[Little_Kitty]

and did journalctl -a | pastebinit
i hope this is the correct command needed.

http://sprunge.us/KhAh

Thanks Little_Kitty but when the "debug log" is requested, this means kodi.log (with debug enabled), ie.:

Code:

cat /storage/.kodi/temp/kodi.log | pastebinit

understood
http://sprunge.us/UJab

[Milhouse]

New LibreELEC.tv Krypton build #0630: RPi / RPi2
(Supercedes previous build)

Code:

# uname -a
Linux rpi512 4.6.3 #1 Thu Jun 30 21:19:50 BST 2016 armv6l GNU/Linux

# vcgencmd version
Jun 27 2016 17:27:06
Copyright (c) 2012 Broadcom
version 1e7b8e2c9a7319f7b22869f1334c66e2cfc99f4a (clean) (release)

# lsb_release
LibreELEC (Milhouse) - Version: devel-20160630211843-#0630-g7fe5c29 [Build #0630]

# vcdbg log msg 2>&1 | grep DTOK
002453.878: Kernel trailer DTOK property says yes

# Kernel device tree status: Enabled

Based on tip of LibreELEC.tv master (7fe5c296, changelog) and tip of XBMC master (f3ca4eaf, changelog) with the following modifications:

• Includes newclock5 patches
  
• Excludes the LibreELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-4.6.y
  
• Includes latest bcm2835-driver master (1ba9c9ae)
  
• Includes latest kodi-platform master (c8188d82)
  
• Includes latest libcec master (6d68d212)
  
• Includes latest libnfs master (d9e75d56, ahead +31)
  
• Includes latest p8-platform master (041a8c6c, ahead +1)
  
• Includes latest addons: adsp.basic (2ae604e5), adsp.biquad.filters (5849a194, +7), adsp.freesurround (34f50406), asplib (da66f517), inputstream.mpd (b171dffe), inputstream.rtmp (8cebd150), inputstream.smoothstream (a38d40a2), peripheral.joystick (2db8029e), pvr.argustv (e536f32e), pvr.demo (01c68c88), pvr.dvblink (5f9872ca), pvr.dvbviewer (35902f5d), pvr.filmon (efd379b8), pvr.hdhomerun (a71e816d), pvr.hts (343ca980), pvr.iptvsimple (1ea1f36e), pvr.mediaportal.tvserver (369b0189), pvr.mythtv (9141c6fc), pvr.nextpvr (7ed3111c), pvr.njoy (b5d65655), pvr.pctv (12d8baf1), pvr.stalker (b465352b, +1), pvr.vbox (b24c3cac), pvr.vdr.vnsi (5d5bb64e), pvr.vuplus (c988f849), pvr.wmc (ef4cf3b1)
  
• Include [env] e7cbe9cb: xf86-video-intel: Explicitely disable TearFree and TripleBuffer
  
• Include [env] ed774729: Intel: Implement Passthrough-Range
  
• Include [env] 98c65e6a: Kodi: Use Limited Range by default
  
• Include [env] patch: Enable other binary addons
  
• Include [env] patch: Add extra headers needed by 3D BD MVC
  
• Include [env] patch: Enable pvr and adsp addons, disable pvr/adsp updates
  
• Include [env] patch: Bump libbluray - include MVC support
  
• Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.*, os.* and peripheral.*
  
• Include [env] patch: Add experimental splash video for RPi
  
• Include [env] patch: ffmpeg: update to ffmpeg 3.1, minimal Kodi specific commits
  
• Include [env] PR:477: ffmpeg: rework
  
• Revert [env] 46b9b7b3: rtmpdump (Reason: use newclock5 bump)
  
• Include [pkg] patch: drm/i915: Extend Fake HDMI live status to Valley View (linux)
  
• Include [pkg] patch: [skin.estuary] Hide watched items on home (kodi-theme-Estuary)
  
• Include [pkg] PR:8645: [video] Add season/TV show artwork to episodes/seasons even if they have their own fanart.
  
• Include [pkg] PR:8824: videodb: fix smart playlists not honoring "Show empty TV shows" setting.
  
• Include [pkg] PR:8922: [guiinfo] extend ranges for listitem properties
  
• Include [pkg] PR:9803: [PeripheralCecAdapter] fix playback stopping on screensaver deactivated
  

Build Highlights:

1. New Kodi splash for Alphas
   
2. Updated ffmpeg 3.1 with fixes for DVD menus
   

Build Details:

1. LibreELEC.tv:
   • hyperion: fix compile error (PR:501, 1 commit, 1 file changed)
     
2. XBMC:
   • [PVR] Guide window: Fix timer icons for manual (not epg-tag based) timers (PR:10042, 2 commits, 8 files changed)
     
   • updated splash for Krypton alphas (f3ca4eaf)
     
3. pvr.stalker:
   • [debian] add libxml2 to build dependencies (PR:67, 1 commit, 1 file changed)
     
4. newclock5:
   • New commits in this build:
     • mmalffmpeg: Move gpu image pool into a separate class (8801d8ec)
       
   • Commits no longer in build:
     • fixup! mmalrenderer: Execute callbacks from main thread (bc482f41)
       
5. Additional commits/pull requests/changes not yet merged upstream:
   • Added: [env] patch: ffmpeg: update to ffmpeg 3.1, minimal Kodi specific commits
     

[TristanTeufel]

hello

just wanted to ask if there is an update on this lirc/gpio issue?

using build 630 im still not able to control kodi using my ir diode connected to the gpio's.

if i press "up" its like i have pressed "up" 6 times.
"ok" is not working at all.

such strange behavior is on all remotes (not just ir) if the ir diode is connected to the gpio's.

if i remove the ir diode and restart the pi all none ir remotes are working flawless.

rollback to an older build resolves this issue.

regards
tristan

[smp1]

Any 1080i (both 50Hz and 60Hz) videos don't play at all in build #0630.

Sample: https://docs.google.com/uc?id=0Bw7pv6UJO...t=download

[Milhouse]

hello

just wanted to ask if there is an update on this lirc/gpio issue?

using build 630 im still not able to control kodi using my ir diode connected to the gpio's.

No updates yet, although it continues to be investigated.

[popcornmix]

Any 1080i (both 50Hz and 60Hz) videos don't play at all in build #0630.

The sample plays okay for me. Did it play for you with #0629?
Does adjusting any settings make it work?
e.g. deinterlace, omxplayer, mmal, "sync playback to display", "adjust display refresh rate to match video"?

[bill_orange]

Any 1080i (both 50Hz and 60Hz) videos don't play at all in build #0630.

The sample plays okay for me. Did it play for you with #0629?
Does adjusting any settings make it work?
e.g. deinterlace, omxplayer, mmal, "sync playback to display", "adjust display refresh rate to match video"?

Plays fine here to on a PI3. That's a whole lotta resolution!

[smp1]

The sample plays okay for me. Did it play for you with #0629?

I rebooted the RPi3 and now it plays fine. My bad I guess. It didn't work after the 1-st boot when I upgraded from 0625 to 0630.

[smp1]

I rebooted the RPi3 and now it plays fine.

Ok, I did more testing and there is definitely a bug in #0630. After you play a HEVC video - all 1080i videos will become unplayable (regardless of codec used) until you reboot the RPi. This would only happen with some HEVC videos.

A sample of problematic HEVC video: https://docs.google.com/uc?id=0Bw7pv6UJO...t=download

[popcornmix]

Ok, I did more testing and there is definitely a bug in #0630. After you play a HEVC video - all 1080i videos will become unplayable (regardless of codec used) until you reboot the RPi. This would only happen with some HEVC videos.

I'm still not seeing this. Is it enough to (from a reboot) play the HEVC sample for a few seconds, press stop and then play the 1080i sample?
Can you post a debug log (wiki)?

[smp1]

Try to play it a few times, I can easily reproduce it:
1. Play the HEVC sample for a few seconds, press STOP.
2. Try to play an 1080i AVC sample.

I will post a debug log a bit later.

[smp1]

Debug log: http://sprunge.us/VOBf

[Aux_]

A sample of problematic HEVC video: https://docs.google.com/uc?id=0Bw7pv6UJO...t=download

I have no problem with playing the sample on RPi3, but that is not running so smoothly as other videos.

[MikeKL]

Noticing a good improvement with iplayerwww and the higher quality Wimbledon Limelight live streams in latest 0630 build?
Well first time had higher quality stream running for long periods without starting to video/audio stutter after a while... hoping it's not a placebo effect

Thanks for all the hard work with the nightly builds

----Edit----- Just watched full match, Wales 3:1 Belgium, what a great game of football and not a single drop/pause in 3.1Mpbs Limelight stream for whole match -----

[popcornmix]

Try to play it a few times, I can easily reproduce it:
1. Play the HEVC sample for a few seconds, press STOP.
2. Try to play an 1080i AVC sample.

I ran a script that plays 2 seconds of each clip in a loop. It ran for hundreds of iterations.
Now, I have been tweaking the patches today, so to be sure I reverted back to the commit from last night's build,
and sure enough it failed quickly with this test.

So, not completely sure what fixed it, but hopefully it will be good again tonight.