3 with driver/lib/fw r170, sleep/resume works like a charm. Not sure if it's beta 3 or r170, but it seems like there's more stuttering after pause/play. Sometimes the stuttering goes away by itself after a while (5-10 seconds), sometimes the stuttering goes away if I pause/play 3-4 times in a row, sometimes I have to skip forward or backward to "fix" the stuttering. I activated debug logging and the FPS number was as low as 4-6 during some of the tests. The logs are from a test I did with LG's F1 Monaco 2009 demo (downloaded from here). Rebooted the machine, resumed play of the demo file (from about 15 seconds in), a lot of stuttering, did some pause/play testing to see if it fixed the problem. After the last pause/play video was smooth again. xbmc.log, kernel.log and mediainfo Mac Mini 1.83 C2D, 2 GB RAM, BCM70012, OS X 10.6.4, Dharma Beta 3. - nielsvlaarhoven - 2010-10-21 Hello Davila, I am trying to get my bcm70015 card to work for 2 weeks now and no succes. I can't see the broadcom bcm70015 in the render method list. I am running osx version 3.0.2 Can u help me please?! I have read the posts from other people with a simular problem but it doesn't help me. This is my dmesg log file: PHP Code: hi mem tramps at 0xffe00000 Can you please tell me what to do to solve the problem and maybe a little help with how to do this, i am not a linux expert. (actually not even close!) Thanks in advance - davilla - 2010-10-21 crystalhd does not appear in render list any more, it has it's own check box below the render setting. dmesg show crystalhd driver is running. need to see xbmc.log next. use a pastebin site like http://www.pastebin.com |