(2017-08-24, 09:32)HiassofT Wrote:(2017-08-23, 20:55)HiassofT Wrote:(2017-08-23, 19:02)dascoco Wrote: Is there already something new?Not yet, the last few days I have been busy finding out why the tests I had planned you to run did crash the RPi2: https://github.com/raspberrypi/linux/issues/2166
Fortunately the underlying issue has just been resolved and I've PRed the changes that'll allow you to run the next tests. PR1917 should be included in the next milhouse build, if it is please do the following steps:
Add the following to the end of /flash/cmdline.txt:
Code:trace_event=module:* ftrace=function ftrace_filter=__request_module
Your cmdline.txt should then look like this (everything must be in a single line):
Code:boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet trace_event=module:* ftrace=function ftrace_filter=__request_module
Now power off the RPi, connect the HDD, power it up, then ssh in and post the outputs of these 2 commands:
Code:dmesg | paste
cat /sys/kernel/debug/tracing/trace | paste
This should hopefully give us some more clues what's happening on your system.
so long,
Hias
Milhouse build 0823 contains the PR needed to run these tests. Can you give it a try?
It would also be good to know if you added some custom configuration (modprobe, systemd, udev etc). Please also post the output of the following command:
Code:ls -lR /storage/.config /storage/.cache | paste
so long,
Hias
(2017-08-24, 18:05)dascoco Wrote:(2017-08-24, 09:32)HiassofT Wrote:(2017-08-23, 20:55)HiassofT Wrote: Not yet, the last few days I have been busy finding out why the tests I had planned you to run did crash the RPi2: https://github.com/raspberrypi/linux/issues/2166
Fortunately the underlying issue has just been resolved and I've PRed the changes that'll allow you to run the next tests. PR1917 should be included in the next milhouse build, if it is please do the following steps:
Add the following to the end of /flash/cmdline.txt:
Code:trace_event=module:* ftrace=function ftrace_filter=__request_module
Your cmdline.txt should then look like this (everything must be in a single line):
Code:boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet trace_event=module:* ftrace=function ftrace_filter=__request_module
Now power off the RPi, connect the HDD, power it up, then ssh in and post the outputs of these 2 commands:
Code:dmesg | paste
cat /sys/kernel/debug/tracing/trace | paste
This should hopefully give us some more clues what's happening on your system.
so long,
Hias
Milhouse build 0823 contains the PR needed to run these tests. Can you give it a try?
It would also be good to know if you added some custom configuration (modprobe, systemd, udev etc). Please also post the output of the following command:
Code:ls -lR /storage/.config /storage/.cache | paste
so long,
Hias
# dmesg | paste
http://sprunge.us/cRHj
# cat /sys/kernel/debug/tracing/trace | paste
http://sprunge.us/fcdg
# ls -lR /storage/.config /storage/.cache | paste
http://sprunge.us/KFdO
[ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1440 bcm2708_fb.fbheight=900 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet trace_event=module:* root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kernel.img usbcore.autosuspend=-1
# uname -a
Linux rpi512 4.12.8 #1 Thu Aug 24 21:58:07 BST 2017 armv6l GNU/Linux
# vcgencmd version
Aug 22 2017 14:20:40
Copyright (c) 2012 Broadcom
version eb51b8b84ec11d98562dfbb7be53cdd216c0ea4c (clean) (release)
# lsb_release
LibreELEC (Milhouse): devel-20170824215656-#0824-gab9d8bf [Build #0824]
# Kodi version
(18.0-ALPHA1 Git:beb2913). Platform: Linux ARM 32-bit
(2017-08-24, 23:34)Milhouse Wrote: Build Highlights:
- New 4.12.8 kernel
- inputstream.adaptive: add search list for libssd_wv.so
- inputstream.adaptive: sort impaired (audio description) streams last (ping @Pienoet)
- inputstream.adaptive: build improvements
(2017-08-25, 22:42)Milhouse Wrote: Wouldn't it have been easier to reconfigure your new router to use the same IP settings as your old router?
# uname -a
Linux rpi512 4.12.9 #1 Fri Aug 25 22:24:25 BST 2017 armv6l GNU/Linux
# vcgencmd version
Aug 22 2017 14:20:40
Copyright (c) 2012 Broadcom
version eb51b8b84ec11d98562dfbb7be53cdd216c0ea4c (clean) (release)
# lsb_release
LibreELEC (Milhouse): devel-20170825222320-#0825-g1ca3686 [Build #0825]
# Kodi version
(18.0-ALPHA1 Git:e35491d). Platform: Linux ARM 32-bit
(2017-08-25, 14:24)HiassofT Wrote: @dascoco I found out why exfat didn't work, a fix for that should be in tonight's build. No need for any more logs, but please report back when the issue is fixed.
so long,
Hias
(2017-08-24, 15:46)SpokV Wrote: Hi. I'm using netflix addon and for a minute or two it seems ok.but after that I'm experiencing buffering alot.
Is there any special configuration to the inputstream or anything else?
Thanks
(2017-08-26, 09:10)thent Wrote: Slighty offtopic: I'd like to update my Pi2 via script, would it be possible to provide a static link which always points to the very latest release of yours?
Thank you!
regards
