•   
  • 1
  • 20
  • 21
  • 22(current)
  • 23
  • 24
  • 156
  •   
  Thread Closed
OpenELEC Testbuilds for RaspberryPi Part 3 (Kodi 14.0)
"Failed to stop xbmc-service.service: Unit xbmc-service.service not loaded." is the response i get, when i try to execute "systemctl stop xbmc-service".

But without the "-service" prefix it works.

So, i did the steps you mentioned, and the load is the same.

Roundabout 70% right now, 5 minutes after bootup.

Edit: this is the freshest log i have, maybe its useful: http://xbmclogs.com/show.php?id=204351
(2014-05-18, 13:22)ken_s Wrote: Seeing the same as RaVeNV1, cpu 70-80% with no activity.
This is with a new xbmc folder.

You're measuring this with top (or maybe bcmstat.sh)?

Because right now, with stock Confluence, I'm seeing under 20% (actually, with rbphdmi having switched off the HDMI, I'm currently seeing a total load of 14-15%).

(2014-05-18, 13:23)RaVeNV1 Wrote: But without the "-service" prefix it works.

Sorry duff instructions, wrote it from memory - yes, remove the -service - have updated the original post.
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
top says: 390 1 root R 306m 82.0 0 73.5 /usr/lib/xbmc/xbmc.bin --standalone -fs --lircdev /run/lirc/lircd


CPU load over 70%, but it switches between 60% and 80%, as i mentioned.
Can you paste the output from "pstree $(pidof xbmc.bin)" - it won't help much, but it's difficult to "see" what xbmc is doing unless it outputs something... pstree should show the threads belonging to the xbmc.bin process.
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
OpenELEC:~ # pstree $(pidof xbmc.bin)
xbmc.bin-+-2*[{AESink}]
|-{ActiveAE}
|-{AirPlayServer}
|-4*[{CECAdapter}]
|-{CRBPWorker}
|-{EventServer}
|-{HCEC Notify}
|-{HDispmanx Notif}
|-{HTV Notify}
|-{ILCS_HOST}
|-{JobWorker}
|-4*[{LanguageInvoker}]
|-{PeripBusCEC}
|-{PeripBusUSBUdev}
|-{TCPServer}
|-{VCHIQ completio}
|-2*[{libmicrohttpd}]
`-2*[{xbmc.bin}]
The only obvious difference between your threads and my threads is you have "4*[{CECAdapter}]" threads - I've disabled CEC in XBMC as my monitor has no CEC support.

What happens if you turn off/disable CEC - any change?

Edit: I've enabled the CEC adapter on my Pi and after restarting XBMC I also have the "4*[{CECAdapter}]" threads but after a few minutes load is hovering around 20% so that's not likely to be the reason unless libcec is going bananas on your system for some reason.
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
It remains the same.

xbmc.bin-+-2*[{AESink}]
|-{ActiveAE}
|-{AirPlayServer}
|-{CRBPWorker}
|-{EventServer}
|-{HCEC Notify}
|-{HDispmanx Notif}
|-{HTV Notify}
|-{ILCS_HOST}
|-{JobWorker}
|-4*[{LanguageInvoker}]
|-{PeripBusCEC}
|-{PeripBusUSBUdev}
|-{TCPServer}
|-{VCHIQ completio}
|-2*[{libmicrohttpd}]
`-2*[{xbmc.bin}]


Edit: Suddenly, there's no disk image of your build, i would try it with a clean and fresh install of your build.

I installed OE 4.0.1 first via disk image, and then updated to your build via OpenELEC Dev Update.
Maybe there was a failure, i dont know, i'm not familiar with this.
Code:
top -H
Will show the CPU usage of each thread.
(2014-05-18, 14:34)popcornmix Wrote:
Code:
top -H
Will show the CPU usage of each thread.

Sadly, not on OpenELEC... Sad

(maybe I can build "real" top somehow...)
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
OpenELEC:~ # top -H
top: invalid option -- 'H'
BusyBox v1.22.1 (2014-05-16 19:17:29 BST) multi-call binary.

Usage: top [-b] [-nCOUNT] [-dSECONDS] [-m]

Provide a view of process activity in real time.
Read the status of all processes from /proc each SECONDS
and display a screenful of them.
Keys:
N/M/P/T: show CPU usage, sort by pid/mem/cpu/time
S: show memory
R: reverse sort
H: toggle threads, 1: toggle SMP
Q,^C: exit

Options:
-b Batch mode
-n N Exit after N iterations
-d N Delay between updates
-m Same as 's' key



Code:
tc/eventlircd.d --socket=/run/lirc/lircd --release=_UP
  358     1 root     S     2092  0.5   0  0.0 /usr/bin/rpcbind
   51     2 root     SW<      0  0.0   0  0.0 [VCHIQr-0]
   68     2 root     SW       0  0.0   0  0.0 [mmcqd/0]
    9     2 root     SW       0  0.0   0  0.0 [rcu_preempt]
   50     2 root     SW<      0  0.0   0  0.0 [VCHIQ-0]
   93     2 root     SW<      0  0.0   0  0.0 [loop0]
   21     2 root     SW       0  0.0   0  0.0 [khubd]
   87     2 root     SW       0  0.0   0  0.0 [ext4lazyinit]
   10     2 root     SW       0  0.0   0  0.0 [rcuop/0]
  183     2 root     SW       0  0.0   0  0.0 [kworker/0:3]
    3     2 root     SW       0  0.0   0  0.0 [ksoftirqd/0]
   85     2 root     SW       0  0.0   0  0.0 [jbd2/mmcblk0p2-]
   15     2 root     SW       0  0.0   0  0.0 [watchdog/0]
   61     2 root     SW       0  0.0   0  0.0 [kworker/u2:2]
    6     2 root     SW       0  0.0   0  0.0 [kworker/u2:0]
   22     2 root     SW       0  0.0   0  0.0 [kworker/0:1]
    2     0 root     SW       0  0.0   0  0.0 [kthreadd]
    4     2 root     SW       0  0.0   0  0.0 [kworker/0:0]
    5     2 root     SW<      0  0.0   0  0.0 [kworker/0:0H]
    7     2 root     SW       0  0.0   0  0.0 [rcuc/0]
    8     2 root     SW       0  0.0   0  0.0 [rcub/0]
   11     2 root     SW       0  0.0   0  0.0 [rcu_sched]
   12     2 root     SW       0  0.0   0  0.0 [rcuos/0]
   13     2 root     SW       0  0.0   0  0.0 [rcu_bh]
   14     2 root     SW       0  0.0   0  0.0 [rcuob/0]
   16     2 root     SW<      0  0.0   0  0.0 [khelper]
   17     2 root     SW       0  0.0   0  0.0 [kdevtmpfs]
   18     2 root     SW<      0  0.0   0  0.0 [writeback]
   19     2 root     SW<      0  0.0   0  0.0 [bioset]
   20     2 root     SW<      0  0.0   0  0.0 [kblockd]
   23     2 root     SW<      0  0.0   0  0.0 [rpciod]
   26     2 root     SW       0  0.0   0  0.0 [kswapd0]
   27     2 root     SW       0  0.0   0  0.0 [fsnotify_mark]
   28     2 root     SW<      0  0.0   0  0.0 [nfsiod]
   29     2 root     SW<      0  0.0   0  0.0 [cifsiod]
   30     2 root     SW       0  0.0   0  0.0 [jfsIO]
   31     2 root     SW       0  0.0   0  0.0 [jfsCommit]
   32     2 root     SW       0  0.0   0  0.0 [jfsSync]
   33     2 root     SW<      0  0.0   0  0.0 [xfsalloc]
   34     2 root     SW<      0  0.0   0  0.0 [xfs_mru_cache]
   35     2 root     SW<      0  0.0   0  0.0 [xfslogd]
   36     2 root     SW<      0  0.0   0  0.0 [crypto]
   52     2 root     SW<      0  0.0   0  0.0 [VCHIQs-0]
   53     2 root     SW<      0  0.0   0  0.0 [iscsi_eh]
   54     2 root     SW<      0  0.0   0  0.0 [bcm2708_spi.0]
   55     2 root     SW<      0  0.0   0  0.0 [dwc_otg]
   56     2 root     SW<      0  0.0   0  0.0 [DWC Notificatio]
   57     2 root     SW       0  0.0   0  0.0 [kworker/u2:1]
   58     2 root     SW<      0  0.0   0  0.0 [ipv6_addrconf]
   59     2 root     SW<      0  0.0   0  0.0 [bioset]
   60     2 root     SW<      0  0.0   0  0.0 [deferwq]
   86     2 root     SW<      0  0.0   0  0.0 [ext4-rsv-conver]
  135     2 root     SW       0  0.0   0  0.0 [kworker/0:2]
  255     2 root     SW       0  0.0   0  0.0 [kworker/u2:3]
  401     2 root     SW       0  0.0   0  0.0 [VCHIQka-0]
OK, this is just a hack but should work... I've grabbed top from Raspbian:

Code:
cd /storage
mkdir fulltop
cd fulltop
wget http://www.nmacleod.com/public/fulltop.tar.gz -qO - | tar xzf -

Now "/storage/fulltop/fulltop.sh -H" should work on OpenELEC.

Fellas, please use [code] tags when posting formatted results... makes reading that bit easier!
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
Code:
OpenELEC:~/fulltop # /storage/fulltop/fulltop.sh -H
top - 12:57:32 up 9 min,  1 user,  load average: 1.02, 1.00, 0.60
Threads: 100 total,   2 running,  98 sleeping,   0 stopped,   0 zombie
%Cpu(s): 55.0 us,  7.3 sy,  1.7 ni, 36.1 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
KiB Mem:    381356 total,   356820 used,    24536 free,    34420 buffers
KiB Swap:        0 total,        0 used,        0 free,   275284 cached


PID USER      PR  NI  VIRT  RES  SHR S  %CPU %MEM    TIME+  COMMAND
  392 root      20   0  303m  39m  16m R  52.9 10.7   5:03.00 xbmc.bin
  410 root      21   1  303m  39m  16m S   2.9 10.7   0:09.88 PeripBusCEC
   51 root       1 -19     0    0    0 S   2.3  0.0   0:13.40 VCHIQr-0
  468 root      20   0  2880 1236  924 R   1.6  0.3   0:00.29 top
  409 root      20   0  303m  39m  16m S   1.3 10.7   0:11.87 CECAdapter
  402 root      19  -1  303m  39m  16m S   1.0 10.7   0:04.10 VCHIQ completio
  441 root      20   0  303m  39m  16m S   0.6 10.7   0:03.25 LanguageInvoker
    9 root      20   0     0    0    0 S   0.3  0.0   0:01.83 rcu_preempt
   50 root       1 -19     0    0    0 S   0.3  0.0   0:02.86 VCHIQ-0
  183 root      20   0     0    0    0 S   0.3  0.0   0:00.29 kworker/0:3
  202 avahi     20   0  2656 1500 1308 S   0.3  0.4   0:00.61 avahi-daemon
    1 root      20   0  3744 2408 1544 S   0.0  0.6   0:02.67 systemd
    2 root      20   0     0    0    0 S   0.0  0.0   0:00.00 kthreadd
    3 root      20   0     0    0    0 S   0.0  0.0   0:00.35 ksoftirqd/0
    4 root      20   0     0    0    0 S   0.0  0.0   0:00.00 kworker/0:0
    5 root       0 -20     0    0    0 S   0.0  0.0   0:00.00 kworker/0:0H
    7 root      -2   0     0    0    0 S   0.0  0.0   0:00.00 rcuc/0

Thats the output.

I must mention, that I formatted the SD, installed OE 4.0.1 and then updated to your build.

So no addons, scripts etc. installed anymore. Just your "naked" build.
[code] tags would make that output a lot more readable... just saying (again).
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
and rather use pastebin.com to not dump this on our forum
Read/follow the forum rules.
For troubleshooting and bug reporting, read this first
Interested in seeing some YouTube videos about Kodi? Go here and subscribe
Try:
Code:
/storage/fulltop/fulltop.sh -H -p $(pidof xbmc.bin)
and while top is running, press T (capital T!) so that processes and threads are sorted by cumulative time - this should result in the "busy" thread bubbling to the top...

(2014-05-18, 15:10)Martijn Wrote: and rather use pastebin.com to not dump this on our forum
For a relatively small number of lines I don't see the harm. For longer logs, you're absolutely correct.
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
  •   
  • 1
  • 20
  • 21
  • 22(current)
  • 23
  • 24
  • 156
  •   
  Thread Closed
 
Thread Rating:
  • 8 Vote(s) - 4.88 Average



Logout Mark Read Team Forum Stats Members Help
OpenELEC Testbuilds for RaspberryPi Part 3 (Kodi 14.0)4.888
This forum uses Lukasz Tkacz MyBB addons.